Abstract
Many transducers incorporate feedback in order to improve accuracy, linearity and speed of response of a measurement. This paper outlines the advantages of feedback, and shows many examples of its use. (Eds.)
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aalto M. I. and Ehnholm G. J. (1973) A self-balancing resistance bridge. J. Phys. E.: Sci. Instrum. 6, 614 - 8.
Agar J. (1969) Frequency-modulating trans- ducers Radio Electron. Engng 38, 89 - 97.
Allgeier R. L. and Reger J. A. (1968) New automatic dewpoint atmosphere control. Proc. 18th ISA Iron and Steel Instrumentation Symp. ( Pittsburgh: ISA ) pp. 105–121.
Auckland D. W. and Hawke J. R. (1978) A thread-tension transducer using torque-balance about the axis of a motor. Proc. Transducer ‘78 Conf. ( Tavistock: Trident International Exhibitions).
Black H. S. (1934) Stabilised feedback amplifier. Bell Syst. Tech. J. 13, 1.
Blair D. P. and Sydenham P. H. (1975) Instrument science: phase-sensitive detection as a means to recover signals buried in noise. J. Phys. E: Sci. Instrum. 8, 621 - 7.
Broadbent T. E., Cooper R. and Elliott C. T. (1965) A direct-reading, attracted-disc, absolute voltmeter J. Sci. Instrum. 42, 618–20.
Doebelin E. O. (1975) Measurement Systems — Applications and Design( New York: McGraw-Hill).
Electronics Industry (1976) In-circuit DC current measurement. 2, No. 1115.
Euser P. (1963) Compensation pyrometer. Instrum. Pract. 17, 487 - 9.
Finkelstein L. (1977) Instrument science: introductory article. J. Phys. E: Sci. Instrum. 10, 566–72.
Gardner F. M. (1966) Phase-lock Techniques( New York: Wiley).
Geyger W. A. (1964) Nonlinear Magnetic Control Devices( New York: McGraw-Hill).
Giffard R. P. (1973) A simple low-power self-balancing resistance bridge./ Phys. E: Sci. Instrum. 6, 719–23.
Goldsmid H. J. (1960) Principles of thermoelectric devices. Br. J. Appt. Phys. 11, 209–17.
Greig J. (1950) Developments in the teaching of electrical measurements. Proc. IEE 97, 55 1–4.
Halford R. J. (1964) Pressure measurement using vibrating-cylinder pressure transducer. Instrum. Pract. 18, 823–9.
Herceg E. E. (1976) Handbook of Measurement and Control( Pennsauken: Schaevitz Engineering).
Hermach F. L. (1976) AC-DC comparators for audio-frequency current and voltage measurements of high frequency. IEEE Trans. Instrum. Meas. 25, 489–94.
Johnson A. W. (1977) Digital indicator brings DVM accuracy to pressure measurement. Control Instrum. 9, 63–5.
Jones B. E. (1970) Clip-on DC voltmeter. J. Phys. E: Sci. Instrum.3, 101–4.
Jones B. E. (1971) Portable clip-on AC multimeter to measure voltage, current, active and reactive power, and power factor. Control Instrum. 3, 37–41.
Jones B. E. (1974) Feedback-measuring systems. Electron. Power 20, 566 - 9.
Jones B. E. (1976) Unified course in measurement and control. Control Engineering in Undergraduate Courses, Proc. Conf., Teesside Polytechnic UK B2/1-B2/5.
Jones B. E. (1977) Instrumentation, Measurement and Feedback( Maidenhead: McGraw-Hill).
Jones B. E. and Gharakhanian A. (1977) An electrostatic wattmeter employing automatic voltage feedback to the quadrants to achieve torque balance. Euromeas 77: Precise Electrical Measurement: IEE Conf Publ. 152, 129–31.
Jones B. E. and McNaughton H. M. (1974) An investigation of open-and closed-loop tilt monitors employing electrolytic spirit levels. J. Phys. E: Sci. Instrum. 7, 582 - 5.
