Abstract
In this chapter, we discuss in some detail the important subject of thermal stresses in composites. This is of importance in all composites, PMCs, MMCs, and CMCs. The analytical expressions obtained in Sec. 8.2 and 8.3 have, of course, general validity for a variety of composites. We shall then apply the results obtained in these sections to CMCs and derive some important guidelines to obtain enhanced fracture toughness in these materials. Finally, we dwell on the subject of thermal shock and thermal fatigue in CMCs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Arsenault R.J. and R.M. Fisher(1983) Scripta Met., 17, 67.
Barrera, E.V. and I. Dutta (1993) Residual Stresses in Composites, The Mineral, Metal and Materials Society, Warrendale, PA.
Bhatt, R.T. (1992) J. Amer. Ceram. Soc., 75, 406.
Bhatt, R.T. and R.E. Phillips (1990) J. Materials Science, 25, 340.
Bhatt, R.T. and A. R. Palczer (1997) J. Materials Science, 32,103.
Blissett, M.J., P.A. smith, and J.A. Yeomans (1997) J. Materials Science, 32, 317.
Boccaccini, A.R. and K. Pfeiffer (1999)Glass sci. Technol Glastech Ber. 72, 32.
Boccaccini, A.R., C.B. Ponton, and K.K. Chawla (1997b) Mat. Sci. Eng. A, 241A, 142.
Boccaccini, A.R., D.H. Pearce, J. Janczak, W. Beier, and C.B. Ponton (1997a) Mater. Sci Technology, 13, 852.
Bouchetou, M. L., M. Huger, and C. Gault (1993) J. de Physique III, 3, 1883.
Brooksbank, D. and K.W Andrews (1970) J. Iron and Steel Inst., 208, 582.
Brun, M.J. and R.N. Singh (1988) Adv. Ceram. Mater., 3, 505.
Cai, P.Z., D.J. Green, G.L. Messing (1997) J. Amer. Ceram. Soc., 80, 1929.
Case, E. D., Y. Kim, and W. J. Lee (1993) in Thermal Shock Behavior and Thermal Fatigue of Advanced Ceramics, G. A. Schneider and G. Petzow (eds.), Kluwer Academic Publishers, Dordrecht, the Netherlands, p. 393.
Chawla, K.K. (1973a) Phil. Mag., 28, 401.
Chawla, K.K. (1973b) Metallography, 6, 55.
Chawla, K.K. (1998) Composite Materials: Science & Engineering, 2nd edition, Springer-Verlag, New York, p. 328.
Chawla, K.K. and M. Metzger (1972) J. Mater. Sci., 7, 34.
Chawla, N., K.K. Chawla, M. Koopman, B. Patel, C.C. Coffin, and J.I. Eldridge, (2001) Comp. Sci. Tech., 61, 1923.
Christman, T. and S. Suresh (1988) Acta Met., 36, 1691.
DiGregrio, J.F., T.E. Furtak, and J.J. Petrovic (1992) J. Appl. Phys., 71, 3524.
Eckel, A.J., J.Z. Guekenyesi, T.P. Herbell, and E.R. Generazio (1991) NASA Tech. Memo. 103777
Evans, A.G. and D.B. Marshall (1989) Acta Met., 37, 2567.
Feldman, L.A. (1986) J. Mater. Sci. Letter, 5, 1266.
G. M. Gladysz and K.K. Chawla (2001) Composites A, 32 173.
Herrmann, K.P. and Y.Q. Wang (1991) in Inelastic Deformation of Composite Materials, Springer-Verlag, New York, p. 445.
Hsueh, C.S., P.F. Becher, and P. Angelini (1988) J. Amer. Ceram. Soc., 71, 929.
Hull, A.W. and E.E. Burger (1934) Physics, 5, 384.
Hutchinson, J.W. and H.M. Jensen (1990) Mech. Mater., 9, 139.
Jurewicz, A.J.G., R.J. Kerans, and J. Wright (1989) Ceram. Eng. Sci. Proc., 10, 925.
Kim, Y., W.J. Lee, and E.D. Case (1990) in Metal and Ceramic Matrix Composites, R. B. Bhagat, A. H. Clauer, P. Kumar and A. M. Ritter (eds.), The Minerals, Metals, and Materials Society, Warrendale, PA, p. 479.
Kagawa, Y., N. Kurosawa, and T. Kishi (1993) J. Mater. Sci., 28,735.
Lamicq, P.J., G.A. Bernhart, M.M. Dauchier, and J.G. Macem (1986) Bull. of Amer. Ceram. Soc., 65, 336.
Lee, W. J. and E.D. Case (1989) Material Science and Eng. A119, 113.
Majumdar, S., M.A. Bertinetti, and S.R. MacEwen (1988a) J. Am. Ceram. Soc., 73, 858.
Majumdar, S., D. Kupperman, and J. Singh, (1988b) J. Amer. Ceram. Soc., 71 858.
Noyan, I.C. and J.B. Cohen (1987) Residual Stress, Springer-Verlag, New York. Poritsky, H. (1934) Physics, 5, 406.
Predecki, P., A. Abuhasan, and C.S. Barrett (1988) Advances in X-Ray Analysis 31, 231.
Scherer, G. (1986) Relaxation in Glass & Composites, John Wiley, New York.
Sinha, A., K. Kokini, and K.J. Bowman (1994) Material Science and Engineering, A188, 317.
Tiegs, T.N. and P.F. Becher (1987) J. Amer. Ceram. Soc., 70, C109.
Timoshenko S. and J.N. Goodier (1951) Theory of Elasticity, McGraw-Hill, New York, 1951, p. 416.
Fitzer, E. and P. Schubert(1979) Rev. Int. Hautes Temperatures Refractaires, 16,147.
Wang, H.V. and R.N. Singh (1994) Int. Mater. Review, 39, 228.
Wang, H.V., R.N. Singh, and R.A. Lowden (1996) J. Amer. Ceram. Soc., 79, 1783.
Wang, Y.R. and T.-W. Chou (1991) J. Mater. Sci., 26, 2961.
Webb, J.E., R.N. Singh, and R.A Lowden (1996) J. Amer. Ceram. Soc., 79, 2857.
Wetherhold, R.C. and L.P Zawada (1991) in Fractography of Glasses & Ceramics, V.D. Frechete and J.R. Varner (eds.), Ceramic Transactions, vol. 17, Amer. Ceram. Soc, Westerville, OH, p. 391.
Suggested Reading
Noyan, I.C. and J.B Cohen (1987) Residual Stress, Springer-Verlag, New York.
Schneider, G.A. and G. Petzow (eds.) (1993) Thermal Shock Behavior and Thermal Fatigue of Advanced Ceramics, Kluwer Acad. Pub., Dordrecht, The Netherlands.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer Science+Business Media New York
About this chapter
Cite this chapter
Chawla, K.K. (2003). Thermal Stresses. In: Ceramic Matrix Composites. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-1029-1_8
Download citation
DOI: https://doi.org/10.1007/978-1-4615-1029-1_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-7262-8
Online ISBN: 978-1-4615-1029-1
eBook Packages: Springer Book Archive