Abstract
The design process for integrated continuous-time (CT) filters brings together several disciplines including filter and network theory, analog circuit design, and circuit modeling. Consequently, the designer of such a filter must consider issues ranging from IC fabrication technology to filter architecture to circuit-level design. This chapter synopsizes fundamental topics pertaining to the physical realization of integrated CT filters. As in Chapter 2, the scope of all relevant topics is far too broad for a full treatment here. Accordingly, the presentation of topics in this chapter is focused on issues of particular importance to the design of precision video-frequency lowpass filters. For further study of integrated CT filters, see Refs. [1–3].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Y. P. Tsividis and J. O. Voorman, eds., Integrated Continuous-Time Filters: Principles,Design, and Applications. Piscataway, New Jersey- IEEE Press, 1993.
R. Schaumann, M. S. Ghausi, and K. R. Laker, Design of Analog Filters: Passive,Active RC, and Switched Capacitor. Englewood Cliffs, New Jersey: Prentice-Hall, 1990.
Y. P. Tsividis, “Integrated continuous-time filter design—an overview,” IEEE J. Solid-State Circuits, vol. 29, pp. 166–176, Mar. 1994.
S. D. Willingham and K. W. Martin, “BiCMOS components for video-rate continuous-time filters,” in IEEE ISCAS Proc., pp. 2691–2694, 1992.
V. Gopinathan, Y. P. Tsividis, K.-S. Tan, and R. K. Hester, “Design considerations for high-frequency continuous-time filters and implementation of an antialiasing filter for digital video,” IEEE J. Solid-State Circuits, vol. 25, pp. 1368–1378, Dec. 1990.
Y.-T. Wang and A. A. Abidi, “CMOS active filter design at very high frequencies,” IEEE J. Solid-State Circuits, vol. 25, pp. 1562–1574, Dec. 1990.
J. Silva-Martinez, M. S. J. Steyaert, and W. Sansen, “A 10.7-MHz 68-dB SNR CMOS continuous-time filter with on-chip automatic tuning,” IEEE J. Solid-State Circuits, vol. 27, pp. 1843–1853, Dec. 1992.
J. M. Khoury, “Design of a 15-MHz CMOS continuous-time filter with on-chip tuning,” IEEE J. Solid-State Circuits, vol. 26, pp. 1988–1997, Dec. 1991.
F. Krummenacher and N. Joehl, “A 4 MHz CMOS continuous-time filter with on-chip automatic tuning,” IEEE J. Solid-State Circuits, vol. 23, pp. 750–758, June 1988.
C. S. Park and R. Schaumann, “Design of a 4-MHz analog integrated CMOS transconductance-C bandpass filter,” IEEE J. Solid-State Circuits, vol. 23, pp. 987–996, Aug. 1988.
H. Khorramabadi and P. R. Gray, “High-frequency CMOS continuous-time filters,” IEEE J. Solid-State Circuits, vol. SC-19, pp. 939–948, Dec. 1984.
M. Banu and Y. P. Tsividis, “An elliptic continuous-time filter with on-chip automatic tuning,” IEEE J. Solid-State Circuits, vol. SC-20, pp. 1114–1121, Dec. 1985.
Y. P. Tsividis, M. Banu, and J. Khoury, “Continuous-time MOSFET-C filters in VLSI,” IEEE J. Solid-State Circuits, vol. SC-21, pp. 15–30, Feb. 1986.
J. M. Khoury and Y. P. Tsividis, “Analysis and compensation of high-frequency effects in integrated MOSFET-C continuous-time filters,” IEEE Trans. Circuits Syst., vol. CAS-34, pp. 862–875, Aug. 1987.
B. Nauta, “A CMOS transconductance-C filter technique for very high frequencies,” IEEE J. Solid-State Circuits, vol. 27, pp. 142–153, Feb. 1992.
W. M. Snelgrove and A. Shoval, “A balanced 0.9—pm CMOS transconductance-C filter tunable over the VHF range,” IEEE J. Solid-State Circuits, vol. 27, pp. 314–323, Mar. 1992.
R. Gregorian and G. C. Temes, Analog MOS Integrated Circuits for Signal Processing. New York: Wiley, 1986.
J. B. Hughes, “Switched-current filters,” in Analogue IC Design: The Current-Mode Approach (C. Toumazou, E J. Lidgey, and D. G. Haigh, eds.), ch. 11, pp. 415–450, London: Peter Peregrinus, 1990.
E. Seevinck and R. E Wassenaar, “A versatile CMOS linear transconductor/square-law function circuit,”IEEE J. Solid-State Circuits, vol. SC-22, pp. 366–377, June 1987.
J. Silva-Martinez, M. S. J. Steyaert, and W. M. C. Sansen, “A large-signal very low-distortion transconductor for high-frequency continuous-time filters,” IEEE J. Solid-State Circuits, vol. 26, pp. 946–955, July 1991.
