Suspension Spinning of High Tc Oxide Superconductor by Using Polyacrylnitrile

  • Tomoko Goto
Part of the An International Cryogenic Materials Conference Publication book series (ACRE, volume 36)


The suspension spinning of a high Tc oxide superconductor by using PAN was studied to prepare a long filament with high Jc. The highest Jc of 1285 × 104 A/m2 at 77 K was obtained for the Y-Ba-Cu-O filament spun through PAN-DMF suspension medium containing the oxide of 92 wt%.

A high-Tc phase superconducting Bi-Pb-Sr-Ca-Cu-O filament was successfully prepared using a combined technique of suspension spinning and densification of the pyrolyzed filament by two stages of pressing and sintering. Zero electrical resistivity was achieved at 90 K and the Jc of the filament at 77 K was 55 ×104 A/m2.


Critical Current Density Dimethyl Acetamide Suspension Medium Poor Densification Hexamethyl Phosphoric Triamide 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    K. Togano, H. Kumakura, H. Maeda, E. Yanagisawa, J. Shimoyama and T. Morimoto, Fabrication of flexible ribbons of high-Tc Bi(Pb)-Sr-Ca-Cu-O superconductors, Jpn.J.Appl.Phys., 28:L95 (1989).CrossRefGoogle Scholar
  2. 2.
    M. Okada, R. Nishiwaki, T. Kamo, T. Matsumoto, K. Aihara, S. Matsuda and M. Seido, Ag-sheathed Tl-Ba-Ca-Cu-O supercondctor tape with Tc=120 K, Jpn. J.Appl.Phys., 27:L2345 (1988).CrossRefGoogle Scholar
  3. 3.
    T. Hikata, K. Sato and H. Hitotsuyanagi, Ag-Sheathed Bi-Pb-Sr-Ca-Cu-O superconducting wires with high critical current density, Jpn.J.Appl.Phys., 28:L82 (1989).CrossRefGoogle Scholar
  4. 4.
    T. Goto and M. Kada, Preparation of high Tc Y-Ba-Cu-O superconducting filaments by suspension spinning method, Jpn.J.Appl.Phys., 26:L1527 (1987).CrossRefGoogle Scholar
  5. 5.
    T. Goto, Nonaqueous suspension spinning of high-Tc Ba-Y-Cu-O superconductor, Jpn.J.Appl.Phys., 27:L680 (1988).CrossRefGoogle Scholar
  6. 6.
    T. Goto and M. Kada, Critical current density of Ba2Y1Cu3O7-X superconducting filaments produced by various suspension spinning conditions, J.Mater.Res., 3:1292 (1988).CrossRefGoogle Scholar
  7. 7.
    T.Goto, Preparation of high-Tc superconducting Bi-Pb-Sr-Ca-Cu-O filament by the suspension spinning method, Jpn.J.Appl.Phys., to be published.Google Scholar
  8. 8.
    T.Goto and K.Yamada, Effects of poly(vinyl alcohol) suspension medium on critical current density of Ba2Y1Cu3 oxide superconducting filaments produced by suspension spinning method, J.Appl.Poly.Sci., in submitting.Google Scholar

Copyright information

© Plenum Press, New York 1990

Authors and Affiliations

  • Tomoko Goto
    • 1
  1. 1.Materials Science & EngineeringNagoya Institute of TechnologyGokiso-cho, Showa-ku, NagoyaJapan

Personalised recommendations