Part of the Power Systems book series (POWSYS)


This chapter presents the main issues discussed in the book on digital signal processing in power electronics control circuits. These issues are related to the discretization of continuous signals and conversion of discrete signals into continuous signals, and concerning such aspects as the number of bits and the processing speed. Also described are the basic requirements for digital control of systems. To illustrate the problems under consideration active power filters and a digital class D amplifier have been selected. In this chapter, problems are set to be solved for selected applications. This chapter also describes the notational symbols and marks used in the book. Finally, the content of the remaining chapters is described.


Alternate Current Pulse Width Modulation Digital Signal Processor Control Circuit Active Power Filter 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    Akagi H, Kanazawa Y, Nabae A (1983) Generalized theory of instantaneous reactive power and its applications. Trans IEE Japan 103(7):483–490Google Scholar
  2. 2.
    Akagi H, Kanazawa Y, Nabae A (1984) Instantaneous reactive power compensators comprising switching devices without energy storage components. IEEE Trans Ind Appl 1A–20(3):625–630CrossRefGoogle Scholar
  3. 3.
    Akagi H (1996) New trends in active filters for power conditioning. IEEE Trans Ind Appl 32(6):1312–1322CrossRefGoogle Scholar
  4. 4.
    Akagi H, Watanabe EH, Aredes M (2007) Instantaneous power theory and applications to power conditioning. Wiley, New JerseyGoogle Scholar
  5. 5.
    Aredes M (1996) Active power line conditioners. Ph.D. thesis, Technische Universitat Berlin.Google Scholar
  6. 6.
    Astrom KJ, Wittenmark B (1997) Computer-controlled system. Theory and design. Prentice Hall, Inc., New JerseyGoogle Scholar
  7. 7.
    Attia J O (1999) Electronics and circuit analysis using Matlab. CRC Press, Boca RatonGoogle Scholar
  8. 8.
    Baxandall PF (1959) Transistor sine-wave LC oscillators. In: ICTASD–IRE, pp 748–759Google Scholar
  9. 9.
    Benysek G, Pasko M (eds) (2012) Power theories for improved power quality. Springer-Verlag, LondonGoogle Scholar
  10. 10.
    Bollen MHJ, Gu IYH, Santoso S, McGranaghan MF, Crossley PA, Ribeiro MV, Ribeiro PF (2009) Bridging the gap between signal and power. IEEE Signal Process Mag 26(4):12–31Google Scholar
  11. 11.
    Bose BK (2006) Power electronics and motor drives: advances and trends. Academic Press, AmsterdamGoogle Scholar
  12. 12.
    Buso S, Mattavelli P (2006) Digital control in power electronics. Morgan & Claypool, San RafaelGoogle Scholar
  13. 13.
    Chen WK (ed) (1995) The circuits and filters handbook. IEEE Press, Boca RatonGoogle Scholar
  14. 14.
    Crochiere RE, Rabiner LR (1983) Multirate digital signal processing. Prentice Hall Inc., Englewood CliffsGoogle Scholar
  15. 15.
    Dabrowski A (ed) (1997) Digital signal processing using digital signal processors. Wydawnictwo Politechniki Poznanskiej, Poznan (In Polish)Google Scholar
  16. 16.
    Duncan B (1996) High performance audio power amplifier for music performance and reproduction. Newnes, OxfordGoogle Scholar
  17. 17.
    Erickson RW, Maksimovic D (2004) Fundamentals of power electronics. Kluwer Academic Publishers, BostonGoogle Scholar
  18. 18.
    Fettweis A (1971) Digital filter structures related to classical filter networks. AEU, Band 25. Heft 2:79–89Google Scholar
  19. 19.
    Fettweis A (1986) Wave digital filters: theory and practice. Proc IEEE 74(2):270–327CrossRefGoogle Scholar
  20. 20.
    Flige N (1994) Multirate digital signal processing. Wiley, New YorkGoogle Scholar
  21. 21.
    Gazsi L (1985) Explicit formulas for lattice wave digital filters. IEEE Trans Circuits Syst 32(1):68–88CrossRefGoogle Scholar
  22. 22.
    Goldberg JM, Sandler MB (1994) New high accuracy pulse width modulation based digital-to-analogue convertor/power amplifier. IEE Proc Circuits Dev Syst 141(4):315–324CrossRefGoogle Scholar
  23. 23.
    Gyugyi L, Strycula EC (1976) Active AC power filters. In: Proceedings of IEEE industry applications on annual meeting, pp 529–535Google Scholar
  24. 24.
    IEEE Standard for terminology and test methods for analog-to-digital converters (2011) IEEE Standard. IEEE, Technical report, pp 1241–2010Google Scholar
  25. 25.
    Kazimierkowski M, Malesani L (1998) Current control techniques for three-phase voltage-source converters: a survey. IEEE Trans Ind Electron 45(5):691–703Google Scholar
  26. 26.
    Kazmierkowski M P, Kishnan R, Blaabjerg F (2002) Control in power electronics. Academic Press, San DiegoGoogle Scholar
  27. 27.
    Kester W (2004) Analog-digital conversion. Analog Devices Inc., LondonGoogle Scholar
  28. 28.
    Kester W (2005) The data conversion handbook. Newnes, New YorkGoogle Scholar
  29. 29.
    Lyons R (2004) Understanding digital signal processing, 2nd edn. Prentice Hall, New JerseyGoogle Scholar
