Abstract
Safety and reliability are increasingly important for modern complex engineering systems. However, no matter how good the system design is, system components deteriorate over time due to certain stress or load in operation. As a consequence, sophisticated and advanced techniques to detect and isolate faults in the monitored system become urgent needs in industry. This chapter aims to introduce the basic tasks of fault diagnosis and failure prognosis as well as their classifications. In the following of this chapter, recent developments in the field of fault diagnosis and prognosis are discussed, followed by the organization of the book.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, Intelligent prognostics tools and e-maintenance. Comput. Ind. 57(6), 476–489 (2006)
J.H. Luo, M. Namburu, K.R. Pattipati, L. Qiao, S. Chigusa, Integrated model-based and data-driven diagnosis of automotive antilock braking systems. IEEE Trans. Syst. Man Cybern. A Syst. Hum. 40(2), 321–336 (2010)
A.K. Samantaray, B. Ould Bouamama, Model-Based Process Supervision: A Bond Graph Approach (Springer, London, 2008)
S.X. Ding, Model-Based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools (Springer, Berlin, 2008)
C. Ghiaus, Fault diagnosis of air conditioning systems based on qualitative bond graph. Energy Build. 30(3), 221–232 (1999)
B. Kuipers, Qualitative simulation. Artif. Intell. 29(3), 289–338 (1986)
B. Kuipers, Qualitative simulation as causal explanation. IEEE Trans. Syst. Man Cybern. 17(3), 432–445 (1987)
H.T. Ng, Model-based multiple fault diagnosis of time-varying, continuous physical devices. In the Sixth Conference on Artificial Intelligence Applications, vol. 1, May 1990, pp. 9–15
S. Subramanian, R. J. Mooney, Qualitative multiple-fault diagnosis of continuous dynamic systems using behavioral modes. In the 13th National Conference on, Artificial Intelligence, August 1996, pp. 965–970
Q. Shen, R.R. Leitch. Qualitative model based of continuous dynamic systems. In Proceedings of the First International Conference on Intelligent Systems Engineering, Heriot-Watt University, Edinburgh, 1992, pp. 147–152
E.E. Hurdle, L.M. Bartlett, J.D. Andrews, System fault diagnostics using fault tree analysis. J. Risk Reliab., Part O (Proc. IMechE) 221(1), 43–55 (2007)
M.G.M. Madden, P.J. Nolan, Monitoring and diagnosis of multiple incipient faults using fault tree induction. IEE Proc.-Control Theory Appl. 146(2), 204–212 (1999)
V. Venkatasubramanian, R. Rengaswamy, K. Yin, S.N. Kavuri, A review of process fault detection and diagnosis: part I: quantitative model-based methods. Comput. Chem. Eng. 27(3), 293–311 (2003)
S. Xia, D.A. Linkens, S. Bennette, Automatic modeling and analysis of dynamical physical systems using qualitative reasioning and bond graphs. Intell. Syst. Eng. 2(4), 201–212 (1993)
D. A. Linkens, H. Wang, Fault diagnosis based on a qualitative bond graph model, with emphasis on fault localization. In IEE Colloquium on Qualitative and Quantitative Modeling Methods for Fault Diagnosis, pp. 1–6, 1995
C.H. Lo, Y.K. Wong, A.B. Rad, Model-based fault diagnosis in continuous dynamic systems. ISA Trans. 43(3), 459–475 (2004)
C.H. Lo, Y.K. Wong, A.B. Rad, Intelligent system for process supervision and fault diagnosis in dynamic physical systems. IEEE Trans. Ind. Electron. 53(2), 581–592 (2006)
C.H. Lo, Y.K. Wong, A.B. Rad, Fusion of qualitative bond graph and genetic algorithms: a fault diagnosis application. ISA Trans. 41(4), 445–456 (2002)
J. Chen, R. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems (Kluwer Academic Publishers, Boston, 1999)
S. Ehsan, K. Khashayar, Fault Diagnosis of Nonlinear Systems Using a Hybrid Approach (Springer, New York, 2009)
