Abstract
The use of gas sensors for monitoring and controlling combustion processes to improve efficiency and reduce emissions has long been established.(1) Generally to achieve control of combustion processes the air-to-fuel ratio of the process needs to be determined. As the air-to-fuel ratio is related to the oxygen concentration in the exhaust gases, oxygen has become a critical gas for sensors to measure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
D. E. Williams and P. McGeehin, R. Chem. Soc. Specialist Periodical Reports on Electrochemistry, Vol. 9, pp. 246–250 (1984).
D. S. Eddy, Physical principles of the zirconia exhaust gas sensor, IEEE Trans. Vehicular Technol. VT-23(4), 125–128 (1974).
H. U. Gruber and H. M. Wiedenmann, Three years field experience with the lambda-sensor in automotive control systems, Robert Bosch GmbH, Society of Automotive Engineers Report No. 800017 (February 1980).
H. C. Lord, In stack monitoring of gaseous pollutants, Australian Proc. Eng. 7(2), 27, 29–31 (February 1979).
D. L. May, Cutting boiler fuel costs with combustion controls, Chem. Eng. 82(27), 53–57 (1975).
P. Roy, Metal slag gas reactions and processes, Electrochem, Soc. 919 (1975).
P. Smith, Int. Conf. Liquid. Met. Technology in Energy Prodn. Proceedings p. 631 (1976).
J. Watson and R. A. Yates, A solid state gas sensor, Electron. Eng. May, 47–57 (1985).
P. Kofstad, Nonstoichiometry Diffusion and Electrical Conductivity in Binary Metal Oxides, Wiley, New York (1972), pp. 1–14.
P. Kofstad, Nonstoichiometry, Diffusion, and Electrical Conductivity in Binary Metal Oxides, Wiley, New York (1972), pp. 139–152.
J. D. Baumard, J. Chem. Phys. 67(3), 857–860 (1977).
D. E. Williams, Solid State Gas Sensors, Adam Hilger, London (1987), pp. 75–80.
C. T. Engh, Development of the Volvo Lambda-Sond system, Society of Automotive Engineers Report No. 770295 (February 1977).
W. S. Fleming, D. S. Howarth, and D. S. Eddy, General Motors, sensor for on vehicle detection of engine exhaust gas composition, Society of Automotive Engineers Report No. 730575 (May 1973).
E. F. Gibbons, A. H. Meitzler, L. R. Foote, P. J. Zacmandis, and G. L. Beuudain, Ford Motor Co., Society of Automotive Engineers Report No. 750224 (February 1975).
M. J. Esper, E. M. Logothetis, and J. C. Chu, Ford Motor Co., Titania Exhaust Gas Sensor for Automotive Applications, Society of Automotive Engineers Report No. 790140 (January 1979).
T. Kamo, Y. Chujo, T. Akatsuka, and J. Nakano (Toyota Motor Corp.), and M. Suzuki (Nippondenso Co. Ltd.), Lean mixture sensor, Society of Automotive Engineers Report No. 850380 (March 1985).
R. Hetrick, W. A. Fate, and W. C. Vassell, Ford Motor Co., Oxygen Sensing by Electrochemical Pumping, Society of Automotive Engineers Report No. 810433 (April 1981).
S. Soejima and S. Mase, NGK Insulators Ltd., Multilayered Zirconia Oxygen Sensor for Lean Burn Application, Society of Automotive Engineers Report No. 850378 (March 1985).
B. C. Tofield, The study of electron distributions in organic solids, Progress in Inorganic Chemistry (S. J. Lippard, ed.), Wiley, New York(1976).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1991 Springer Science+Business Media New York
About this chapter
Cite this chapter
Yates, A. (1991). Exploiting Semiconducting Oxides for Automotive Exhaust Gas Oxygen Sensors. In: Miller, L.S., Mullin, J.B. (eds) Electronic Materials. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-3818-9_33
Download citation
DOI: https://doi.org/10.1007/978-1-4615-3818-9_33
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-6703-1
Online ISBN: 978-1-4615-3818-9
eBook Packages: Springer Book Archive