  30. 30.
    Mitra S (2006) Digital signal processing: a computer-based approach. McGraw-Hill, New YorkGoogle Scholar
  31. 31.
    Mohan N, Undeland TM, Robbins WP (1995) Power electronics, converters, applications and design. Wiley, New JerseyGoogle Scholar
  32. 32.
    Nielsen K (1998) Audio power amplifier techniques with energy efficient power conversion. PhD thesis, Departament of Applied Electronics, Technical University of Denmark.Google Scholar
  33. 33.
    Oppenheim AV, Schafer RW (1999) Discrete-time signal processing. Prentice Hall, New JerseyGoogle Scholar
  34. 34.
    Orfanidis S J (2010) Introduction to signal processing. Prentice Hall Inc., Upper Saddle RiverGoogle Scholar
  35. 35.
    Oshana R (2005) DSP software development techniques for embedded and real-time systems. Newnes, BurlingtonGoogle Scholar
  36. 36.
    Owen M (2007) Practical signal processing. Cambridge University Press, CambridgeGoogle Scholar
  37. 37.
    Proakis JG, Manolakis DM (1996) Digital signal processing, principles, algorithms, and application. Prentice Hall Inc., Upper Saddle RiverGoogle Scholar
  38. 38.
    Rabiner LR, Gold B (1975) Theory and application of digital signal processing. Prentice Hall Inc., Englewood CliffsGoogle Scholar
  39. 39.
    Santi S, Ballardini M, Rovatti R, Setti G (2005) The effects of digital implementation on ZePoC codec. In: Proceedings of the IEEE conference on ECCTD III:173–176Google Scholar
  40. 40.
    Self D (2002) Audio power amplifier design handbook. Newnes, OxfordGoogle Scholar
  41. 41.
    Slone G R (1999) High-power audio amplifier construction manual. McGraw-Hill, TorontoGoogle Scholar
  42. 42.
    Sozański K (1999) Design and research of digital filters banks using digital signal processors. Ph.D. thesis, Technical University of Poznan (in Polish)Google Scholar
  43. 43.
    Sozanski K (2004) Harmonic compensation using the sliding DFT algorithm. In: Proceedings of the 35rd annual IEEE power electronics specialists conference, PESC 2004, AachenGoogle Scholar
  44. 44.
    Sozanski K (2007) The shunt active power filter with better dynamic performance. In: Proceedings of the Power Tech 2007 Conference, LausanneGoogle Scholar
  45. 45.
    Sozanski K (2008) Improved shunt active power filters. Przeglad Elektrotechniczny (Electr Rev) 45(11):290–294Google Scholar
  46. 46.
    Sozanski K (2010) Digital realization of a click modulator for an audio power amplifier. Przeglad Elektrotechniczny (Electr Rev) 2010(2):353–357Google Scholar
  47. 47.
    Sozanski K (2012) Realization of a digital control algorithm. In: Benysek G, Pasko M (eds) Power theories for improved power quality. Springer-Verlag, London, pp 117–168Google Scholar
  48. 48.
    Sozanski K, Strzelecki R, Fedyczak Z (2001) Digital control circuit for class-D audio power amplifier. In: Proceedings of the IEEE 32nd annual power electronics specialists conference, PESC 2001, pp 1245–1250Google Scholar
  49. 49.
    Streitenberger M, Bresch H, Mathis W (2000) Theory and implementation of a new type of digital power amplifiers for audio applications. In: Proceedings of the IEEE conference on ICAS 2000, vol I, pp 511–514Google Scholar
  50. 50.
    Streitenberger M, Felgenhauer F, Bresch H, Mathis W (2002) Class-D audio amplifiers with separated baseband for low-power mobile applications. In: Proceedings of the IEEE Conference on ICCSC’02, pp 186–189Google Scholar
  51. 51.
    Strzelecki R, Fedyczak Z, Sozanski K, Rusinski J (2000) Active power filter EFA1, technical report. Instytut Elektrotechniki Przemyslowej, Politechnika Zielonogorska (in Polish)Google Scholar
  52. 52.
    Tantaratana S (1995) Design of IIR filters. In: Chen WK (ed) (1995) The circuits and filters handbook. IEEE Press, Boca RatonGoogle Scholar
  53. 53.
    Trzynadlowski A (2010) Introduction to modern power electronics. Wiley-Interscience, New JerseyGoogle Scholar
  54. 54.
    Vaidyanathan PP (1992) Multirate systems and filter banks. Prentice Hall Inc., Englewood CliffsGoogle Scholar
  55. 55.
    Venezuela RA, Constantindes AG (1982) Digital signal processing schemes for efficient interpolation and decimation. IEE Proc Part G 130(6):225–235Google Scholar
  56. 56.
    Verona J (2001) Power digital-to-analog conversion using sigma-delta and pulse width modulations, ECE1371 Analog Electronics II, ECE University of Toronto (II):1–14Google Scholar
  57. 57.
    Wanhammar L (1999) DSP integrated circuit. Academic Press, New YorkGoogle Scholar
  58. 58.
    Williamson D (1991) Digital control and implementation. Prentice Hall Inc., Englewood CliffsGoogle Scholar
  59. 59.
    Zielinski T (2005) Digital signal processing: from theory to application. Wydawnictwo Komunikacji i Lacznosci, Warsaw (in Polish)Google Scholar

Copyright information

© Springer-Verlag London 2013

Authors and Affiliations

  1. 1.Institute of Electrical EngineeringUniversity of Zielona GóraZielona GóraPoland

Personalised recommendations