Abstract
We present a finite element method which is well suited for mold-filling and solidification problems. These problems present unusual challenges in physical modeling, numerical methods and the efficient use of computational resources. High Reynolds number, transient, turbulent flows with free surfaces must be modeled in complex 3D geometries. One or two equation turbulence models with wall functions are used. The position of the flow front in the mold cavity is computed using a pseudo-concentration technique. Computations are presented for free surface turbulent fluid flow coupled to heat transfer and phase-change. The methodology has the robustness and cost effectiveness needed to tackle complex industrial applications.
Footnote
The work of D.Pelletier was supported in part by NSRC, FCAR and by the Air Force Office of Scientific Research under grant F49620–96–1–0329
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. Bramley and X. Wang. SPLIB:a library of iterative methods dor sparse linear systems, Technical Report 446, University of Indiana—Bloomington, Bloomington, IN 47405, 1995.
G. Comini, S. Del Guidice, R.W. Lewis, and O. C. Zienkiewicz. Finite element solution of non-linear heat conduction problems with special reference to phase change, Int. J. Numer. Meth. Engng, 8:613–624, 1974.
J.E. Dennis and R.B. Schnabel. Numerical methods for unconstrained optimization and nonlinear equations, Society for Industrial and Applied Mathematics, Philadelphis, 1996.
H. Van der Vorst. Bi-CGSTAB: A fast and smoothly converging variant of Bi-CG for the solution of nonsymmetric linear systems, SIAM Journal of Scientific and Statistical Computing, 13:631–644, 1992.
L. P. Franca and S. L. Frey. Stabilized finite element methods: II. ‘The incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, 99(2–3):209–233, 1992.
R Hendrickson and R. Leland. The CHACO user’s guide version 1.0, Technical Report SAND 93–2339, Sandia National Laboratories, Oct. 1993.
T. J. R. Hughes, L. P. Franca, and M. Balestra. A new finite element formulation for computational fluid dynamics: V. Circumventing the BabugkaBrezzi condition: A stable Petrov-Galerkin formulation of the Stokes problem accommodating equal-order interpolations, Computer Methods in Applied Mechanics and Engineering, 59:85–99, 1986.
T. J. R. Hughes, L. P. Franca, and G. M. Hulbert. A new finite element formulation for computational fluid dynamics: VII. ‘The Galerkin-LeastSquares method for advective-diffusive equations, Computer Methods in Applied Mechanics and Engineering, 73:173–189, 1989.
F. Ilinca. Méthodes d’éléments finis adaptatives pour les écoulements turbulents, PhD thesis, École Polytechnique of Montréal, March 1996.
F. Ilinca, J.-F. Hétu, and D. Pelletier. On stabilized finite element formulations for incompressible flows, In 13th AIAA Computational Fluid Dynamics Conference, Snowmass, Colorado, 1997. AIAA 97–1863.
F. Ilinca and D. Pelletier. Positivity preservation and adaptive solution for the k — E model of turbulence, In 35th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 1997. AIAA 97–0205.
F. Ilinca, D. Pelletier, and A. Garon. Positivity preserving formulations for adaptive solution of two-equation models of turbulence, In 27th AIAA Fluid Dynamics Conference, New Orleans, LA, June 1996. AIAA 96–2056.
G. Karypis and V. Kumar. A fast and high quality multilevel scheme for partitioning irregular graphs, Technical Report TR 95–035, Department of Computer Sciences, University of Minnesota, 1995. http://www.cs.umn.edu/~karypis/metis/metis.html
B. E. Launder and D. B. Spalding. Mathematical Models of Turbulence, Academic Press, London, 6th edition, 1972.
R.W. Lewis and P.M. Roberts. Finite element simulation of solidification problems. Appl. Sci. Research, 44:61–92, 1987.
K. Morgan, R.W. Lewis, and O. C. Zienkiewicz. An improved algorithm for heat conduction problems with phase change, Int. J. Numer. Meth. Engng, 12:1191–1195,1978.
D. Pelletier and F. Ilinca. Adaptive remeshing for the k — E model of turbulence, AMA Journal, 35(4):640–646, 1997.
Y. Saad. Iterative Methods for Sparse Linear Systems, PWS Publishing Company, Boston, MA, first edition, 1996.
B. Sirrell, M. Holliday, and J. Campbell. The benchmark test 1995, In M. Cross and J. Campbell, editors, 7th Conference on the Modeling of Casting,Welding and Advanced Solidification Processes 1995, London, September 1995. The Minerals, Metals and Materials Society.
M. Sussman, P. Smereka, and S. Osher. A level set approach for computing solutions to incompressible two-phase flow, J. Comp. Phys., 114:146–159, 1994.
T. E. Tezduyar, S. K. Aliabadi, M. Behr, and S. Mittal. Massively parralel finite element simulation of compressible and incompressible flows, Research Report 94–013, Army High Performance Computing Reserach Center, Minneapolis, Minnesota, 1994.
T. E. Tezduyar, R. Shih, S. Mittal, and S. E. Ray. Incompressible flow using stabilized bilinear and linear equal-order-interpolation velocity-pressure elements, Research Report UMSI 90/165, University of Minnesota/Supercomputer Institute, Minneapolis, 1990.
E. Thompson. Use of pseudo-concentration to follow creeping visous flows during transient analysis, Int. J. Numer. Meth. Fluids, 6:749–761, 1986.
O. C. Zienkiewicz, B. V. K. Satya Sai, K. Morgan, and R. Codina. Split, characteristic based semi-implicit algorithm for laminar/turbulent incompressible flows, International Journal for Numerical Methods in Fluids, 23:787–809, 1996.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media New York
About this chapter
Cite this chapter
Hétu, JF., Ilinca, F., Pelletier, D. (1998). Process Modeling and Optimization: Issues and Challenges. In: Borggaard, J., Burns, J., Cliff, E., Schreck, S. (eds) Computational Methods for Optimal Design and Control. Progress in Systems and Control Theory, vol 24. Birkhäuser, Boston, MA. https://doi.org/10.1007/978-1-4612-1780-0_14
Download citation
DOI: https://doi.org/10.1007/978-1-4612-1780-0_14
Publisher Name: Birkhäuser, Boston, MA
Print ISBN: 978-1-4612-7279-3
Online ISBN: 978-1-4612-1780-0
eBook Packages: Springer Book Archive