Abstract
The application of experimental modal analysis methods to nonlinear structures (sometimes referred to as “nonlinear modal testing” – NLMT) is not a new field, but only in the past few years has it become mature enough to be approached in a systematic way. Many methods have been developed over the years for dealing with nonlinearities in structural dynamics, but nonlinearity is an extremely complex phenomenon with so many aspects and consequences that is not possible to have a single method capable to deal with all of them. Rather than taking a holistic approach, it is perhaps useful for the engineer to have a set of mathematical tools to analyse separate subsets of the whole problem, i.e. one being within the scope of each individual investigation. The main objective of this paper is to provide a modular framework from which the engineer can choose the most appropriate method to retrieve information about an examined nonlinearity, based on the type of information needed and the available data set. This is achieved by performing a breakdown of the nonlinear modal analysis process into four main stages: detection, localisation, characterisation and quantification – each of these providing a different level of insight into the problem. A review of currently-available algorithms applicable for these four categories is presented, as well as their application to two simple case studies.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Magnevall M (2011) Simulation and experimental methods for characterization of nonlinear mechanical systems. Blekinge Institute of Technology, Sweden
Carrella A, Ewins DJ (2011) Identifying and quantifying structural nonlinearities in engineering applications from measured frequency response functions. Mech Syst Signal Process 25(3):1011–1027
Peeters M, Kerschen G, Golinval JC (2011) Dynamic testing of nonlinear vibrating structures using nonlinear normal modes. J Sound Vib 330(3):486–509
Kerschen G, Lenaerts V, Golinval J-C (2003) Vtt benchmark: application of the restoring force surface method. Mech Syst Signal Process 17(1):189–193
Peng ZK, Lang ZQ, Billings SA (2007) Crack detection using nonlinear output frequency response functions. J Sound Vib 301(3–5):777–788
Feldman M (2011) Hilbert transform in vibration analysis. Mech Syst Signal Process 25(3):735–802
Huang TL, Ren WX, Lou ML (2011) Identification of MDOF non-linear uncoupled dynamical systems using Hilbert transform and empirical mode decomposition method. Adv Mater Res 255–260:1676–1680
Mohammad KS, Worden K, Tomlinson GR (1992) Direct parameter estimation for linear and non-linear structures. J Sound and Vib 152:471–499
Peeters M, Kerschen G, Golinval JC (2011) Modal testing of nonlinear vibrating structures based on nonlinear normal modes: experimental demonstration. Mech Syst Signal Process 25(4):1227–1247
Acknowledgements
The authors wish to acknowledge, with thanks, the sponsorship by AgustaWestland SpA of the research which has resulted in this paper, and specifically to recognise the support and collaboration of Attilio Colombo and Vincenzo Barraco.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 The Society for Experimental Mechanics
About this paper
Cite this paper
Carri, A.d., Ewins, D.J. (2014). A Systematic Approach to Modal Testing of Nonlinear Structures. In: Allemang, R., De Clerck, J., Niezrecki, C., Wicks, A. (eds) Topics in Modal Analysis, Volume 7. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-6585-0_25
Download citation
DOI: https://doi.org/10.1007/978-1-4614-6585-0_25
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-6584-3
Online ISBN: 978-1-4614-6585-0
eBook Packages: EngineeringEngineering (R0)