Abstract
Two new processes have been developed that are based on laser heated gases. Both permit unusually precise levels of process control and thereby materials having superior properties.
The powder process yields Si, Si3N4 and SiC powders that are uniform in size, non-agglomerated, small diameter, spherically shaped and high purity. Manufacturing cost analyses show that sub- micron powders can be made with an energy cost of approximately 2 kWhr/kg and a dollar cost of 2–3.30 $/kg exclusive of the costs of feed materials. This type of process should be capable of producing technically superior, lower cost submicron powders than existing processes.
The laser induced chemical vapor deposition process (LICVD) causes reactant gases to be heated by absorbing IR light from a laser beam that passes parallel to the substrate surface. Laser heating permits independent control of gas and substrate temperatures while operating in a conventional thermally activated CVD mode. For hydrogenated amorphous silicon films, this is particularly important because deposition rates are determined by the high gas temperatures and film properties by the low substrate temperatures. Spin density, hydrogen content, electrical conductivity and mobility gap properties show the LICVD process capable of producing very high quality films.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
W. R. Cannon, S. C. Danforth, J. H. Flint, J. S. Haggerty, R. A. Marra, “Sinterable Ceramic Powders from Laser Driven Reactions; Part I: Process Description and Modeling”, J. Am. Ceram. Soc., 65, 7: 324–30 (1982).
W. R. Cannon, S. C. Danforth, J. S. Haggerty, and R. A. Marra, “Sinterable Ceramic Powders from Laser Driven Reactions; Part II: Powder Characteristics and Process Variables”, J. Am. Ceram. Soc., 65, 7: 330–5 (1982).
T. R. Gattuso, M.. Meunier, D. Adler, and J. S. Haggerty, “IR Laser-Induced Deposition of Thin Films”, in Laser Diagnostics and Photochemical Processing for Semiconductor Devices, R. M. Osgood, S. R.J. Bruek, H. R. Schlossberg, Eds., North- Holland, 215–221, (1983).
E. Barringer, N. Jubb, B. Fegley, R. L. Pober and H. K. Bowen, “Processing Monosized Powders”, Int. Conf. on Ultra-structure Processing of Ceramics, Glasses and Composites, Eds. L. L. Hench and D. R. Ulrich, Wiely & Sons, New York (1983).
E. A. Barringer and H. K. Bowen, “Formation, Packing, and Sintering of Monodisperse Ti02 Powders”, J. Am. Ceram. Soc., 65, 12:C199–C210.
M. Hirose, “Physical Properties of Amorphous CVD Silicon”, J. de Physique, C4: 705–14 (1981).
W. Paul and D. Anderson, “Properties of Amorphous Hydrogenated Silicon with Special Emphasis on Preparation by Sputtering”, Sol. En. Mat., 5: 229–316 (1981).
H. Fritzsche, “Characterization of Glow-Discharge Deposited a-Si:H”, Sol. En. Mat., 3: 447–501 (1980).
J. H. Flint, “Powder Temperature in Laser Driven Reactions”, M. S. Thesis, M.I.T., February 1982.
R. A. Marra, “Homogeneous Nucleation and Growth of Silicon Powder from Laser Heated Gas Phase Reactants”, Ph.D. Thesis, M.I.T., February 1983.
M. Meunier, T. R. Gattuso, D. Adler, and J. S. Haggerty, “Hydrogenated Amorphous Silicon Produced by Laser Induced Chemical Vapor Deposition of Silane”, Appl. Phys. Lett., 43: 273 (1983).
J. S. Haggerty and W. R. Cannon, “Sinterable Powders from Laser Driven Reactions”, MIT-EL 79-047, ARPA Order No. 3449, Dept. of Navy, Office of Naval Research, Arlington, VA., Contract No. N00014-77-C-0581, July 1979.
G. Greskovich, and J. H. Rosolowski, “Sintering of Covalent Solids”, J. Am. Ceram. Soc., 59: 285–8 (1976).
A. D’Slessio, A. Dilorenzo, A. F. Sarofim, F. Beretta, S. Masi, and C. Venitozzi, “Soot Formation in Methane-Oxygen Flames”, Fifteenth Symposium (International) on Combustion 1427, (1975), The Combustion Institute, Pittsburgh, PA.
J. S. Haggerty, “Sinterable Powders from Laser Reactions”, MIT-EL 82-002, Final Report N00014-77-C-0581, September 1981.
Y. Suyama, R. A. Marra, J. S. Haggerty, and H. K. Bowen, “Synthesis of Ultrafine SiC Powders by Laser Driven Gas Phase Reactions”. Submitted for publication to the J. Am. Ceram. Soc., October 1982.
