Cutting Mechanics and Analytical Modeling

Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

Prior to the description of the most important modeling methods and their features, it would be helpful to introduce some questions that may come to mind of those who want to use modeling, and attempt to give answers. Although some answers are already given in the previous chapter, a more elaborated approach is presented in this section. The questions raised apply to all kinds of modeling; the answers mostly concern FEM, without excluding all the other methods. In the next chapter some more questions and answers, this time solely for FEM, will be presented.

References

  1. 1.
    Grzesik W (2008) Advanced machining processes of metallic materials. Theory modelling and applications. Elsevier, OxfordGoogle Scholar
  2. 2.
    Shaw MC (1984) Metal cutting principles. Oxford University Press, OxfordGoogle Scholar
  3. 3.
    van Luttervelt CA, Childs THC, Jawahir IS, Klocke F, Venuvinod PK (1998) Present situation and future trends in modeling of machining operations. In: Progress report of the CIRP working group “modeling and machining operations”. Annals of the CIRP, vol 47/2, pp. 587–626Google Scholar
  4. 4.
    Stephenson DA, Agapiou JS (2006) Metal cutting theory and practice, 2nd edn. CRC Press, FLGoogle Scholar
  5. 5.
    Zorev NN (1966) Metal cutting mechanics. Pergamon Press, OxfordGoogle Scholar
  6. 6.
    Finnie I (1956) Review of the metal cutting analyses of the past hundred years. Mech Eng 78(8):715–721Google Scholar
  7. 7.
    Cocquilhat M (1851) Expériences sur la Resistance Utile Produite dans le Forage. Annales Travaux Publics en Belgique 10:199–215Google Scholar
  8. 8.
    Time I (1870) Resistance of metals and wood to cutting (in Russian). Dermacow Press House, St. PetersbourgGoogle Scholar
  9. 9.
    Astakhov VP (1999) Metal cutting mechanics. CRC Press, FLGoogle Scholar
  10. 10.
    Usachev YG (1915) Phenomena occurring during the cutting of metals—review of the studies completed (in Russian). Izv. Petrogradskogo Politechnicheskogo Inst., XXIII(1)Google Scholar
  11. 11.
    Tresca H (1873) Mémoires sur le Rabotage des Métaux. Bulletin de la Société d’ Encouragement pour l’ Industrie Nationale, 585–607Google Scholar
  12. 12.
    Zvorykin KA (1896) On the force and energy necessary to separate the chip from the workpiece (in Russian). Vetnik Promyslennostie, 123Google Scholar
  13. 13.
    Mallock A (1881–1882) The action of cutting tools. Proc Roy Soc Lond 33:127–139Google Scholar
  14. 14.
    Ernst H, Merchant ME (1941) Chip formation, friction and high quality machined surfaces. Surface treatment of metals. Am Soc Met 29:299–378Google Scholar
  15. 15.
    Childs THC, Maekawa K, Obikawa T, Yamane Y (2000) Metal machining: theory and applications. Elsevier, MAGoogle Scholar
  16. 16.
    Bhattacharyya A (1994) Metal cutting theory and practice. New Central Book Agency Ltd, KolkataGoogle Scholar
  17. 17.
    Oxley PLB (1989) The mechanics of machining: an analytical approach to assessing machinability. Ellis Horwood, ChichesterGoogle Scholar
  18. 18.
    Dixit PM, Dixit US (2008) Modeling of metal forming and machining processes by finite element and soft computing methods. Springer, LondonGoogle Scholar
  19. 19.
    Piispanen V (1937) Lastunmuodostumisen Teoriaa. Teknillinen Aikakauslehti 27:315–322Google Scholar
  20. 20.
    Piispanen V (1948) Theory of formation of metal chips. J Appl Phys 19:876–881CrossRefGoogle Scholar
  21. 21.
    Merchant ME (1945) Mechanics of the metal cutting process II. Plasticity conditions in orthogonal cutting. J Appl Phys 16(6):318–324CrossRefGoogle Scholar
  22. 22.
    Lee EH, Shaffer BW (1951) The theory of plasticity applied to a problem of machining. Trans ASME—J Appl Mech 18:405–413Google Scholar
  23. 23.
    Kudo H (1965) Some new slip-line solutions for two-dimensional steady-state machining. Int J Mech Sci 7:43–55CrossRefGoogle Scholar
  24. 24.
    Dewhurst P (1978) On the non-uniqueness of the machining process. Proc Roy Soc Lond A360:587–610CrossRefGoogle Scholar
  25. 25.
    Astakhov VP (2005) On the inadequacy of the single-shear plane model of chip formation. Int J Mech Sci 47:1649–1672MATHCrossRefGoogle Scholar
  26. 26.
    Shaw MC, Cook NH, Smith PA (1952) The mechanics of three-dimensional cutting operations. Trans ASME 74:1055–1064Google Scholar
  27. 27.
    Morcos WA (1980) A slip line field solution of the free continuous cutting problem in conditions of light friction at chip-tool interface. Trans ASME—J Eng Ind 102:310–314CrossRefGoogle Scholar
  28. 28.
    Usui E, Hirota A, Masuko M (1978) Analytical prediction of three dimensional cutting process. Part 1. Basic cutting model and energy approach. Trans ASME—J Eng Ind 100:222–228CrossRefGoogle Scholar
  29. 29.
    Usui E, Hirota A (1978) Analytical prediction of three dimensional cutting process. Part 2. Chip formation and cutting force with conventional single-point tool. Trans ASME—J Eng Ind 100:229–235CrossRefGoogle Scholar
  30. 30.
    Usui E, Shirakashi T, Kitagawa T (1978) Analytical prediction of three dimensional cutting process. Part 3. Cutting temperature and crater wear of carbide tool. Trans ASME—J Eng Ind 100:236–243CrossRefGoogle Scholar
  31. 31.
    Ehmann KF, Kapoor SG, DeVor RE, Lazoglu I (1997) Machining process modeling: a review. Trans ASME—J Manuf Sci Eng 119:655–663CrossRefGoogle Scholar

Copyright information

© The Author(s) 2013

Authors and Affiliations

  1. 1.Laboratory of Manufacturing TechnologyNational Technical University of AthensAthensGreece

Personalised recommendations