Abstract
Dissolution of refactory oxides, such as Al2O3, in molten silicates has generally been considered to be a homogeneous reaction1–7. Homogeneous dissolution occurs when atoms of the solid dissolve directly into the liquid with atoms diffusing into the liquid and concentration gradients forming in the liquid at the interface. The dissolution rates are dependent upon transport in the molten silicate and proportional to the square root of time 2–4, 6–8. Heterogeneous dissolution, also referred to as in- congruent dissolution6, occurs when one or more solid reaction phases with compositions different from either the oxide or the liquid form at the solid-liquid interface. Since mass transport by diffusion is generally slower in solids than in liquids, transport in the solid will generally determine dissolution rates8.
Supported by the U.S. Department of Energy under Contract DE-ACO6-76RLO 1830.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
L. Reed and L.R. Barrett, “The Slagging of Refractories,” Trans. Brit. Cer. Soc., 63 [11] 671–676 (1955).
A.R. Cooper, Jr. and W.D. Kingery, “Corrosion of Refractories by Liquid Slags and Glasses”; pp 85–92 in Kinetics of High-Temperature Processes, edited by W.D. Kingery, John Wiley and Sons, NY, 1959.
A.R. Cooper, Jr., and W. D. Kingery, “Dissolution in Ceramic Systems: I, Molecular Diffusion, Natural Convection and Forced Convection in Calcium Aluminum Silicates,” J. Am. Ceram. Soc. 47 [10] 37–43 (1964).
B.M. Samaddar, W.D. Kingery and A.R. Cooper, Jr., “Dissolution in Ceramic Systems:II, Dissolution of Alumina, Mullite, Anorthite and Silica in a Calcium-Aluminum-Silicate Slag,” J. Am. Ceram. Soc. 47 [5] 249–254 (1964).
L. Reed and L.R. Barrett, “The Slagging of Refractories:II, The Kinetics of Corrosion,” Trans. Brit. Cer. Soc. 63 [10] 509–534 (1964).
Y. Oishi, A. R. Cooper, Jr., and W.D. Kingery, “Dissolution in Ceramic Systems:III, Boundary Layer Concentration Gradients,” J. Am. Ceram. Soc. 48 [2] 88–95 (1965).
W.D. Kingery, H. K. Bowen and D.R. Uhlmann, Introduction to Ceramics, pp. 381–446, John Wiley and Sons, N.Y., (1976)
H. Schmalzried, “Solid-State Reactions Between Oxides,” pp. 83–107 in Defect and Transport in Oxides, edited by M.S. Seltzer and R.I. Jaffee, Plenum Press, N.Y. (1973).
C.R. Kennedy, “Refractories for Application in Slagging Gassifiers” pp.K60–K94, in Materials for Coal Conversion and Utilization, CONF-791014, U.S. Department of Energy (1979).
E.A. Snajdr, B. Klaudinyi, J.A. Middleton and D.S. Yang, “Evaluation of Slag and Refractory Compatibility for Low-BTU Gasification of Coal for Electric Power Generation,” Combustion Engineering, Inc. FE-1545-48 (1977).
J. Lambert Bates, “Heterogeneous Dissolution of Refractory Oxides in Molten Ca-Al-Silicate” J. Am. Ceram.Soc. 70, 1987.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1987 Plenum Press, New York
About this chapter
Cite this chapter
Lambert Bates, J. (1987). Interfaces in Heterogeneous Dissolution of Oxides in Molten Ca-Al-Silicates. In: Pask, J.A., Evans, A.G. (eds) Ceramic Microstructures ’86. Materials Science Research, vol 21. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-1933-7_44
Download citation
DOI: https://doi.org/10.1007/978-1-4613-1933-7_44
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9074-2
Online ISBN: 978-1-4613-1933-7
eBook Packages: Springer Book Archive