Abstract
The world-wide competitive economy is forcing us to utilize fully the best equipment and techniques available with efficient control of organizational structure to produce high quality, well-designed products at lower prices and in less time. Increasing awareness is being directed to the product design phase, because the more advanced CIM technologies are of little consequence unless the product design lends itself to the overall system utilizing all available and relevant technologies. For instance, the following statements represent the significance of product design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Achterberg, R.C. (1974) Product design for automatic assembly, AS ME Paper, No. AD 74–435.
Ahluwalia, R.S. and Ji, P. (1990) Process planning in concurrent engineering environment, 1990 International Industrial Engineering Conference Proceedings, pp. 535–40.
Allen, C. W. (ed.) (1990) Simultaneous Engineering: integrating manufacturing and design, Society of Manufacturing Engineers, Dearborn, MI.
Alting, L. and Zhang, H. (1989), International Journal of Production Research, 27 (4) 553–85.
Anand, D.K., Kirk, J.A., Anjanappa, M. and Chen, S. (1988) Cell control structure of FMP for rapid prototyping, Advances in Manufacturing Systems Engineering, ASME (Publication) PED, 31, 89–99. Presented at the ASME Winter Annual Meeting, Chicago, IL.
Anand, D.K., Kirk, J.A., Anjanappa, M., Nau, D. and Magrab, E. (1988) Protocol for flexible manufacturing automation with heuristics and intelligence, Proceedings of the Manufacturing International ′88, Atlanta, Ga, May, 209–17.
Anjanappa, M., Courtright, M.J., Anand, D.K. and Kirk, J.A. (1989) Manufactur-ability Analysis for a Flexible Manufacturing Cell, ASME Design Engineering Division (Publication) DE, 19-1, 303–8.
Bahler, D., Bowen, J., O’Grady, P. and Young, R.E. (1990) in, Issues in Design/Manufacturing Integration, (ed. A. Shron) presented at the Winter Annual Meeting of the ASME, Dallas, TX, November, 25–30
Bahler, D., Bowen, J., O’Grady, P. and Young, R.E. (1990) in, Issues in Design/Manufacturing Integration, (ed. A. Shron) presented at the Winter Annual Meeting of the ASME, Dallas, TX, November, 59–67.
Boothroyd, G. (1982) Assembly Engineering, March, 42–5.
Boothroyd, G. (1988) American Machinist, 132, August, 54–7.
Bowen, J. and Bahler, D. (1992) Constraint nets for life cycle engineering: negotiation among multiple perspectives in an interactive design advisor, Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, G A, January, 8–10
Bowen, J. and Bahler, D. (1992) Constraint nets for life cycle engineering: negotiation among multiple perspectives in an interactive design advisor, Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, G A, January, 661–4.
Bowen, J., O’Grady, P. and Smith, L. (1990) Artificial Intelligence in Engineering, 5 (4), 206–20.
Burling, W.A, Lax, B.J.B, O’Neill, L.A. and Pennino, T.P. (1987) AT&T Technical Journal, 66, (5), 21–38.
Charles, D.P.S.T. (1989) Simultaneous engineering, AUTOFACT ′89, Conference Proceedings, Detroit, Michigan, October 30–Nov. 2,
Charles, D.P.S.T. (1989) Simultaneous engineering, AUTOFACT ′89, Conference Proceedings, Detroit, Michigan, October 30–Nov. 14.1–14.6.
Chisholm, A.W.J. (1973) Annals of the CIRP, 22, (2), 243–47.
Choi, B.K., Barash, M.M. and Anderson, D.C. (1984) Computer Aided Design, 16, 81–6.
Chung, M.J. and Kim, S. (1990) An object-oriented VHDL environment, Proceedings of the 27th ACM/IEEE Design Automation Conference, Orlando, FL, June, 24–28
Chung, M.J. and Kim, S. (1990) An object-oriented VHDL environment, Proceedings of the 27th ACM/IEEE Design Automation Conference, Orlando, FL, June, 431–6.
