Abstract
An experimental effort has been undertaken to examine the effect of surface treatment on various low surface energy thermoplastic materials to promote wettability and bondability of these substrates. Changes in wettability were followed by contact angle measurements. These measurements were correlated with the bondability of treated surfaces using a usual twopart epoxy adhesive. Air-plasma cleaning is a more effective treatment than the usual chemical-acid etching in increasing the surface energy of polymers to make them more wettable and bondable, except for polypropylene and for polytetraf luoroethylene. This work has enabled several satisfactory solutions for bonding these substrates by selecting suitable surface treatments and adhesives for each.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. Houwink and G. Salomon, Editors, “Adhesion and Adhesives”, Vol. 1 and 2, Elsevier, Amsterdam, 1965.
D. H. Kaelble, “Physical Chemistry of Adhesion”, John Wiley and Sons, ( Interscience ), New York, 1971.
I. Skeist, Editor, “Handbook of Adhesives”, Von Nostrand, New York, 1977.
A. J. Kinloch, J. Materials Sci., 15, 2141 (1980).
H. W. Fox and W. A. Zisman, J. Colloid Sci., 7, 428 (1952).
W. A. Zisman, in “Contact Angle, Wettability and Adhesion”, ACS Adv. Chem. Ser., No. 43, p. 1 American Chemical Society, Washington, D. C. 1964.
L. H. Sharpe and H. Schonhorn, ibid, p. 189.
K. L. Mittal, in “Adhesion Science and Technology”, L. H. Lee, Editor, Vol. A, pp. 129–168, Plenum Press, New York, 1975.
K. L. Mittal, Polymer Eng. Sci., 17, 467 (1977).
J. A. Koutsky, in “Surface Contamination: Genesis, Detection and Control”, K. L. Mittal, Editor, Vol. 1, pp. 351–357, Plenum Press, New York, 1979.
H. Schonhorn and R. H. Hansen, J. Polymer. Sci., 84, 203 (1966).
D. K. Ovens and R. C. Wendt, J. Appl. Polymer. Sci., 13, 1741 (1969).
J. S. Tira, “Gas Plasma Treatment to Improve the Bondability fo an.RTV Silicone to Foamed Polypropylene”, Department of Energy, Contract Number DE-AC04-76-DP00613, BDPX-613-2224 (Rev), July 1979.
N. J. De Lollis, “Activated Gas Treatment of Silicone Surfaces”, Sandia Laboratories, Albuquerque, New Mexico, report SAND 77 — 1256C, 1977.
D. Briggs, D. G. Rance, C. R. Kendall and A. R. Blythe, Polymer, 21, 895 (1980).
M. R. Wertheimer and H. P. Schreiber, J. Appl. Polymer. Sci., 26, 2987 (1981).
T. Riley, T. C. Mahuson and K. Seibert, “Investigation into the effect of plasma pretreatment on the adhesion of Parylene to various substrates”, National Aeronautics and Space Administration, Lewis Research Center, Contract 8110-72-0435, pp. 95–114, 1981.
G. L. Flowers and J. L. Montague, “Evaluation of Cleaning Procedures and Bonding Materials for TPX Materials”, Department of Energy, Washington, D. C. MHSMP-8140, Contract AC04-76DP00487, pp. 1–9, 1981.
W. L. Baun, in “Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings”, K. L. Mittal, Editor, pp. 41–53, American Society for Testing and Materials, Philadelphia, PA, 1980.
K. L. Mittal, Pure Appl. Chem., 52, 1295 (1980).
W. L. Baun, in “Adhesion Aspects of Polymeric Coatings”, K. L. Mittal, Editor, pp. 131–146, Plenum Press, New York, 1983.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Plenum Press, New York
About this chapter
Cite this chapter
Jeandrau, J.P. (1984). Investigation into the Effect of Surface Treatment on the Wettability and the Bondability of Low Surface Energy Materials. In: Mittal, K.L. (eds) Adhesive Joints. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2749-3_9
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2749-3_9
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9702-4
Online ISBN: 978-1-4613-2749-3
eBook Packages: Springer Book Archive