Abstract
Multifunctional structures are pointed out as a future breakthrough technology for Unmanned Air Vehicle (UAV) design. These structures can perform tasks additional to their primary functions. Based on the concept of vibration-based energy harvesting, the structure (lifting surfaces) of a UAV can perform the additional function of providing electrical energy by converting aeroelastic vibrations to electricity. In this paper, frequency-domain piezo-aero-elastic modeling of a cantilevered plate-like wing with embedded piezoceramics is presented for energy harvesting. The electromechanical finite-element plate model is based on the Kirchhoff assumptions and a resistive load is considered in the external circuit. The subsonic unsteady aerodynamic model is accomplished with the doublet lattice method. The electromechanical and the aerodynamic models are combined to obtain the piezo-aero-elastic equations, which are solved using a modified P-K scheme. This way the evolution of the aerodynamic damping and the frequency of each mode is obtained with changing airflow speeds for a given load resistance. Piezo-aero-elastically coupled frequency response functions (voltage, current and electrical power as well relative tip motion) are defined for a given airflow speed and load resistance. Hence the piezo-aero-elastic evolution can be investigated under several different conditions. A procedure is also presented in order to obtain the optimum load resistance (for maximum power and for maximum damping) for a given airflow speed.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Langelaan, J.W., 2007, “Long Distance/Duration Trajectory Optimization for Small UAVs” AIAA Guidance, Navigation and Control Conference and Exhibit.
Anton, S.R. and Inman D.J., “Vibration energy harvesting for unmanned air vehicles,” Proceedings of SPIE 6928, March 10–13, San Diego, CA (2008).
Magoteaux, K.C., Sanders, B. and Sodano, H.A., “Investigation of energy harvesting small unmanned air vehicle” Proceedings of SPIE 6928, March 10–13, San Diego, CA (2008).
De Marqui, Jr., C., Erturk, A., and Inman, D.J. 2009 Effect of Segmented Electrodes on Piezo-Elastic and Piezo-Aero-Elastic Responses of Generator Plates, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, 20–24 September 2009.
Erturk, A., Renno, J.M. and Inman, D.J., “Modeling of piezoelectric energy harvesting from an L-shaped beammass structure with an application to UAVs,” Journal of Intelligent Material Systems and Structures 20, 529–544 (2009).
Pines, D.J. and Bohorquez, F., 2006, “Challenges Facing Future Micro-Air-Vehicle Development,” Journal of Aircraft, 43, pp. 290–305.
Sodano, H.A., Inman, D.J. and Park, G., 2004, “A review of power harvesting from vibration using piezoelectric materials,” The Shock and Vibration Digest, 36, pp. 197–205.
Priya, S., 2007, “Advances in energy harvesting using low profile piezoelectric transducers,” Journal of Electroceramics, 19, pp. 167–184.
Anton, S.R. and Sodano, H.A., 2007, “A review of power harvesting using piezoelectric materials 2003–2006,” Smart Materials and Structures, 16, R1-R21.
Cook-Chennault, K.A., Thambi, N. and Sastry, A.M., 2008, “Powering MEMS portable devices – a review of non-regenerative and regenerative power supply systems with emphasis on piezoelectric energy harvesting systems,” Smart Materials and Structures, 17, 043001.
Anton, S.R., Erturk, A., Kong, N., Ha, D.S. and Inman, D.J. 2009, Self-charging structures using piezoceramics and thin-filmbatteries, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, 20–24 September 2009.
De Marqui, Jr., C., Erturk, A., and Inman, D.J. 2009 Piezo-Aero-Elastically Coupled Modeling and Analysis of Electrical Power Generation and Shunt Damping for a Cantilever Plate, Proceedings of the 17th International Conference on Composite Materials, Edinburgh, UK, 27–31 July 2009.
De Marqui Junior, C., Erturk, A. and Inman, D.J., 2009, “An electromechanical finite element model for piezoelectric energy harvester plates,” Journal of Sound and Vibration, V. 327, pp 9–25.
Albano, E. and Rodden, W.P., 1969, A doublet-lattice method for calculating lift distributions on oscillating surfaces in subsonic flow. AIAA Journal 7, pp. 279–285
Erturk, A. and Inman, D.J., 2009, “An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations,” Smart Materials and Structures, 18, 025009.
Wang, Q.M. and Cross, L.E., 1999, “Constitutive equations of symmetrical triple layer piezoelectric benders,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 46, pp. 1343–51.
Harder, R. L.; Desmarais, R. N., 1972, Interpolation using surface splines, Journal of Aircraft, V. 9, pp. 189–191.
Hassig, H. J.,''An approximate true damping solution of the flutter equation by determinant iteration'' Journal of Aircraft, Vol.8, no.11 (885–889), November, 1971, doi: 10.2514/3.44311
Erturk A and Inman D J 2009 Issues in Mathematical Modeling of Piezoelectric Energy Harvesters Smart Materials and Structures 17 065016.
/http://www.piezo.com/prodsheet1sq5A.htmlS, Accessed December 2008.
/http://www.efunda.com/materials/piezo/material_dataS, Accessed December 2008.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Vieira, W.G.R., De Marqui Junior, C., Erturk, A., Inman, D.J. (2011). Frequency Domain Solution of a Piezo-aero-elastic Wing for Energy Harvesting. In: Proulx, T. (eds) Structural Dynamics and Renewable Energy, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9716-6_23
Download citation
DOI: https://doi.org/10.1007/978-1-4419-9716-6_23
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-9715-9
Online ISBN: 978-1-4419-9716-6
eBook Packages: EngineeringEngineering (R0)