Conradson, S.A., Barford, LA, Fisher, W.D, Weinstein, M.J. and Wilker, J.D. (1988) Manufacturability tools: an engineer’s use and needs, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 10–12
Conradson, S.A., Barford, LA, Fisher, W.D, Weinstein, M.J. and Wilker, J.D. (1988) Manufacturability tools: an engineer’s use and needs, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 155–8.
Correia, M. and Freeman III, W.J. (1988) Building the bridge between design and manufacture, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 10–12
Correia, M. and Freeman III, W.J. (1988) Building the bridge between design and manufacture, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 45–50.
Creese, R.C. and Moore, L.T. (1990) Cost Engineering, 32, (6) 23–6.
Cunningham, J.J. and Dixon, J.R. (1988) Designing with features: the origin of features, Computers in Engineering 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, California, July 31–August, 4, 1
Cunningham, J.J. and Dixon, J.R. (1988) Designing with features: the origin of features, Computers in Engineering 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, California, July 31–August, 237–43.
Cutkosky, M.R. and Tenenbaum, J.M. (1990) Mechanism and Machine Theory, 25, (3), 365–81.
Daniel, J. and Director, S.W. (1989) An object oriented approach to CAD tool control within a design framework, Proceedings of the 26th ACM/IEEE Design Automation Conference, Las Vegas, June, 25–29
Daniel, J. and Director, S.W. (1989) An object oriented approach to CAD tool control within a design framework, Proceedings of the 26th ACM/IEEE Design Automation Conference, Las Vegas, June, 197–202.
Datsko, J. (1978) International Journal of Production Research, 16, (3), 215–20.
Davies, M. (1991) The status and future of product data exchange, Proceedings of the International Conference on Computer Integrated Manufacturing, Singapore,October, 2–4
Davies, M. (1991) The status and future of product data exchange, Proceedings of the International Conference on Computer Integrated Manufacturing, Singapore,October, 259–62.
Dixon, J.R. and Duffey, M.R. (1988) Quality is not accidental — it’s designed, The New York Times, June, 26.
Dixon, J.R. and Duffey, M.R. (1990) California Management Review, Winter, 9–23.
Donovan, J.R. (1989) Proceedings of the Institution of Mechanical Engineers, Part D, 203, (1), 47–53.
Dransfield, J.D. (1990) Proceedings of Manufacturing International ′90, 5, Atlanta, Ga, March, 25–28
Dransfield, J.D. (1990) Proceedings of Manufacturing International ′90, 5, Atlanta, Ga, March, 27–32.
Dwivedi, S.N. and Klein, B.R. (1986) CIM Review, 2 (3), 53–9.
Edosomwan, J.A. (1988) Implementing the concept of early manufacturing involvement (EMI) in the design of a new technology, Technology Management I, Proceedings International Conference on Technology Management, Miami, FL, February, 17–19
Edosomwan, J.A. (1988) Implementing the concept of early manufacturing involvement (EMI) in the design of a new technology, Technology Management I, Proceedings International Conference on Technology Management, Miami, FL, February, 444–50.
Evans, B. (1988) Mechanical Engineering, February, 38–9.
Fiduk, K.W, Kleinfeldt, S., Kosarchyn, M. and Perez, E.B. (1990) Design methodology management — a CAD framework initiative perspective, Proceedings of the ACM/IEEE Design Automation Conference, Orlando, FL, June, 24–28
Fiduk, K.W, Kleinfeldt, S., Kosarchyn, M. and Perez, E.B. (1990) Design methodology management — a CAD framework initiative perspective, Proceedings of the ACM/IEEE Design Automation Conference, Orlando, FL, June, 278–83.
Gatenby, David A. and Foo, George (1990) AT&T Technical Journal 69, (3) 2–13.
Gladman, C.A. (1968) Annals of the CIRP, 16, 3–10.
Goldhar, J.D. and Jelinek, M. (1990) Computers in Industry, 14, 225–45.
Graham, A. (1991) IEEE Design and Test of Computers, September, 12–15.
