Advertisement

Introduction

  • Ismail C. Noyan
  • Jerome B. Cohen
Part of the Materials Research and Engineering book series (MATERIALS)

Abstract

In 200 B.C., Chinese artisans manufactured thick bronze discs that were flat and polished on one side and had a relief cast on the other face. These were heated and quenched. When such a “magic mirror” was illuminated on the flat face, the reflection showed the pattern of the relief on the other side of the disc! Due to the different cooling rates of the sections with various thicknesses, distortions occurred on the flat side, which mimicked the pattern of the relief. To our knowledge, this is the first deliberate use of residual stresses and strains. Today we know these play a key role in the behavior of welded structures (and hence in ship construction, pipelines and oil rigs), in the response of heat treated or finished parts (ground gears, shot-peened or sand blasted pieces, or material subjected to laser heat treatments, or quenched after a heat treatment). These stresses are also a key factor in the fatigue response of solids, and in the phenomenon known as stress corrosion.

Keywords

Residual Stress HSLA Steel Tensile Residual Stress Medium Carbon Steel Armco Iron 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    W.M. Baldwin Jr., Proc. ASTM 4a, 539 (1949)Google Scholar
  2. 2.
    V. Papazoglou and K. Masubuchi, Final Technical Report, ONR Contract No. N00014-75-C-0469Google Scholar
  3. 3.
    E. Macherauch, Welding Research Institute of London Reprint 11Google Scholar
  4. 4.
    G.M. Rassweiller and W.L. Grube (eds.), “Internal Stresses and Fracture in Metals”, Van Nostrand, New York (1959)Google Scholar
  5. 5.
    O.J. Horger, “Residual Stresses”, Metals Eng. Design, ASME Handbook, 2nd ed., McGraw Hill (1965)Google Scholar
  6. 6.
    F.A. McClintock and A.S. Argon, “Mechanical Behavior of Materials”, Addison-Wesley, Reading, MA (1966), pp. 420–442Google Scholar
  7. 7.
    Proceedings of a Workshop on Nondestructive Evaluation of Residual Stresses, AFML, NTIAC-76–2, Southwest Research Center, San Antonio, TX (1976)Google Scholar
  8. 8.
    S. Taira (ed.), “X-ray Study on Strength and Deformation of Metals”, The Society of Materials Science, Kyoto, Japan (1971)Google Scholar
  9. 9.
    Härterei-Technische Mitteilungen 31, nos. 1 and 2 (1976)Google Scholar
  10. 10.
    Advances In X-ray Analysis 27, 29 (1984)Google Scholar
  11. 11.
    E. Kula and V. Weiss, Eds., “Residual Stresses and Stress Relaxation” 28, Sagamore Army Materials Research Conference Proceedings, Plenum Press, New York (1982)Google Scholar
  12. 12.
    R.G. Bathgate, J. Brit. Soc. for Strain Measurement 4, No.2, 0 (1968)Google Scholar
  13. 13.
    G.A. Alers in Ref. 7Google Scholar
  14. 14.
    D.R. Allen and C.M. Sayers, Ultrasonics p.174 (July 1984)Google Scholar
  15. 15.
    C.G. Gardner, AMMRC CTR 72–22, Army Materials and Mechanics Research Center, Watertown, MA. (1972)Google Scholar
  16. 16.
    M.R. James and O. Buck, CRC Critical Reviews in Solid-State and Materials Science 9 (No. 1), 61 (1980)CrossRefGoogle Scholar
  17. 17.
    M. Hetenyi, J. Appl. Mech., Trans. ASME 60, A149, (1938)Google Scholar
  18. 18.
    A.L. Christenson, ed., “The Measurement of Stress by X-rays”, SAE Technical Report 182, Society of Automotive Engineers, New York, 1960Google Scholar
  19. 19.
    M.E. Hilley, ed., “Residual Stress Measurement by X-ray Diffraction”, SAE Information Report J784a, Society of Automotive Engineers, New York, Aug. 1971Google Scholar
  20. 20.
    Committee on Mechanical Behavior of Materials, “Standard Method for X-ray Stress Measurement”, The Society of Materials Science, Japan 1973Google Scholar
  21. 21.
    H.H. Lester and R.M. Aborn, Army Ordnance 6, 120, 200, 283, 364 (1925–26)Google Scholar
  22. 22.
    F.P. Chiang and C.C. Kin, J. of Metals, May, p. 49 (1983)Google Scholar
  23. 23.
    D. Quesnel, M. Meshii and J.B. Cohen, Mat. Sci. and Eng. 36(2), 207–215 (1978)CrossRefGoogle Scholar
  24. 24.
    M. McClinton and J.B. Cohen, Mat. Sci. & Eng. 56, 259–263 (1982)CrossRefGoogle Scholar
  25. 25.
    W.H. Schlosberg and J.B. Cohen, Met. Trans. 134, 1987–1995 (1982)CrossRefGoogle Scholar
  26. 26.
    H. Dolle and J.B. Cohen, Met. Trans. 11A, 159–164 (1980)Google Scholar
  27. 27.
    J.W. Ho, C. Noyan, J.B. Cohen, V.D. Khanna and Z. Eliezer, Wear 84, 183–202 (1983)CrossRefGoogle Scholar
  28. 28.
    P. Doig and P.E.J. Flewitt, Met. Trans. 10, p. 413 (1979)CrossRefGoogle Scholar
  29. 29.
    M. Murakami, CRC Critical Reviews of Solid State and Materials Science 11 No.4, p. 317 (1984)Google Scholar
  30. 30.
    M.R. James, D.S. Gnanamuthu and R.J. Moores, Scripta Metall. 18, p. 357 (1984)CrossRefGoogle Scholar
  31. 31.
    F.R. Lange, M.R. James and D.J. Green, J. Am. Ceramic Soc. 66, C-16 (1983)Google Scholar
  32. 32.
    D.J. Green, F.F. Lange and M.R. James, J. Am. Ceramic Soc. 66, p.623 (1983)CrossRefGoogle Scholar
  33. 33.
    P. Predecid and C.S. Barrett, J. Composite Materials 13, 61 (1979)CrossRefGoogle Scholar
  34. 34.
    M.R. James and J.B. Cohen, Treatise on Materials Science and Technology 19A, p.1, Academic Press, New York (1980)Google Scholar

Copyright information

© Springer-Verlag New York Inc. 1987

Authors and Affiliations

  • Ismail C. Noyan
    • 1
  • Jerome B. Cohen
    • 2
  1. 1.Thomas J. Watson Research CenterIBMYorktown HeightsUSA
  2. 2.Dept. of Materials Science and Engineering, The Technological InstituteNorthwestern UniversityEvanstonUSA

Personalised recommendations