Abstract
Recently there has been increased interest in the development of high-level architectural synthesis tools targeting power optimization. In this paper, we first present an overview of the various architecture synthesis tasks and analyze their influence on power consumption. A survey of previously proposed techniques is given, and areas of opportunity are identified. We next propose a new architecture synthesis technique for low-power implementation of real-time applications. The technique uses algorithm partitioning to preserve locality in the assignment of operations to hardware units. Preserving locality results in more compact layouts, reduced usage of long high-capacitance buses, and reduced power consumption in multiplexors and buffers. Experimental results show reductions in bus and multiplexor power of up to 80% and 60%, respectively, resulting in 10–25% reduction in total power.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
A. Chandrakasan, M. Potkonjak, R. Mehra, J. Rabaey, and R.W. Brodersen, “Optimizing power using transformations,” IEEE Transactions on CAD pp. 12–31, Jan. 1995.
R. Mehra and J.M. Rabaey, “Behavioral level power estimation and exploration,” Proceedings of the International Workshop on Low-Power Design pp. 197–202, April 1994.
K. Keutzer and P. Vanbekbergen, “Impact of CAD on the design of low power digital circuits,” Symposium on Low Power Electronics pp. 42–45, Oct. 1994.
A. Raghunathan and N.K. Jha, “Behavioral synthesis for low-power,” Proceedings of the International Conference on Computer Design pp. 318–322, Oct. 1994.
E. Musoll and J. Cortadella, “High-level synthesis techniques for reducing the activity of functional units,” Proceedings of the International Symposium on Low-Power Design pp. 99–104, April 1995.
A. Chatterjee and R. Roy, “Synthesis of low power linear DSP circuits using activity metrics,” Proceedings of the International Conference of VLSI Design pp. 265–270, Jan. 1994.
J.M. Chang and M. Pedram, “Register allocation and binding for low power,” Proceedings of the ACM/IEEE Design Automation Conference pp. 29–35, June 1995.
D.D. Gajski, High-Level Synthesis: Introduction to Chip and System Design, Kluwer Academic Publishers, Boston, 1992.
R.A. Walker and R. Camposano, A Survey of High Level Synthesis Systems Kluwer Academic Publishers, Boston, 1991.
H.J.M. Veendrick, “Short-circuit dissipation of static CMOS circuitry and its impact on the design of buffer circuits,” IEEE Journal of Solid-State Circuits pp. 468–473, Aug. 1984.
A. Raghunathan and N.K. Jha, “An iterative improvement algorithm for low power data path synthesis,” Proceedings of the International Conference on CAD pp. 597–602, Nov. 1995.
L. Goodby, A. Orailoglu, and P.M. Chau, “Microarchitectural synthesis of performance constrained, low-power VLSI designs,” Proceedings of the International Conference on Computer Design pp. 323–326, Oct. 1994.
F. Catthoor, F. Franssen, S. Wuytack, L. Nachtergaele, and H. De Man, “Global communication and memory optimizing transformations for low-power signal processing systems,” VLSI Signal Processing Workshop, pp. 178–187, Oct. 1994.
A.H. Farrahi, G.E. Tellez, and M. Sarrafzadeh, “Memory segmentation to exploit sleep mode operation,” Proceedings of ACM/IEEE Design Automation Conference, pp. 36–41, June 1995.
S. Wu, “A hardware library representation for the hyper synthesis system,” Masters’ Thesis, University of California, Berkeley, Memorandum No. UCB/ERL M94/47, June 1994.
J.M. Rabaey, C. Chu, P. Hoang, and M. Potkonjak, “Fast prototyping of datapath-intensive architectures,” IEEE Design & Test of Computers pp. 40–51, June 1991.
M.C. McFarland and T.J. Kowalski, “Incorporating bottom-up design into hardware synthesis,” IEEE Transactions on CAD Vol. 9, No. 9, pp. 938–949, Sept. 1990.
E.D. Lagnese and D.E. Thomas, “Architectural partitioning for system level synthesis of integrated circuits,” IEEE Transactions on CAD Vol. 10, No. 7, pp. 847–860, July 1991.
