Advertisement

The Thermal Conductivity, Electrical Resistivity, and Seebeck Coefficient of SRM-735

  • R. S. Graves
  • R. K. Williams
  • J. P. Moore

Abstract

The thermal conductivity of an austenitic stainless steel standard (SRM-735) was measured in two apparatus over the combined temperature range from 20 K to 970 K and found to be within the uncertainty band claimed by the NBS above 60 K. The results were in error by as much as 4% below 60 K because of limited sensitivity of the detection instrument and low sensitivity of the thermocouples. The electrical resistivity results were within the uncertainty claimed for the standard.

Keywords

Thermal Conductivity Electrical Resistivity Austenitic Stainless Steel SEEBECK Coefficient Lattice Component 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J. P. Moore, D. L. McElroy, and R. S. Graves, ORNL-4986 (Sept. 1974).Google Scholar
  2. 2.
    J. P. Moore, R. K. Williams, and R. S. Graves, J. Appl. Phys. 48 (2), (February 1977).Google Scholar
  3. 3.
    C. R Brinkman, R. K. Williams, R. L. Klueh, and T. L. Hebble, Nucl. Tech. 28, 490 (March 1976).Google Scholar
  4. 4.
    J. P. Moore, T. G. Godfrey, R. S. Graves, F. J. Weaver, and W. P. Eatherly, J. Nucl. Mater. 78, 131–142 (1978).CrossRefGoogle Scholar
  5. 5.
    J. P. Moore, R. S. Graves, and D. L. McElroy, Nucl. Tech. 22, 88 (1974).Google Scholar
  6. 6.
    J. G. Hust and P. J. Giarratano, “Thermal Conductivity and Electrical Resistivity Standard Reference Materials: Austenitic Stainless Steel, SRMs 735 and 798, from 4 to 1200 K,” NBS Special Publication 260–46 (March 1975).Google Scholar

Copyright information

© Purdue Research Foundation 1983

Authors and Affiliations

  • R. S. Graves
    • 1
  • R. K. Williams
    • 1
  • J. P. Moore
    • 1
  1. 1.Metals and Ceramics DivisionOak Ridge National LaboratoryOak RidgeUSA

Personalised recommendations