H. Hammouri, M. Kinnaert, E.H. El Yaagoubi, Observer-based approach to fault detection and isolation for nonlinear systems. IEEE Trans. Autom. Control 44(10), 1879–1884 (1999)
X. Ding, P.M. Frank, An adaptive observer-based fault detection scheme for nonlinear systems. In Proceedings of the 12th IFAC World Congress, Sydney, Australia, pp. 63–68, 1993
C. Edwards, S.K. Spurgeon, R.J. Patton, Sliding mode observers for fault detection and isolation. Automatica 36(4), 541–553 (2000)
C.P. Tan, C. Edwards, Robust fault reconstruction in uncertain linear systems using multiple sliding mode observers in cascade. IEEE Trans. Autom. Control 55(4), 855–867 (2010)
C.P. Tan, C. Edwards, Sliding mode observers for robust detection and reconstruction of actuator and sensor faults. Int. J. Robust Nonlinear Control 13(5), 443–463 (2003)
K.Y. Ng, C.P. Tan, C. Edwards, Y.C. Kuang, New results in robust actuator fault reconstruction in linear uncertain systems using sliding mode observers. Int. J. Robust Nonlinear Control 17(14), 1294–1319 (2007)
J.H. Lee, J. Lyou, Fault diagnosis and fault tolerant control of linear stochastic systems with unknown inputs. Syst. Sci. 27(3), 59–76 (2001)
J. Sanjay, A new fast converging Kalman filter for sensor fault detection and isolation. Sens. Rev. 30(3), 219–224 (2010)
N. Tudoroiu, K. Khorasani, Satellite fault diagnosis using a bank of interacting Kalman filters. IEEE Trans. Aerosp. Electron. Syst. 43(4), 1334–1350 (2007)
A. Alessandri, M. Caccia, G. Veruggio, Fault detection of actuator faults in unmanned underwater vehicles. Control Eng. Pract. 7(3), 357–368 (1999)
M. Staroswiecki, G. Comtet-Varga, Analytical redundancy relations for fault detection and isolation in algebraic dynamic systems. Automatica 37(5), 687–699 (2001)
S.K. Nguang, P. Zhang, S. Ding, Parity based fault estimation for nonlinear systems: An LMI approach. In Proceedings of American Control Conference, Minneapolis, USA, 2006, pp. 5141–5146
M.A. Djeziri, R. Merzouki, B. Ould Bouamama, Robust monitoring of an electric vehicle with structured and unstructured uncertainties. IEEE Trans. Veh. Technol. 58(9), 4710–4719 (2009)
M.A. Djeziri, R. Merzouki, B. Ould-Bouamama, G. Dauphin-Tanguy, Robust fault diagnosis by using bond graph approach. IEEE/ASME Trans. Mechatron. 12(6), 599–611 (2007)
C.B. Low, D. Wang, S. Arogeti, M. Luo, Quantitative hybrid bond graph-based fault detection and isolation. IEEE Trans. Autom. Sci. Eng. 7(3), 558–569 (2010)
C.B. Low, D. Wang, S. Arogeti, J.B. Zhang, Causality assignment and model approximation for hybrid bond graph: fault diagnosis perspectives. IEEE Trans. Autom. Sci. Eng. 7(3), 570–580 (2010)
S. Arogeti, D. Wang, C. B. Low, D. H. Zhang, J. Zhou. Mode tracking of hybrid systems in FDI framework. In the 3rd International Conference on Robotics Automation and, Mechatronics (RAM2008), 2008, pp. 841–846
S. Arogeti, D. Wang, C.B. Low. Mode tracking and FDI of hybrid systems. In the 10th International Conference on Control, Automation, 2008, pp. 112–118
C.B. Low, D. Wang, S. Arogeti, M. Luo. Fault parameter estimation for hybrid systems using hybrid bond graph. In the 3rd IEEE Multi-conference on Systems and Control (MSC 2009), 2009, pp. 1338–1343
R. Isermann, Fault diagnosis via parameter estimation and knowledge processing. Automatica 29(4), 815–835 (1994)
I. Hwang, S. Kim, Y. Kim, C.E. Seah, A survey of fault detection, isolation, and reconfiguration methods. IEEE Trans. Control Syst. Technol. 18(3), 636–653 (2010)
J. Chen, R. Pattern, H. Zhang, Design of unknown input observers and robust fault detection filters. Int. J. Control 63(1), 85–105 (1996)
S.F. Lin, A.P. Wang, Design of observers with unknown inputs using eignstructure assignment. Int. J. Syst. Sci. 31(6), 705–711 (2000)
