Abstract
In this chapter, the computational fluid dynamics (CFD) technique is described for accurate simulation of fluid and heat flow in sustainable technologies and buildings. The technique is demonstrated using three examples; one for each of three different types of flow: (1) steady state in wind- and buoyancy-driven natural ventilation; (2) compressible flow in a solar-powered ejector for cooling; and (3) transient state flow in a horizontal-coupled ground source heat pump for heating/cooling of buildings. When naturally ventilating a building, a double skin façade can enhance the buoyancy effect, but the impact of wind is less certain compared to buoyancy; not only in terms of its unpredictable nature, but also its interactions with buoyancy. The performance of a solar-powered ejector is influenced by the nozzle position, and the ideal position for the nozzle outlet is near the diffuser entrance. The heat extraction/injection capacity of a ground-coupled (horizontal) heat exchanger for long-term operation is lower than that used in current design guidance for ground source heat pumps. The technique can also be used for optimization and performance assessment of other technologies and solutions for sustainable building design. Learning Outcomes: on successful completion of this chapter, readers will be able to: (1) grasp the underlying principles of CFD and its governing mathematical models and equations, (2) understand the type of applications of CFD and how findings can influence sustainable building design and technology, (3) appreciate the types of conditional requirements that are necessary in order to conduct a simulation, and (4) have a limited knowledge about natural ventilation in offices, ejector refrigeration, and ground source heat pumps (GSHP). This chapter explains the basics of CFD and illustrates its potentials for sustainable building design. The partial differential equations for fluid and heat flow and the solution method are introduced, followed by three examples for simulations of natural ventilation, solar cooling, and ground source heating of buildings. Emphasis is placed on the accuracy of simulation from model setup to solution convergence.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Allocca C, Chen QY, Glicksman LR (2003) Design analysis of single-sided natural ventilation. Energy Build 35:785–795
CIBSE (2006) Guide A: environmental design. Chartered Institution of Building Services Engineers, London
Cook MJ, Ji Y, Hunt GR (2003) CFD modelling of natural ventilation: combined wind and buoyancy forces. Int J Vent 1(3):169–179
EST (2004) Domestic ground source heat pump: design and installation of closed-loop systems. Energy Saving Trust (EST), UK
FLUENT (2005) 6.2 Ansys Inc. Canonsburg, Pennsylvania, USA
Gan G (1998) Prediction of turbulent buoyant flow using an RNG k-ε model. Numer Heat Trans Part A Appl 33(2):169–189
Gan G (2009) Numerical determination of adequate air gaps for building-integrated photovoltaics. Sol Energy 83(8):253–1273
Gan G (2010a) Impact of computational domain on the prediction of buoyancy-driven ventilation cooling. Build Environ 45(5):1173–1183
Gan G (2010b) Interaction between wind and buoyancy effects in natural ventilation of buildings. Open Constr Build Technol 4:134–145
Gan G (2011) Prediction of heat transfer and air flow in solar heated ventilation cavities. In: Murphy AD (ed) Computational fluid dynamics: theory, analysis and applications. Nova Science, New York http://www.novapublishers.com/catalog/product_info.php?products_id=29991 Accessed 3 Mar 2012
Riffat SB, Gan G, Smith S (1996) Computational fluid dynamics applied to ejector heat pumps. Appl Therm Eng 16(4):291–297
Wu Y, Gan G, Verhoef A, Vidale PL, Gonzalez RG (2010) Experimental measurement and numerical simulation of horizontal-coupled slinky ground source heat exchangers. Appl Therm Eng 30(16):2574–2583
Yakhot V, Orzsag SA (1986) Renormalization group analysis of turbulence: I Basic theory. J Sci Comput 1(1):1–51
Acknowledgments
The work on the ground-coupled heat exchanger is funded by the UK Natural Environment Research Council (Grant NE/F017715/1).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Gan, G. (2013). CFD Simulation for Sustainable Building Design. In: Yao, R. (eds) Design and Management of Sustainable Built Environments. Springer, London. https://doi.org/10.1007/978-1-4471-4781-7_13
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4781-7_13
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-4780-0
Online ISBN: 978-1-4471-4781-7
eBook Packages: EngineeringEngineering (R0)