Grassman, N. and Rodriguez, E. (1989) Less reliability and maintainability… not more…is better, 1989 Proceedings of Annual Reliability and Maintainability Symposium, Atlanta, Ga, USA, January, 24–26
Grassman, N. and Rodriguez, E. (1989) Less reliability and maintainability… not more…is better, 1989 Proceedings of Annual Reliability and Maintainability Symposium, Atlanta, Ga, USA, January, 210–15.
Holbrook, A.E.K, and Sackett, P.J. (1988) Positive design advice for high precision, robotically assembled product, Developments in Assembly Automation, incorporating Proceedings 9th International Conference, March, 181–90.
Holt, D.J. (1991), Automotive Engineering, November, 26–41.
Hudson, D.C., Pang, D.-C, Kirk, J.A., Anand, D.K. and Anjanappa, M. (1990) Integrated Computer Aided Manufacturing for prototype machining Proceedings of Manufacturing International ′90. Part 2: Advances in Manufacturing Systems, Atlanta, GA, March, 25–28
Hudson, D.C., Pang, D.-C, Kirk, J.A., Anand, D.K. and Anjanappa, M. (1990) Integrated Computer Aided Manufacturing for prototype machining Proceedings of Manufacturing International ′90. Part 2: Advances in Manufacturing Systems, Atlanta, GA, March, 55–62.
Hutchison, K. and Hoffman, D.R. (1990) High Performance, April, 40–3.
Huthwaite, B. (1987) Product design for manufacture and assembly: the five fundamentals, Proceedings of the 2nd International Conference on Product Design for Manufacture and Assembly, Newport, Rhode Island , April, 6–8.
Huthwaite, B. and Spence, G. (1989) National Productivity Review, 8, (3), 239–48.
Inglesby, T. (1989) Manufacturing Systems, 7, (4), 26–32.
Jansson, D.G., Shankar, S.R. and Polisetty, F.S.K. (1990) in Design Theory and Methodology — DTM ′90, (ed. James R. Rinderle) 85–96.
Jo, H.H., Parsaei, H.R. and Wong, J.P. (1990) Computers and Industrial Engineering, 21, 35–9.
Kapur, K.C. (1984) in Handbook of Industrial Engineering (Salvandy, G., ed.), John Wiley & Sons, New York, 8.5.1–8.5.34.
Kusiak, Andrew and Park, Kwangho (1990) International Journal of Production Research, 28, (10) 1883–900.
Lim, B.S. (1987) Expert Systems, 4, (4), 252–67.
Lu, S. C.-Y. (1990), Robotics and Computer-Integrated Manufacturing, 7, (3/4), 263–77.
Lu, S. C.-Y. (1992) Knowledge processing tools to support concurrent engineering tasks, Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, G A, January 8–10, 373–9.
Lu, S. C.-Y. and Subramanyam, S. (1988) A computer-based environment for simultaneous product and process design Advances in Manufacturing System Engineering — 1988, ASME Production Engineering Division (Publication) PED, 31, 35–46. Presented at the Winter Annual Meeting of the ASME, Chicago, IL, November 27–December, 2.
Moore, L.T. and Creese, R.C. (1990) Cost prediction in concurrent engineering, 1990 International Industrial Engineering Conference Proceedings, 547–52.
Nevins, J.L. and Whitney, D.E. (1989) Concurrent Design of Products and Processes, McGraw-Hill Publishing Co., New York, New York.
O’Grady, P. and Young, R.E. (1991) Journal of Design and Manufacturing, 1, 27–34.
O’Grady, P. and Young, R.E. (1992) Constraint nets for life cycle engineering: concurrent engineering, Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, G A, January, 8–10
O’Grady, P. and Young, R.E. (1992) Constraint nets for life cycle engineering: concurrent engineering, Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, Atlanta, G A, January, 743–8.