D.T. Horak, Failure detection in dynamic systems with modelling errors. J. Guidance Conrol Dyn. 131(6), 508–516 (1998)
Z. Shi, F. Gu, B. Lennox, A.D. Ball, The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Eng. Pract. 13(11), 1357–1367 (2005)
V. Venkatasubramanian, R. Rengaswamy, S.N. Kavuri, K. Yin, A review of process fault detection and diagnosis Part III: process history based methods. Comput. Chem. Eng. 27(3), 327–346 (2003)
A.K.S. Jardine, D. Lin, D. Banjevic, A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech. Syst. Signal Process. 20(7), 1483–1510 (2006)
M.C. Pan, P. Sas, H. Van Brussel, Machine condition monitoring using signal classification techniques. J. Vib. Control 9(10), 1103–1120 (2003)
X. Lou, K.A. Loparo, Bearing fault diagnosis based on wavelet transform and fuzzy inference. Mech. Syst. Signal Process. 18(5), 1077–1095 (2004)
B.M. Ebrahimi, J. Faiz, Feature extraction for short-circuit fault detection in permanent-magnet synchronous motors using stator-current monitoring. IEEE Trans. Power Electron. 25(10), 2673–2682 (2010)
Q. Wu, Fault diagnosis model based on Gaussian support vector classifier machine. Expert Syst. Appl. 37(9), 6251–6256 (2010)
J.I. Park, S.H. Baek, M.K. Jeong, S.J. Bae, Dual features functional support vector machines for fault detection of rechargeable batteries. IEEE Trans. Syst. Man Cybern. Part C Appl. Rev. 39(4), 480–485 (2009)
Y. Yao, F.R. Gao, Statistical monitoring and fault diagnosis of batch processes using two-dimensional dynamic information. Ind. Eng. Chem. Res. 49(20), 9961–9969 (2010)
Q.P. He, J. Wang, Large-scale semiconductor process fault detection using a fast pattern recognition-based method. IEEE Trans. Semicond. Manuf. 23(2), 194–200 (2010)
B. Li, M.Y. Chow, Y. Tipsuwan, J.C. Hung, Neural-network-based motor rolling bearing fault diagnosis. IEEE Trans. Ind. Electron. 47(5), 1060–1069 (2000)
Y. Fan, C.J. Li, Diagnostic rule extraction from trained feedforward neural networks. Mech. Syst. Signal Process. 16(6), 1073–1081 (2002)
J.K. Spoerre, Application of the cascade correlation algorithm (CCA) to bearing fault classification problems. Comput. Ind. 32(3), 295–304 (1997)
C.C. Wang, G.P.J. Too, Rotating machine fault detection based on HOS and artificial neural networks. J. Intell. Manuf. 13(4), 283–293 (2002)
R.M. Tallam, T.G. Habetler, R.G. Harley, Self-commissioning training algorithms for neural networks with applications to electric machine fault diagnostics. IEEE Trans. Power Electron. 17(6), 1089–1095 (2002)
M. Stanek, M. Morari, K. Frohlich, Model-aided diagnosis: An inexpensive combination of model-based and case-based condition assessment. IEEE Trans. Syst. Man Cybern. Part C Appl. Rev. 31(2), 137–145 (2001)
B.S. Yang, T. Han, Y.S. Kim, Integration of ART-Kohonen neural network and case-based reasoning for intelligent fault diagnosis. Expert Syst. Appl. 26(3), 387–395 (2004)
S. Sampath, S. Ogaji, R. Singh, D. Probert, Engine-fault diagnostics: an optimisation procedure. Appl. Energy 73(1), 47–70 (2002)
B. Samanta, C. Nataraj, Use of particle swarm optimization for machinery fault detection. Eng. Appl. Artif. Intell. 22(2), 308–316 (2009)
Q. Wu, Car assembly line fault diagnosis based on robust wavelet SVC and PSO. Expert Syst. Appl. 37(7), 5423–5429 (2010)
G. Vachtsevanos, F. Lewis, M. Roemer, A. Hess, B. Wu, Intelligent Fault Diagnosis and Prognosis for Engineering Systems (John Wiley & Sons Inc., New Jersey, 2006)
A. Heng, S. Zhang, A.C.C. Tan, J. Mathew, Rotating machinery prognostics: state of the art, challenges and opportunities. Mech. Syst. Signal Process. 23(3), 724–739 (2009)
