Advertisement

Tension Softening and Size Effects on the Fracture Determination of Geomaterials

  • V. C. Li
  • K. P. Chong
  • H. H. Einstein
Conference paper

Abstract

While the linear elastic fracture mechanics (LEFM) based KIc fracture toughness test has been well established for metals, its direct application to toughness testing of most quasi-brittle geomaterials has not been consistently successful. In this paper we briefly review experimental and field observations of KIc size dependence in concrete and rock, and suggest that a valid KIc test for some such materials may require unpractically large specimen sizes. An alternative material tensile property - the tension softening curve - is given prominence in its ability to characterize crack formation and growth in geomaterials, and could be determined in the laboratory with reasonable specimen sizes. An experimental technique, originally developed for concrete, is suggested to be of value in determining the tension-softening curves for rocks.

Keywords

Fracture Toughness Hydraulic Fracture Process Zone Linear Elastic Fracture Mechanic Fracture Toughness Test 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Chong, K.P. and J.W. Smith, eds, Mechanics of Oil Shale, Elsevier (1984).Google Scholar
  2. [2]
    Simonson, E.R., A.S. Abou-Sayed and R J. Clifton, “Constamment of Massive Hydraulic Fracture”, SPE paper No. 6089, 51st Annual Fall Meeting of SPE of ATME (1976).Google Scholar
  3. [3]
    Schmidt, R.A., “Fracture Toughness of Limestone”, Exper. Mech. 16, 161–167 (1976).CrossRefGoogle Scholar
  4. [4]
    Kusmaul, J.S., “Numerical Modeling of Oil Shale Fragmentation Experiments”, Proceedings 11th Annual Society of Explosives Engineers Conf., C.S. Konya, ed., San Diego, California (1985).Google Scholar
  5. [5]
    Wecharatana M. and S.P. Shah, “Prediction of Nonlinear Fracture Process Zone in Concrete”. Journal of EMD of ASCE 109, 1231–1246 (1983).CrossRefGoogle Scholar
  6. [6]
    Goldsmith, W, ed. “Assessment of Experimental Techniques Applicable to Rock Fracture”, a report on an NSF workshop, Utah, (1986).Google Scholar
  7. [7]
    Medlin W.L. and Fitch J.L., “Abnormal Treating Pressures in MHF Treatments”. SPE Paper 12108. 58th Annual Conference. San Francisco, CA, Oct., (1983).Google Scholar
  8. [8]
    Warpinski, N.R., “MWX Paludal In Situ Stress Measurements and Hydraulic Fracture Behavior”. Memorandum. Sandia National Labs. Oct, (1984).Google Scholar
  9. [9]
    Warpinski, N.R., “Summary of Results of MWX Paludal Zone Phase I Stimulation”. Memorandum of Record. Sandia National Labs., Jan, (1984).Google Scholar
  10. [10]
    Shlyapobersky, J., “Energy Analysis of Hydraulic Fracturingw”, in the 26th US Symposium on Rock Mechanics. Rapid City, SD, pp. 539–546, June, (1985).Google Scholar
  11. [11]
    Ingraffea, A.R., Gaunsallus, K.L., Beech, J.F. and Nelson, P.P., “A Short Rod Based System for Fracture Toughness Testing of Rock”, ASTM STP 855 Chevron-Notched Specimens: Testing and Stress Analysis, Louisville, p.152–166, (1983).Google Scholar
  12. [12]
    Li, V.C., “Mechanics of Shear Rupture Applied to Earthquake Zones”, book chapter in Rock Fracture Mechanics, ed. B. Atkinson, Academic Press, (1986).Google Scholar
  13. [13]
    Atkinson, B., “Experimental Methods in Rock Fracture Testing”, in Rock Fracture Mechanics, edited by B. Atkinson, Academic Press, (1986).Google Scholar
  14. [14]
    Francois, D., “Fracture and Damage Mechanics of Concrete”, in Application of Fracture Mechanics to Cementitious Composites, edited by S.P.Shah, Martinus Nijhoff Publishers, p141–56, 1985.Google Scholar
  15. [15]
    Peng, Syd S., “A Note on the Fracture Propagation and Time-Dependent Behavior of Rocks in Uniaxial Tension”, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol 12, 125–127, Pergamon Press, (1975).Google Scholar
  16. [16]
    Li, V.C. and E. Liang, “Fracture Processes in Concrete and Fibre-Reinforced Cementitious Composites”, ASCE. J. Engineering Mechanics, Vol. 122 No. 6, pp. 566–586, (1986).MathSciNetCrossRefGoogle Scholar
  17. [17]
    Labuz, J.F., Shah, S.P., and CH. Dowding, “Measurement and Description of the Tensile Fracture Process in Rock”, submitted to J. Geophys. Res. (1986).Google Scholar
  18. [18]
    Rice, J.R, “Mathematical Analysis in the Mechanics of Fracture”, in Fracture: An Advanced Treatise. Vol. 2, Academic Press, pp. 191–311, (1968).Google Scholar
  19. [19]
    Li, V.C. and C.M. Chan and C. Leung, “Experimental Determination of the Tension-Softening Curve in Cementitious Composites”, accepted for publication in Cement and Concrete Research, (1986).Google Scholar
  20. [20]
    Leung, C.K.Y, and V. C. Li, “Determination of Fracture Toughness Parameter of Quasi-Brittle Materials with Laboratory-Size Specimens”, Proc. Intl Conf. on Fracture Concrete and Rock. SEM, Houston, TX, (1987).Google Scholar
  21. [21]
    Chong K.P. and M.D. Kuruppu, “New Specimen for Fracture Toughness Determination of Rock and Other Materials”, Int. J. Fract., 26, R 59–R 62 (1984).CrossRefGoogle Scholar
  22. [22]
    Chong, K.P., M.D. Kuruppu and J.S. Kuszmaul, “Fracture Toughness Determination of Rocks with Core-Based Specimens”, keynote paper. Proc. Int’l Conf. on Fracture of Concrete and Rock. SEM, Houston, TX (1987).Google Scholar

Copyright information

© Springer-Verlag New York Inc. 1989

Authors and Affiliations

  • V. C. Li
    • 1
  • K. P. Chong
    • 2
  • H. H. Einstein
    • 1
  1. 1.The Department of Civil EngineeringMassachusetts Institute of TechnologyCambridgeUSA
  2. 2.Department of Civil EngineeringUniversity of WyomingLaramieUSA

Personalised recommendations