S. Mizuta, W. R. Cannon, A. Bleier, and J. S. Haggerty, “Wetting and Dispersion of Silicon Powder Without Deflocculants”, Am. Ceram. Soc. Bull., 61: 872–5 (1982).
S. C. Danforth, (Rutgers University, NJ), and M. Dahlen, (Volvo,Sweden), unpublished results.
G. Garvey, M.I.T., unpublished results.
R. S. Aries, and R. D. Newton, Chemical Engineering Cost Estimation, Chemonomics, Inc., N.Y., April (1951).
R. H. Baney, Dow Corning, private communication.
F. Chambers, Standard Oil Co. (Indiana), private communication.
P. Orinsnshky, Union Carbide Co., private communication.
R. Cannon, M.I.T., (Berkeley University, CA), private communication.
“Comminution and Energy Consumption”, National Materials Advisory Board (NAS-NAE), PB81-225708, May 1981.
Y. Hamakawa, “Recent Advances in Amorphous Silicon Solar Cells” Solar Energy Materials, 8: 101 (1982).
P. G. LeComber, A. J. Snell, K. D. Mackenzie and W. E. Spear, “Applications of a-Si Field Effect Transistors in Liquid Crystal Displays and in Intrigated Logic Circuits”, J. de Physique, C4: 423–32 (1981).
B. A. Scott, R. M. Placenik, and E. E. Simonyi, “Low Defect Density Amorphous Hydrogenated Silicon Prepared by Homogeneous Chemical Vapor Deposition”, Appl. Phys. Lett., 39: 73 (1981).
R. Bilenchi, I. Gianinoni, M. Musci and R. Murri, “Laser Induced Chemical Vapor Deposition of Hydrogenated Amorphous Silicon”,Laser Diagnostics and Photochemical Processing for Semiconductor Devices, R. M. Osgood, S. R. J. Brueck, H. R. Schlossberg, Eds., North-Holland, 199–205 (1983).
M. Meunier, J. H. Flint, D. Adler and J. S. Haggerty, “Laser Induced Chemical Vapor Deposition of Hydrogenated Amorphous Silicon”, Elect. Mat. Conf., Burlington, Vermont (1983).
M. Meunier, J. H. Flint, D. Adler and J. S. Haggerty, “Hydrogenated Amorphous Silicon Produced by Laser Induced Chemical Vapor Deposition of Silane” Proceedings of the 10th International Conference on Amorphous and Liquid Semiconductors, Tokyo, Japan, August 22–26, 1983.
C. G. Newman, H. E. O’Neal, M. A. Ring, F. Leska and N. Shipley “Kinetics and Mechanism of the Silane Decomposition”, Int. J. Chem. Kinetics, XI 1167 (1979).
P. Hey and B. 0. Seraphin, “The Role of Hydrogen in Amorphous Silicon Films Deposited by the Pyrolytic Decomposition of Silane”, Sol. En. Mat., 8: 215–30 (1982).
H. Fritzsche, “Characterization of Glow-Discharge Deposited a-Si:H”, Sol. En. Mat., 3 447–501, (1980).
B. A. Scott, J. A. Reimer, R. M. Placenik, E. E. Simonyi and W. Reuter, “Low Defect Density Amorphous Hydrogenated Silicon Prepared by Homogeneous Chemical Vapor Deposition”, Appl. Phys. Lett., 40: 973 (1982).
J. Tauc., “Optical Properties of Non-Crystalline Solids” in Optical Properties of Solids, Ed. F. Abeles, North-Holland, Amsterdam, p. 227–313, (1970).
C. D. Cody, C. R. Wronski, B. Abeles, R. B. Stephens and B. Brooks, “Optical Characterization of Amorphous Silicon Hydride Films” in Solar Cells, 2:227–243 (1980).
N. F. Mott, and E. A. Davis, Electronic Processes in Non-Crystalline Materials, 2nd Ed., Clarendon Press, Oxford, (1979).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1985 Plenum Press, New York
About this chapter
Cite this chapter
Haggerty, J.S. (1985). Synthesis of Ceramic Powders and Surface Films From Laser Heated Gases. In: Bruggeman, G., Weiss, V. (eds) Innovations in Materials Processing. Sagamore Army Materials Research Conference Proceedings, vol 30. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2411-9_19
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2411-9_19
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9469-6
Online ISBN: 978-1-4613-2411-9
eBook Packages: Springer Book Archive