Abstract
We present an elementary introduction to the art and science of uniaxial strain-shock recovery experiments. Subjects discussed include generation of planar stress waves, design of sample recovery experiments, stress-gage instrumentation, and temperature effects. The emphasis of the present paper is practical; we hope to provide the neophyte with the basic information needed to design and interpret well-characterized shock recovery experiments.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Huber, G.B., “DuPont Line-Wave Generators”, Stanford Research Institute Internal Report No. 040–59, 1959.
Kestenbach, H.-J. and Meyers, M.A., Met. Trans., 7A, 1943 (1976).
Benedick, W.B., “Detonation Wave Shaping”, in “Behavior and Utilization of Explosives in Engineering Design”, eds, L. Davidson, et al., New Mexico Section, Albuquerque, N.M.,p. 47, 1972.
Duvall, G.E., and Fowles, G.R., in “High Pressure Physics and Chemistry”, ed. R.S. Bradley, p. 209, vol. 2, Academic Press, New York, 1963.
Jones, O.E., “Metal Response Under Explosive Loading”, in “Behavior and Utilization of Explosives in Engineering Design”, eds. L. Davidson, et al., ASME, New Mexico Section, Albuquerque, N.M., p. 125, 1972.
Nordstrom, T.V., Rohde, R.W., and Mottern, D.J., Met. Trans., 6A, 156 (1975). 372
Gurney, R.W.,“The Initial Velocities of Fragments From Bombs, Shells, and Grenades,” Rep. 405, BRL, Aberdeen Proving Ground, September 14, 1943.
Gurney, R.W., “Fragmentation of Bombs, Shells, and Grenades”, Rep. 635, BRL, Aberdeen Proving Ground, March 1947.
Sterne, T.E., “A Note On The Initial Velocities Of Fragments From Warheads”, Rep. 648, BRL, Aberdeen Proving Ground, September, 1947.
Henry, I.G., “The Gurney Formula and Related Approximations for the High-Explosive Deployment of Fragments”, Report No. PUB-189, Aerospace Group, Hughes Aircraft Comp., California, April, 1967. AD 81 3398.
Roth, J., “Correlation of the Gurney Formulae for the Velocity of Explosively-Driven Fragment with the Detonation Parameters of the Driver Plate”, Tech. Report 001.71, Poulter Laboratory, Stanford Research Institute, 1971.
McQueen, R.G., Marsh, S.P., Taylor, J.W., Fritz, J.N,, and Carter, W.J., in “High Velocity Impact Phenomena”, ed. R. Kinslow, p. 294, Chapter 7, Academic Press, New York, 1970.
Meyers, M.A., Met. Trans., 8A, 1641 (1977).
Aziz, A.K., Hurwitz, H., and Sternberg, H.M., Phys. Fluids, 4, 380 (1961).
Fowles, G.R., in “Dynamic Response of Materials to Intense Impulsive Loading ”, eds. Chou, P.C., and Hopkins, A,K., Ch. 8, p. 405, Air Force Materials Lab., W-P.A.F.B., 1972.
Graham, R.A., and Asay, J.R., High Temps.-High Pressures, 10, 355 (1978).
Taylor, J.W., in “Metallurgical Effects at High Strain Rates”, eds., Rohde, R.W., Butcher, B.M., Holland, J.R., and Karnes, C.H., p. 107, Plenum Press, N.Y., 1973.
Hsu, K.C., Hsu, C.Y., Murr, L.E., and Meyers, M.A., Chapter 27, this, volume.
Taylor, J.W., J.A.P., 34, 2727 (1960).
Von Holle, W.G., and Trimble, J.J., J.A.P., 47 2391 (1976).
Raikes, S.A., and Ahrens, T.J., Geophys. J.R. Astr. Soc., 58, 717 (1979).
Urtiew, P.A., and Graver, R., J.A.P., 45, 140 (1974).
Grover, R., and Urtiew, P.A., J.A.P., 45, 146 (1974).
Meyers, M.A., and Murr, L.E., Chapter 30, this volume.
Meyers, M.A., Kestenbach, HtJ., and Soares, C.A.O., Mat. Sci. Eng., 45, 143 (1980).
Leslie, W.C., Stevens, D.W., and Cohen, M., in “High-Strength Materials”, ed. Zackay, V.F., p. 382, John Wiley, New York, 1965.
Orava, R.N., and Wittman, R.H., “Techniques for the Control and Application of Explosive Shock Waves”, in Proc. 5th Int, Conf., High Energy Rate Fabrication, U. of Denver, Denver, Colorado, p. 1.1.1., 1975.
McQueen, R.G., Zukas, E.G., “Residual Temperatures in Shock- Loaded Iron”, and Marsh, S.P., ASTM STP No. 336, p. 306, 1962.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1981 Plenum Press, New York
About this chapter
Cite this chapter
DeCarli, P.S., Meyers, M.A. (1981). Design of Uniaxial Strain Shock Recovery Experiments. In: Meyers, M.A., Murr, L.E. (eds) Shock Waves and High-Strain-Rate Phenomena in Metals. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-3219-0_22
Download citation
DOI: https://doi.org/10.1007/978-1-4613-3219-0_22
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-3221-3
Online ISBN: 978-1-4613-3219-0
eBook Packages: Springer Book Archive