V. Venkatasubramanian, Prognostic and diagnostic monitoring of complex systems for product lifecycle management: challenges and opportunities. Comput. Chem. Eng. 29(6), 1253–1263 (2005)
M. Luo, D. Wang, M. Pham. Model-based fault diagnosis/prognosis for wheeled mobile robots: a review. In the 31st Annual Conference of IEEE, 2005, pp. 2267–2272
A. Schomig, O. Rose, On the suitability of the Weibull distribution for the approximation of machine failures. In Proceedings of the Industrial Engineering Research Conference, Portland, USA, 2003
P.G. Groer, Analysis of time-to-failure with a Weibull model. In Proceedings of the Maintenance and Reliability Conference, Knoxville, USA, 2000, pp. 5901–5904
W. Li, Evaluating mean life of power system equipment with limited end-of-life failure data. IEEE Trans. Power Syst. 19(1), 236–242 (2004)
Y. Li, T.R. Kurfess, S.Y. Liang, Stochastic prognostics for rolling element bearings. Mech. Syst. Signal Process. 14(5), 747–762 (2000)
A. Ray, S. Tangirala, Stochastic modeling of fatigue crack dynamics for on-line failure prognostics. IEEE Trans. Control Syst. Technol. 4(4), 443–451 (1996)
D.E. Adams, M. Nataraju, A nonlinear dynamical systems framework for structural diagnosis and prognosis. Int. J. Eng. Sci. 40(17), 1919–1941 (2002)
D. Chelidze, J.P. Cusumano, A. Chatterjee, Dynamical systems approach to damage evolution tracking-Part I: The experimental method. J. Vibr. Acoust. Trans. ASME 124(2), 250–257 (2002)
J. Qiu, B.B. Set, S.Y. Liang, C. Zhang, Damage mechanics approach for bearing lifetime prognostics. Mech. Syst. Signal Process. 16(5), 817–829 (2002)
J.H. Luo, K.R. Pattipati, L. Qiao, S. Chigusa, Model-based prognostic techniques applied to a suspension system. IEEE Trans. Syst. Man Cybern. Part A Syst. Hum. 38(5), 1156–1168 (2008)
J.D. Kozlowski, C.S. Byington, A.K. Garga, M.J. Watson, T.A. Hay, Model-based predictive diagnostics for electrochemical energy sources. In Proceedings of the IEEE Aerospace Conference, vol. 6, 2001, pp. 3149–3164
J.H. Aylor, A. Thieme, B.W. Johnson, A battery state-ofcharge indicator for electric wheelchairs. IEEE Trans. Ind. Electron. 39(5), 398–409 (1992)
O. Caumont, P.L. Moigne, C. Rombaut, X. Muneret, P. Lenain, Energy gauge for lead-acid batteries in electric vehicles. IEEE Trans. Energy Convers. 15(3), 354–360 (2000)
C.J. Li, S. Choi, Spur gear root fatigue crack prognosis via crack diagnosis and fracture mechanics. In Proceedings of the 56th Meeting of the Society of Mechanical Failures Prevention Technology, Virginia Beach, 2002, pp. 311–320
C.J. Li, H. Lee, Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics. Mech.l Syst. Signal Process. 19(3), 836–846 (2005)
R.F. Orsagh, J. Sheldon, C.J. Klenke, Prognostics/diagnostics for gas turbine engine bearings. In Proceedings of the IEEE Aerospace Conference, vol. 7, pp. 3095–3103
G.J. Kacprzynski, A. Sarlashkar, M.J. Roemer, A. Hess, B. Hardman, Predicting remaining life by fusing the physics of failure modeling with diagnostics. JOM J. Miner. Met. Mater. Soc. 56(2), 29–35 (2004)
B. Zhang, C. Sconyers, R. Patrick, G. Vachtsevanos, A multi-fault modeling approach for fault diagnosis and failure prognosis of engineering systems. InAnnual Conference of the Prognostics and Health Management Society, 2009
C. Cempel, H.G. Natke, M. Tabaszewski, A passive diagnostic experiment with ergodic properties. Mechan. Syst. Signal Process. 11(1), 107–117 (1997)
G.A. Lesieutre, L. Fang, U. Lee, Hierarchical failure simulation for machinery prognostics. In Joint Conference of the 51st Meeting of the SMFPT / 12th Biennial Conference on Reliability, Stress Analysis and Failure Prevention (RSAFP Committe of ASME), 1997, pp. 103–110
S.J. Engel, B.J. Gilmartin, K. Bongort, A. Hess, Prognostics, the real issues involved with predicting life remaining. In Proceedings of IEEE Aerospace Conference, vol. 6, 2000, pp. 457–469