Oliver, G.D. (1990) in Issues in Design/Manufacturing Integration (ed. A. Shron), presented at the Winter Annual Meeting of the ASME, Dallas, TX, November, 25–30
Oliver, G.D. (1990) in Issues in Design/Manufacturing Integration (ed. A. Shron), presented at the Winter Annual Meeting of the ASME, Dallas, TX, November,37–42.
Owens, N.L. (1988) Design for manufacturability in hermetic product die attach, 1988 proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October 10–12, 57–61.
Pande, S.S. and Prabhu, B.S. (1990) Computer-Aided Engineering Journal, 7, (4) August, 99–103.
Pennel, James P. and Winner, Robert I. (1989) IEEE Global Telecommunications Conference and Exhibition (GLOBECOM ′89). Part 1 (of 3), Dallas, TX, November, 27–30
Pennel, James P. and Winner, Robert I. (1989) IEEE Global Telecommunications Conference and Exhibition (GLOBECOM ′89). Part 1 (of 3), Dallas, TX, November, 647–55.
Pennell, J.P., Winner, R.L, Bertrand, H.E. and Slusarczuk, M.M.G. (1989) Concurrent Engineering: an overview for Autotestcon, AUTOTESTCON Proceedings ′89: The System Readiness Technology Conference, Philadelphia, PA, September, 25–28
Pennell, J.P., Winner, R.L, Bertrand, H.E. and Slusarczuk, M.M.G. (1989) Concurrent Engineering: an overview for Autotestcon, AUTOTESTCON Proceedings ′89: The System Readiness Technology Conference, Philadelphia, PA, September, 88–99.
Perng, D.-B, Chen, Z. and Li, R.-K. (1990) Computer-Aided Design, 22, (5) June, 285–95.
Priest, J.W. (1990) State of the art review of measurement procedures in product design for manufacturing Proceedings of Manufacturing International ′90, 5, Atlanta, Ga, March, 25–28
Priest, J.W. (1990) State of the art review of measurement procedures in product design for manufacturing Proceedings of Manufacturing International ′90, 5, Atlanta, Ga, March, 3–8.
Purssell, R.A. (1988) The product release interface: environment and concerns, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 10–12
Purssell, R.A. (1988) The product release interface: environment and concerns, 1988 Proceedings, IEEE/CHMT 5th International Electronic Manufacturing Technology Symposium, Lake Buena Vista, FL, October, 51–6.
Runciman, C. and Swift, K. (1985) Assembly Automation, 5, (3), 17–50.
Schehr, L. (1987) Manufacturing Systems, 5, (12), 24–8.
Schmitz, J.M. and Desa, S. (1989) The development and implementation of a design for producibility method for precision planar stamped products, Computer-Aided and Computational Design: Advances in Design Automation — 1989, ASME Design Engineering Division (Publication) DE, 19, (1) 295–302. Presented at the ASME Design Technical Conferences — 15th Design Automation Conference, Montreal, Quebec, Canada, September, 17–21.
Siegal, B. (1991) Industrial Engineering, 23, (12), 15–19.
Smith, R. and Cavalli, A. (1990) High Performance, June, 63–7.
Ssemakula, Mukasa E. and Satsangi, A. (1989) Computers and Industrial Engineering, 17, 234–9.
Steiner, M. and Derby S. (1988) Estimating robot assembly cycle time during product design — Part 1: algorithms, Trends and Developments in Mechanisms, Machines, and Robotics — 1988. ASME Design Engineering Division (Publication) DE, 15–3, 525–33. Presented at the 1988 ASME Design Technology Conferences — 20th Biennial Mechanisms Conference, Kissimmee, FL, September, 25–28.
Steiner, M. and Derby, S. (1988) Estimating robot assembly cycle time during product design — Part 2: case studies, Trends and Developments in Mechanisms, Machines, and Robotics — 1988, ASME Design Engineering Division (Publication) DE, 15–3, 535–41. Presented at the 1988 ASME Design Technology Conferences — 20th Biennial Mechanisms Conference, Kissimmee, FL, September, 25–28.