A. Nedungadi and T. R. Viswanathan, “Design of linear transconductance elements,” IEEE Trans. Circuits Syst., vol. CAS-31, pp. 891–894, Oct. 1984.
R. R. Torrance, T. R. Viswanathan, and J V. Hanson, “CMOS voltage to current transducers,” IEEE Trans. Circuits Syst., vol. CAS-32, pp. 1097–1104, Nov. 1985.
Y. P. Tsividis, Z. Czarnul, and S. C. Fang, “MOS transconductors and integrators with high linearity,” Electron. Lett., vol. 22, pp. 245–246, 1986.
T. L. Viswanathan, “CMOS transconductance element,” Proceedings of the IEEE, vol. 74, pp. 222–224, Jan. 1986.
K. Bult and H. Wallinga, “A class of analog CMOS circuits based on the square law characteristic of an MOS transistor in saturation,” IEEE J. Solid-State Circuits, vol. SC-22, pp. 357–365, June 1987.
S. T. Dupuie and M. Ismail, “High frequency CMOS transconductors,” in Analogue IC Design: The Current-Mode Approach (C. Toumazou, R J. Lidgey, and D. G. Haigh, eds.), ch. 5, pp. 181–238, London: Peter Peregrinus, 1990.
G. A. De Veirman and R. G. Yamasaki, “Design of a bipolar 10-MHz programmable continuous-time 0.05° equiripple linear phase filter,” IEEE J. Solid-State Circuits, vol. 27, pp. 324–331, Mar. 1992.
K. W. Moulding and G. A. Wilson, “A fully integrated five gyrator filter at video frequencies,” IEEE J. Solid-State Circuits, vol. SC-13, pp. 303–307, June 1978.
K. W. Moulding et al., “Gyrator video filter IC with automatic tuning,” IEEE J. Solid-State Circuits, vol. SC-15, pp. 963–968, Dec. 1980.
C. E Choiu and R. Schaumann, “Design and performance of a fully integrated bipolar 10.7 MHz analog bandpass filter,” IEEE J. Solid-State Circuits, vol. SC-21, pp. 6–14, Feb. 1986.
M. Koyama, H. Tanimoto, and S. Mizoguchi, “A 10.7 MHz continuous-time bandpass filter bipolar IC,” in IEEE Custom Integrated Circuits Conference, pp. 25.2.1–25.2.4, 1989.
W. de Heij, E. Seevinck, and K. Hoen, “Transconductor and integrator circuits for integrated bipolar video frequency filters,” in IEEE ISCAS Proc., pp. 114–117, 1989.
G. A. De Veirman and R. G. Yamasaki, “A 27 MHz programmable bipolar 0.05° equiripple linear-phase lowpass filter,” in ISSCC Dig. Tech. Papers, pp. 64–65, 1992.
A. R. Alvarez, “Introduction to BiCMOS,” in BiCMOS Technology and Applications (A. R. Alvarez, ed.), ch. 1, pp. 1–20, Dordrecht, The Netherlands: Kluwer, 1989.
A. S. Sedra and P. O. Brackett, Filter Theory and Design: Active and Passive. Beaverton, OR: Matrix, 1978.
S. J. Mason, “Feedback theory—some properties of signal flow graphs,” Proc. IRE, vol. 41, pp. 1144–1156, Sept. 1953.
S. J. Mason, “Feedback theory—further properties of signal flow graphs,” Proc. IRE, vol. 44, pp. 920–926, July 1956.
A. S. Sedra and K. C. Smith, Microelectronic Circuits. New York: Holt, Rinehart and Winston, 2nd ed., 1987.
W. J. Kerwin, L. P. Huelsman, and R. W Newcomb, “State-variable synthesis for insensitive integrated-circuit transfer functions,” IEEE J. Solid-State Circuits, vol. SC-2, pp. 87–92, Jan. 1967.
J. Tow, `Active RC filters—a state-space realization,“ Proc. IEEE, vol. 56, pp. 1137–1139, 1968.
L. C. Thomas, “The biquad: Part I—some practical design considerations,” IEEE Trans. Circuit Theory, vol. CT-18, pp. 350–357, May 1971.
L. C. Thomas, “The biquad: Part II—a multipurpose active filtering system,” IEEE Trans. Circuit Theory, vol. CT-18, pp. 358–361, May 1971.
H. J. Orchard, “Inductorless filters,” Electron. Lett., vol. 2, pp. 224–225, Sept. 1966.
H. J. Orchard and D. F. Sheahan, “Inductorless bandpass filters,” IEEE J. Solid-State Circuits, vol. SC-5, pp. 108–118, June 1970.
G. C. Temes and H. J. Orchard, “First-order sensitivity and worst-case analysis of doubly terminated reactance two-ports,” IEEE Trans. Circuit Theory, vol. CT-20, pp. 567–571,1973.