X.S. Si, W.B. Wang, C.H. Hua, D.H. Zhou, Remaining useful life estimation–a review on the statistical data driven approaches. Eur. J. Oper. Res. 213(1), 1–14 (2011)
W. Batko. Prediction Method in Technical Diagnostics. PhD Thesis, Cracov Mining Academy, 1984
K. Kazmierczak. Application of autoregressive prognostic techniques in diagnostics. In Proceedings of the Vehicle Diagnostics Conference, 1983, pp. 128–134
W. Wang, F. Golnaraghi, F. Ismail, Prognosis of machine health condition using neuro-fuzzy systems. Mech. Syst. Signal Process. 18(4), 813–831 (2004)
W. Wang, An adaptive predictor for dynamic system forecasting. Mech. Syst. Signal Process. 21(2), 809–823 (2007)
N. Gebraeel, M. Lawley, R. Liu, V. Parmeshwaran, Residual life predictions from vibration-based degradation signals: a neural network approach. IEEE Trans. Ind. Electron. 51(3), 694–700 (2004)
P. Wang, G. Vachtsevanos, Fault prognostics using dynamic wavelet neural networks. Artif. Intell. Eng. Des. Anal. Manuf. 15(4), 349–365 (2001)
N. Gebraeel, M. Lawley, A neural network degradation model for computing and updating residual life distributions. IEEE Trans. Autom. Sci. Eng. 5(1), 154–163 (2008)
J.W. Sheppard, M.A. Kaufman, Bayesian diagnosis and prognosis using instrument uncertainty. In Proceedings of, AUTOTESTCON, 2005, pp. 417–423
C. Bunks, D. McCarthy, T. Al-Ani, Condition-based maintenance of machines using hidden Markov models. Mech. Syst. Signal Process. 14(4), 597–612 (2000)
P. Baruah, R.B. Chinnam, HMMs for diagnostics and prognostics in machining processes. Int. J. Prod. Res. 43(6), 1275–1293 (2005)
M. Orchard, G. Vachtsevanos, A particle filtering approach for on-line fault diagnosis and failure prognosis. Trans. Inst. Meas. Control 31(3), 221–246 (2009)
X.D. Zhang, R. Xu, K. Chiman, S.Y. Liang, Q.L. Xie, L. Haynes, An integrated approach to bearing fault diagnostics and prognostics. In Proceedings of the American Control Conference, vol. 4, 2005, pp. 2750–2755
C. Kwan, X. Zhang, R. Xu, L. Haynes, A novel approach to fault diagnostics and prognostics. In Proceedings of the IEEE International Conference on Robotics and Automation, vol. 1, 2003, pp. 604–609
M.I. Mazhar, S. Kara, H. Kaebernick, Remaining life estimation of used components in consumer products: life cycle data analysis by Weibull and artificial neural networks. J. Oper. Manage. 25(6), 1184–1193 (2007)
K.B. Goode, J. Moore, B.J. Roylance, Plant machinery working life prediction method utilizing reliability and condition-monitoring data. In Proceedings of Institution of Mechanical Engineers, vol. 214, 2000, pp. 109–122
A. Heng, A. Tan, J. Mathew, B.S. Yang, Machine prognosis with full utilization of truncated lifetime data. In Proceedings of the Second World Congress on Engineering Asset Management, Harrogate, UK, 2007, pp. 775–784
W. Wang, A model to determine the optimal critical level and the monitoring intervals in condition-based maintenance. Int. J. Prod. Res. 38(6), 1425–1436 (2000)
L. Dieulle, C. Berenguer, A. Grall, M. Roussignol, Sequential condition-based maintenance scheduling for a deteriorating system. Eur. J. Oper. Res. 150(2), 451–461 (2003)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media New York
About this chapter
Cite this chapter
Wang, D., Yu, M., Low, C., Arogeti, S. (2013). Health Monitoring of Engineering Systems. In: Model-based Health Monitoring of Hybrid Systems. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-7369-5_1
Download citation
DOI: https://doi.org/10.1007/978-1-4614-7369-5_1
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-7368-8
Online ISBN: 978-1-4614-7369-5
eBook Packages: Computer ScienceComputer Science (R0)