Jones B. E. and McNaughton H. M. (1977) A cathode-ray tube actuator in a non-contact analogue tachometer. Proc. IEE 124, 669–72.
Jones B. E. and Mirza N. A. (1977) Feedback electrostatic wattmeter using a non-contact moving-coil actuator. Proc. IEE 124, 1259–62.
Kelsall D. (1963) An automatic emissivity-compensated radiation pyrometer. J. Sci. Instrum. 40, 1–4.
Korobcv J., Piguet G. and Pun L. (1965) High-precision temperature-measuring device. Control 9, 168.
Larsen N. T. (1976) A new self-balancing DCsubstitution RF power meter. IEEE Trans. Instrum. Meas. 25, 343–7.
Lövborg L. (1965) A linear temperature-tofrequency converter. J. Sci. Instrum. 42, 611–4.
MacDonald W. R. (1961) Flight Test Instrumentation, ed. M. A. Perry ( Oxford: Pergamon ) pp. 15–23.
Mayr O. (1970) The origins of feedback control. Sci. Am. 223, 110–8.
Morrison R. (1970) DC Amplifiers in Instrumentation( New York: Wiley).
Neubert H. K. P. (1975) Instrument Transducers( London: Oxford University Press).
Neubert H. K. P. and Price E. F. (1969) Vibrating-contact pressure monitor. In-strum. Control Syst. 42, 81–4.
N-nagy F. L. and Joyce G. C. (1972) Micro-movement control systems Proc. 5th World Congr. IFAC Part 2b No. 23.6 pp 1–9.
Oliver F. K. (1972) Practical Instrumentation Transducers( London: Pitman).
Pollock N. (1975) A simple high-performance device for measuring strain-gauge transducer outputs. J. Phys. E: Sci. Instrum. 8, 1049–52.
Rohrbach C. (1967) Handbuch fur elektrisches Messen mechanischer Grössen( Düsseldorf: VDI Verlag).
Serra G. F. (1966) Force-balance principle raises accuracy of digital pressure transducer. J. Instrum. Soc. Am. 13, 51 - 54.
Sherwood W. M. (1969) The search for a true digital transducer. Control Engng, 95–8.
Somerville M. J. and Turnbull G. F. (1963) Self-generating HF carrier feedback anemometer. Proc. IEE 110, 1905 - 14.
Togawa T., Nemoto T., Yamazaki T. and Kobayashi T. (1976) A modified internal temperature measurement device. Med. Biol. Engng 14, 361 - 4.
Turnbull G. F. and Jones B. E. (1966) Highinput-impedance clip-on AC voltmeter. Proc. IEE 133, 908 - 14, 1695.
Voutsas A. M. (1963) Twisted beam transducer. AIAAJ. 1, 911–3.
Walton H. (1975) Developments in accurate non-contact measuring techniques. J. Br. Nucl. Energy Soc. 14, 341–5.
Warsza Z. L. (1976) Hall effect feedback transducers and their application. Proc. IMEKO VII BTS/274 1–8( London: Institute of Measurement and Control).
Wayne Kerr (1975) Some Notes on Bridge Measure-ment( Bognor Regis: Wayne Kerr Co.).
Welkowitz W. and Deutsch S. (1976) Biomedical Instruments: Theory and Design( London: Academic Press).
Wightman E. J. (1972) Instrumentation in Process Control( London: Butterworths).
Woolvet G. A. (1977) Transducers in Digital Systems( Stevenage: Peregrinus).
Wyman P. R. (1973) A new force-to-frequency transducer. Digital Instrumentation: ZEE Conf. Publ. 106, 117–23.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1990 Chapman & Hall
About this chapter
Cite this chapter
Jones, B.E. (1990). Feedback in instruments and its applications. In: Loxton, R., Pope, P. (eds) Instrumentation: A Reader. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2263-4_15
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2263-4_15
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-412-53400-3
Online ISBN: 978-1-4613-2263-4
eBook Packages: Springer Book Archive