Advertisement

Intelligent Power Management System Based Impedance Identification Technology for Safety of Power Utilization

  • Wei Song
  • Ning Xie
  • Baoju Zhang
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 202)

Abstract

This chapter presents the design and implementation of the intelligent power management system, which consists of three part: the intelligent Electronic Power Meter (iEPM), the intelligent Electronic Management Concentrator (iEMC), and the intelligent Centralized Database Server (iCDS). The iEPM will be installed in every home of building; because it is based on the technology of impendence identification, iEPM can automatically distinguish which electronic appliance is connected in home. The iEPM is a high precision electronic power meter, so it can replace Electricity Meter currently and require no extra indoor wires. A certain amount of iEPM can be added to a group controlled by an iEMC which adopts the technology of WiFi-based WSN so that it can exchange the message with iCDS. The iCDS solves the key problem of system extension by using the multi-layered architecture; it can automatically send data to the iEPM or update the program of the iEPM. The intelligent power management system can make people use power with safety and efficiency. Using this system, the users or managers of the building can decide which electronic appliance can be used in which time up to their requirement. The system has been widely used in many universities of Tianjin in China, such as Tianjin Normal University, Tianjin Business University, Tianjin Medical University, and so on.

Keywords

Impedance identification Intelligent electronic power meter Wireless sensor network 

References

  1. 1.
    Lee M, Uhm Y, Kim Y, Kim G, Park S (2009) Intelligent power management device with middleware based living pattern learning for power reduction. Consum Electron IEEE Trans 55:2081–2085CrossRefGoogle Scholar
  2. 2.
    Inoue M, Higuma T, Ito Y, Kushiro N, Kubota H (2003) Network architecture for home energy management system. Consum Electron IEEE Trans 49:606–613CrossRefGoogle Scholar
  3. 3.
    Jung Won K, Soon-heung J, Jae-Gon K, Jin-woo H (2007) Development of Qos-Aware ubiquitous content access (UCA) Testbed. Consum Electron IEEE Trans 53:197–203CrossRefGoogle Scholar
  4. 4.
    Roth K, Brodrick J (2008) Home energy displays. ASHRAE J 50:136–138Google Scholar
  5. 5.
    Joon H, Choong Seon H, Seok Bong K, Sang Soo J (2008) Design and implement of control mechanism for standby power reduction. Consum Electron IEEE Trans 54:179–185CrossRefGoogle Scholar
  6. 6.
    Qichang D, Ping D (2009) Network data transmission and information exchange of the wireless meter reading system. Tech Automat Appl 28:39–41Google Scholar
  7. 7.
    Das VV (2009) Wireless communication system for energy meter reading. Adv Recent Technol Commun Comput 2009:896–898Google Scholar
  8. 8.
    Wang Z, Zheng G (2012) Residential appliance identification and monitoring by a nonintrusive method. Smart Grid IEEE Trans 3:80–92CrossRefGoogle Scholar
  9. 9.
    Alexander Charles, Sadiky Matthew (2006) Fundamentals of electric circuits. McGraw-Hill, Boston, pp 387–389. ISBN 9780073301150Google Scholar
  10. 10.
    IEEE Std (2000) 1459–2000 trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions, Institute of Electrical and Electronics Engineers Inc., 0-7381-1963-6Google Scholar
  11. 11.
    Single Phase, BI-directional Power/Energy IC. Cirrus Logic. http://www.cirrus.com/en/pubs/proDatasheet/CS5463_F3.pdf
  12. 12.
    MSP430x13x, MSP430x14x, MSP430x14x1 MIXED SIGNAL MICROCONTROLLER. Texas instruments. http://www.ti.com/lit/ds/symlink/msp430f149.pdf

Copyright information

© Springer Science+Business Media New York 2012

Authors and Affiliations

  1. 1.College of Physics and Electronic InformationTianjin Normal UniversityTianjinChina

Personalised recommendations