B.W. Kernighan and S. Lin, “An efficient heuristic procedure for partitioning graphs,” Bell System Technical Journal Vol. 49, pp. 291–307, Feb. 1970.
C.M. Fiduccia and R.M. Matteyses, “A linear-time heuristic for improving network partitions,” Proceedings of the ACM/IEEE Design Automation Conference pp. 175–181, June 1982.
S. Kirkpatrick, C.D. Gelatt, and M.P. Velatt, “Optimization by simulated annealing,” Science Vol. 220, No. 4598, pp. 671–680, May 1983.
G. Vijayan, “Partitioning logic on graph structures to minimize routing cost,”IEEE Transactions on CAD pp. 1326–1334, Dec.
W.E. Donath, “Logic partitioning,”Physical Design Automation of VLSI Systems (Eds.) B. Preas and M. Lorenzetti, Benjamin/Cummings, pp. 65–86, 1988.
D.G. Schweikert and B.W. Kernighan, “A proper model for the partitioning of electrical circuits,” Proceedings of the ACM/IEEE Design Automation Conference pp. 57–62, 1972.
Y.C. Wei and C.K. Cheng, “Ratio cut partitioning for hierarchical designs,” IEEE Transactions on CAD Vol. 10, pp. 911–921, July 1991.
L. Hagen and A.B. Kahng, “New spectral methods for ratio cut partitioning and clustering,” IEEE Transactions on CAD Vol. 11, No. 9, pp. 1074–1085, Sept. 1992.
C.J. Alpert and A.B. Kahng, “Geometric embeddings for faster and better multi-way netlist partitioning,” Proceedings of the ACM/IEEE Design Automation Conference pp. 743–748,1993.
E.R. Barnes, “An algorithm for partitioning the nodes of a graph,” Siam Journal of Algorithms and Discrete Methods Vol. 3, No. 4, pp. 541–549, 1994.
P.K. Chan, M.D.F. Schlag, and J. Zien, “Spectral K-way ratiocut partitioning and clustering,” IEEE Transactions on CAD Vol. 13, No. 9, pp. 1088–1096, 1994.
J. Frankle and R.M. Karp, “Circuit placement and cost bounds by eigenvector decomposition,” Proceedings of the International Conference on CAD pp. 414–417, 1986.
H.D. Simon, “Partitioning of unstructured problems for parallel processing,” Computing Systems in Engineering Vol. 2, No. 2/3, pp. 135–148, 1991.
B. Hendrickson and R. Leland, “The Chaco user’s guide, V. 1.0,” Tech. Report SAND93–2339, Sandia National Lab., Oct. 1993.
K.M. Hall, “An r-dimensional quadratic placement algorithm,” Management Science Vol. 17, No. 3, pp. 219–229, Nov. 1970.
T. Lengauer, Combinatorial Algorithms for Integrated Circuit Layout, Wiley-Teubner, Chichester, U.K., 1990.
P.G. Paulin and J.P. Knight, “Force-directed scheduling for behavioral synthesis of ASIC’s,” IEEE Transactions on CAD Vol. 8, No. 6, pp. 661–679, June 1989.
M. Potkonjak and J.M. Rabaey, “Scheduling algorithms for hierarchical data control flow graphs,” International Journal of Circuit Theory and Applications Vol. 20, No. 3, pp. 217–233, May-June 1992.
P.E. Landman and J.M. Rabaey, “Architectural power analysis: The dual bit type method,” IEEE Transactions on VLSI Systems Vol. 3, No. 2, pp. 173–187, June 1995.
R.W. Brodersen, (ed.), Anatomy of a Silicon Compiler Kluwer Academic Publishers, Boston, 1992.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Kluwer Academic Publishers
About this chapter
Cite this chapter
Mehra, R., Guerra, L.M., Rabaey, J.M. (1996). Low-Power Architectural Synthesis and the Impact of Exploiting Locality. In: Chandrakasan, A.P., Brodersen, R.W. (eds) Technologies for Wireless Computing. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-1453-0_10
Download citation
DOI: https://doi.org/10.1007/978-1-4613-1453-0_10
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-8633-2
Online ISBN: 978-1-4613-1453-0
eBook Packages: Springer Book Archive