Steiner, M. and Derby, S. (1988) An information architecture and methodology for estimating robot assembly cycle time for producibility analysis, Computers in Engineering, 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, CA, July 31–August, 4
Steiner, M. and Derby, S. (1988) An information architecture and methodology for estimating robot assembly cycle time for producibility analysis, Computers in Engineering, 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, CA, July 31–August, 383–95.
Suh, N.P. (1990) The Principles of Design, Oxford University Press, New York, 40–2.
Suri, R. and Shimizu, M. (1989), Research in Engineering Design, 1, 105–20.
Sutherland, J.W., DeVor, R.E., Kapoor, S.G. and Ferreira, P.M. (1988) SAE Transactions, 97, 215–26.
Tomiyama, T. (1990) in Design Theory and Methodology — DTM ′90, (ed. James R. Rinderle), pp. 219–23.
Ulrich, K.T. and Fine, C.H. (1990) Proceedings of Manufacturing International ′90, 5, Atlanta, GA, March, 25–28
Ulrich, K.T. and Fine, C.H. (1990) Proceedings of Manufacturing International ′90, 5, Atlanta, GA, March, 19–25.
Unger, M.B. and Ray, S.R. (1988) Computers in Engineering 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, California, July 31 – August, 4
Unger, M.B. and Ray, S.R. (1988) Computers in Engineering 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, California, July 31 – August, 1
Unger, M.B. and Ray, S.R. (1988) Computers in Engineering 1988: Proceedings of the 1988 ASME International Computers in Engineering Conference and Exhibition, San Francisco, California, July 31 – August, 563–9.
Vannoy, E.H. (1989) 1989 IIE Integrated Systems Conference and Society for Integrated Manufacturing conference proceedings, 33–8.
Wade, J. and Colton, J.S. (1990) The development of a design for manufacture expert system, Proceedings of Manufacturing International ′90. Part 2: Advances in Manufacturing Systems, Atlanta, GA, March, 25–28,
Wade, J. and Colton, J.S. (1990) The development of a design for manufacture expert system, Proceedings of Manufacturing International ′90. Part 2: Advances in Manufacturing Systems, Atlanta, GA, March, 69–75.
Weston, R.H., Hodgson, A., Coutts, I.A. and Murgatroyd, I.S. (1991) Journal of Design and Manufacturing, 1, 47–56.
Whitney, D.E. (1990) Research in Engineering Design, 2, 3–13.
Whitney, D.E., De Fazio, T.L., Gustavson, R.E., Graves, S.C., Amblard, G.P., Abell, T.E., Baldwin, D.F., Cooprider, C, Pappu, S. and Lui, M.-C. (1990) Proceedings of NSF Design and Manufacturing Systems Conference, 1 (of 2), Tempe, Arizona, January, 8–12
Whitney, D.E., De Fazio, T.L., Gustavson, R.E., Graves, S.C., Amblard, G.P., Abell, T.E., Baldwin, D.F., Cooprider, C, Pappu, S. and Lui, M.-C. (1990) Proceedings of NSF Design and Manufacturing Systems Conference, 1 (of 2), Tempe, Arizona, January, 17–26.
Wierda, L.S. (1988) Engineering Costs and Production Economics, 13, 189–98.
Wong, J.P., Parsaei, H.R., Imam, I.N. and Kamrani, A.K. (1991) An integrated cost estimating system for concurrent engineering environment, Proceedings of the 13th Annual Conference on Computers and Industrial Engineering, Orlando, FL, Mar. 11–13.
Yoshimura, M., Itani, K. and Hitomi, K. (1989) International Journal of Production Research, 27, (8), 1241–56.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Jo, H.H., Parsaei, H.R., Sullivan, W.G. (1993). Principles of concurrent engineering. In: Parsaei, H.R., Sullivan, W.G. (eds) Concurrent Engineering. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-3062-6_1
Download citation
DOI: https://doi.org/10.1007/978-1-4615-3062-6_1
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-6336-1
Online ISBN: 978-1-4615-3062-6
eBook Packages: Springer Book Archive