Representation, Presentation and Visualization of Uncertainty

  • Reiner Anderl
  • Michael Maurer
  • Thomas Rollmann
  • André Sprenger
Conference paper

Abstract

Uncertainty in the design process impacts performance parameters of products which are a major problem in the development of highly optimized load bearing systems. Typically, the information flow in the design process is a one way process from the design to subsequent product life cycle phases. Uncertainty about product properties leads to less economic and less safe products. In this paper an innovative approach to enable modeling and communication of uncertain properties along the product life cycle and the sophisticated presentation and visualization of these uncertainties is proposed. This approach is based on a three layer concept including a representation layer, a presentation layer and a visualization layer. The approach enables the visualization of a broad spectrum of process and product properties with respect to different specifications of each property e.g. single values, intervals, fuzziness and stochastic measures which may occur along the product life cycle.

Keywords

Assure 

Notes

Acknowledgments

We like to thank the German Research Foundation (Deutsche Forschungsgemeinschaft—DFG) for funding this project within the Collaborative Research Centre (CRC) 805.

References

  1. 1.
    Hanselka H, Platz R (2010) Ansätze und Maßnahmen zur Beherrschung von Unsicherheit in lasttragenden Systemen des Maschinenbaus. In: Konstruktion 11/12Google Scholar
  2. 2.
    Wanderbäck F, Söderberg R, Carlson JS, Wahlborg P et al. (2009) Variation feedback and visualization of geometrical inspection data. Proceedings of the ASME 2009 international design engineering technical conferences and computers and information in engineering conference (IDETC/CIE), San Diego, DECT2009-86759Google Scholar
  3. 3.
    ISO-10303-1 (1994) Overview and fundamental principles, ISOGoogle Scholar
  4. 4.
    Mecke K, Sprenger A, Weitzmann O, Anderl R (2010) Ontology-based system for supporting the containment of uncertainty in the product life cycle. In: TMCE, faculty of industrial design engineering, Delft University of technology, eurotech-verlag, Ancona, pp. 1259–1272Google Scholar
  5. 5.
    Mecke K, Sprenger A, Mosch L, Anderl R (2010) Beherrschung von Unsicherheit von lasttragenden Systemen im Maschinenbau durch ontologie-basierte Informationsverarbeitung und Visualisierungstechnik, KT 2010—MagdeburgGoogle Scholar
  6. 6.
    Mosch L, Sprenger A, Anderl R (2011) Consideration of uncertainty in virtual product design, proceedings of the ASME 2011 international design engineering technical conferences and computers and information in engineering conference (IDETC/CIE), Washington DC, DECT2011-47278Google Scholar
  7. 7.
    Ahmed S, Kim S, Wallace KM (2007) A methodology for creating ontologies for engineering design. J Comput Inf Sci Eng 2:132–140CrossRefGoogle Scholar
  8. 8.
    Kim KY, Manley DG, Yang H (2006) Ontology-based assembly design and information sharing for collaborative product development. Comput-Aided Des 12:1233–1250CrossRefGoogle Scholar
  9. 9.
    Patil L, Dutta D, Sriram R (2005) Ontology-based exchange of product data semantics. IEEE Trans on Autom Sci Eng 2(3)Google Scholar
  10. 10.
    Williams M, Cornford D, Bastin L, Ingram B, R, (2008) UncertML: an XML schema for exchanging uncertainty. IN: GIS research UK 16th annual conference GISRUK 2008, Manchester (UK), ID: 11091Google Scholar
  11. 11.
    Engelhardt R, Koenen J, Enss G, Sichau A, Platz R, Kloberdanz H, Birkhofer H, Hanselka H (2010) A model to categorise uncertainty in load-carrying systems, MMEP 2010—international conference on modelling and management of engineering processes, Cambirdge, pp. 53–64Google Scholar
  12. 12.
    Sprenger A, Mosch L, Anderl R (2011) Representation of uncertainty in distributed product development, 17th European concurrent engineering conference, London, pp. 83–90Google Scholar
  13. 13.
    Sprenger A, Haydn M, Ondoua S, Mosch L, Anderl R (2011) Ontology-based information model for the exchange of uncertainty in load carrying structures. Proceedings of the ICUME2011, Darmstadt, pp. 55–66Google Scholar
  14. 14.
    Foley JD, Dam A van, Feiner S, Hughes J (1999) Computer graphics: principles and practice, 2nd edn. Addison-Wesley, reading, massGoogle Scholar
  15. 15.
    Johnson CR, Sanderson AR (2003) A next step: visualization errors and uncertainty. In: Rhyne TM (ed) IEEE computer graphics and applications, September/October IEEE computer societyGoogle Scholar
  16. 16.
    Tufte ER (2001) The visual display of quantitative information. 2nd edn. Graphics Press, CT USAGoogle Scholar
  17. 17.
    Ware C (2004) Information visualization: perception for design, 2nd edn. Morgan Kaufmann, San FranciscoGoogle Scholar

Copyright information

© Springer-Verlag London 2013

Authors and Affiliations

  • Reiner Anderl
    • 1
  • Michael Maurer
    • 1
  • Thomas Rollmann
    • 1
  • André Sprenger
    • 1
  1. 1.Department of Computer Integrated Design (DiK), TU DarmstadtDarmstadtGermany

Personalised recommendations