H. J. Orchard, “Loss sensitivity in singly and doubly terminated filters,” IEEE Trans. Circuits Syst., vol. CAS-26, pp. 293–297, 1979.
H. J. Orchard, G. C. Temes, and T. Cataltepe, “Sensitivity formulas for terminated lossless two-ports,” IEEE Trans. Circuits Syst., vol. CAS-32, pp. 459–466, May 1985.
L. T. Bruton, “Frequency selectivity using positive impedance converter-type networks,” Proc. IEEE,vol. 56, pp. 1378–1379, Aug. 1968.
L. T. Bruton, “Network transfer functions using the concept of frequency dependent negative resistance,” IEEE Trans. Circuit Theory, vol. CT-16, pp. 406–408, Aug. 1969.
J. Gorski-Popeil, “RC-active synthesis using positive-immittance converters,” Electron. Lett., vol. 3, pp. 381–382, Aug. 1967.
G. C. Temes and S. K. Mitra, eds., Modern Filter Theory and Design. New York: Wiley, 1973.
G. C. Temes and J. W. LaPatra, Circuit Synthesis and Design. New York: McGraw-Hill, 1977.
B. D. H. Tellegen, “The gyrator, a new electric network element,” Philips Res. Rept., vol. 3, no. 2, pp. 81–101,1948.
B. D. H. Tellegen, “The gyrator, an electric network element,”Philips Technical Review, vol. 18, no. 4/5, pp. 120–124, 1956/57.
H. J. Orchard, “Gyrator circuits,” in Active Filters: Lumped, Distributed,Integrated, Digital and Parametric (L. P. Huelsman, ed.), ch. 3, pp. 90–127, New York: McGraw-Hill, 1970.
H. M. Paynter, ed., A Palimpsest on the Electronic Analog Art. Boston, MA: Geo. A. Philbrick Researches, Inc., 1955.
O. Wing, “Ladder network analysis by signal-flow graph—application to analog computer programming,” IRE Trans. Circuit Theory, vol. CT-3, pp. 289–294, Dec. 1956.
F. E. J. Girling and E. F. Good, “The leapfrog or active-ladder synthesis,” Wireless World, pp. 341–345, July 1970. This is part 12 of a 16-part series running from August 1969 to December 1970.
K. Martin and A. S. Sedra, “Design of signal-flow graph (SFG) active filters,” IEEE Trans. Circuits Syst., vol. CAS-25, pp. 185–195, Apr. 1978.
N. Balabanian and T. A. Bickart, Linear Network Theory. Chesterland, OH: Matrix, 1981.
D. A. Johns, W. M. Snelgrove, and A. S. Sedra, “Orthonormal ladder filters,” IEEE Trans. Circuits Syst., vol. 36, pp. 337–343, Mar. 1989.
S. Darlington, “Synthesis of reactance 4-poles which produce prescribed insertion loss characteristics,” J. Mathematics and Physics, vol. 18, pp. 257–353, Sept. 1939.
J. Silva-Martinez, M. S. J. Steyaert, and W. M. C. Sansen, “A novel approach for the automatic tuning of continuous time filters,” in IEEE ISCAS Proc., pp. 1452–1455, 1991.
R. Schaumann and M. A. Tan, “The problem of on-chip automatic tuning in continuous-time integrated filters,” in IEEE ISCAS Proc., pp. 106–109, 1989.
P. M. VanPeteghem and R. Song, “Tuning strategies in high-frequency integrated continuous-time filters,” IEEE Trans. Circuits Syst., vol. 36, pp. 136–139, Jan. 1989.
P. M. VanPeteghem and T. L. Brooks, “Simultaneous tuning and signal processing in integrated continuous-time filters: The correlated tuning loop,” in IEEE IS CAS Proc., pp. 651–654, 1989.
C.-G. Yu, W G. Bliss, and R. L. Geiger, “A tuning algorithm for digitally programmable continuous-time filters,” in IEEE ISCAS Proc., pp. 1436–1439, 1991.
R. K. Jurgen, “Good-bye to TV ghosts,” IEEE Spectrum, pp. 50–52, July 1992.
F. M. Gardner, Phaselock Techniques. New York: John Wiley and Sons, 1979.
P. R. Gray and R. G. Meyer, Analysis and Design of Analog Integrated Circuits. New York: Wiley, 2nd ed., 1984.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media New York
About this chapter
Cite this chapter
Willingham, S.D., Martin, K. (1995). Realization of Integrated Continuous-Time Filters. In: Integrated Video-Frequency Continuous-Time Filters. The Springer International Series in Engineering and Computer Science, vol 323. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-2347-5_3
Download citation
DOI: https://doi.org/10.1007/978-1-4615-2347-5_3
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-5995-1
Online ISBN: 978-1-4615-2347-5
eBook Packages: Springer Book Archive