Skip to main content
SpringerLink
Log in

A Review of Gearbox Condition Monitoring Based on vibration Analysis Techniques Diagnostics and Prognostics

  • Conference paper
  • First Online:
Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5

Abstract

This paper provides a review of the literature on condition monitoring of a gearbox. The progress and changes over the past 30 years in failure detection techniques of rotating machinery including helicopter transmission are reviewed. Vibration Analysis techniques, indicators and parameters used in condition monitoring are arranged in a historical perspective. The use of vibration-based analysis damage detection techniques is classified and discussed in details. The capability of each technique to sense failure and damage in rotary equipments is addressed. These diagnostics techniques in gearbox condition monitoring are organized and regrouped in this review paper in a better approach so they can be easily recognized.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 329.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Similar content being viewed by others

References

  1. Zakrajsek, J.J.: “An Investigation of Gear Mesh Failure Prediction Techniques,” NASA TM-102340, AVSCOM TM 89-C-005, November 1989.

    Google Scholar 

  2. Lebold, M.; McClintic, K.; Campbell, R.; Byington, C.; Maynard, K.: “Review of Vibration Analysis Methods for Gearbox Diagnostics and Prognostics,” Proceeding of the 54th Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, pp. 623-634, May 1-4, 2000.

    Google Scholar 

  3. Decker, Harry J.: “Crack Detection for Aerospace Quality Spur Gears,” NASA TM-2002-211492, ARL-TR-2682, Prepared for the 58th Annual Forum and Technology Display, by the American Helicopter Society, Montreal, Canada, June 11-13, 2002.

    Google Scholar 

  4. Decker, H.J.; and Lewicki, D.G.: “Spiral Bevel Pinion Crack Detection in a Helicopter Gearbox,” in Proceeding of the American Helicopter Society 59th Annual Forum, Phoenix, AZ, pp. 1222-1232, 2003.

    Google Scholar 

  5. Samuel, Paul D.; and Pines, DarryII J.: “A Review of Vibration-Based Techniques for Helicopter Transmission Diagnostics,” Journal of Sound and Vibration. vol. 282, no 1-2, pp. 475-508, April 6, 2005.

    Article  Google Scholar 

  6. Swansson, N.S.: “Application of Vibration Signal Analysis Techniques to Signal Monitoring,” in: Conference on Friction and Wear in Engineering, Institute of Engineering, Barton, Australia, pp. 262-267, 1980.

    Google Scholar 

  7. Zakrajsek, J.J.: NASA Technical Memorandum 102340, Lewis Research Center, Cleveland, OH.

    Google Scholar 

  8. Miller,; Irwin,; and Freund, J.E.: “Probability and Statistics for Engineering,” 3rd Edition, Prentice-Hall, Inc., New Jersey, p.74, 1985.

    Google Scholar 

  9. Ma, J.: “Energy Operator and Other Demodulation Approaches to Gear Defect Detection,” Proceeding of 49th Meeting of the Society of Mechanical Failure Prevention Technology, Virginia Beach, VA, pp. 127-140, April 1995.

    Google Scholar 

  10. Spectra Quest Tech Note,: “Analyzing Gearbox Degradation Using Time-Frequency Signature Analysis,” March 2006.

    Google Scholar 

  11. Spectra Quest Tech Note,: “Rotating Machinery Fault Diagnosis Techniques-Enveloping and Cepstrum Analyses,” October 2006.

    Google Scholar 

  12. Wang, Wilson Q.: “Rotary Machinery Health Condition Monitoring Fault Diagnosis and Prognosis,” Thesis, University of Waterloo, Waterloo, Ontario, Canada, 2002.

    Google Scholar 

  13. McFadden, P.: “A Technique for Calculating the Time Domain Averages of Vibration of the Individual Planet Gear and the Sun Gear in an Epicyclic Gearbox,” Journal of Sound and Vibration, vol. 144, no.1, pp. 163-172, 1991.

    Article  MathSciNet  Google Scholar 

  14. Stewart, R.T.: “Some Useful Analysis Techniques for Gearbox Diagnostics,” Technical Report MHM/R/10/77, Machine Health Monitoring Group, Institute of Sound and Vibration Research, University of Southampton, July 1977.

    Google Scholar 

  15. Zakrajsek, J.J.; Townsend, D.P.; and Decker, H.J.: “An Analysis of Gear Fault Detection Methods as Applied to Pitting Fatigue Failure Data,” Technical Report NASA TM-105950, A VSCOM TR-92-C-035, NASA and the US Army Aviation System Command, Prepared for the 47th Meeting of The System Engineering Approach to Mechanical Failure Prevention, January 1993.

    Google Scholar 

  16. Decker, H.J.; Handschuh, R.F.; and Zakrajsek, J.J.: “ An Enhancement to the NA4 Gear Vibration Diagnostic Parameter,” Technical Report NASA TM-106553, ARL-TR-398, NASA and the US Army Research Laboratory, July 1994.

    Google Scholar 

  17. Martin, H.R.: “Statistical Moment Analysis As a Mean of surface Damage Detection,” Proceeding of the 7th International Model Analysis Conference, Society of Experimental Mechanics, Schenectady, NY, pp. 1016-1021, 1989.

    Google Scholar 

  18. Zakrajsek, J.J.: “A Review of transmission Research at NASA Lewis Research Center,” Technical Report NASA TM-106746, ARL-TR-599, NASA and the US Army Research Laboratory, December 1994.

    Google Scholar 

  19. Zakrajsek, J.J.; Handschuh, R.F.; Lewicki, D.G.; and Decker, H.J.: “Detecting gear Tooth fracture in a High Contact Ratio Face Gear Mesh,” Proceeding of the 49th Meeting of the Mechanical Failure Prevention Group, Virginia Beach, VA, April 18-20, 1995.

    Google Scholar 

  20. Zakrajsek, J.J.: “Transmission Diagnostics Research at NASA Lewis Research Laboratory,” Technical Report NASA TM-106901, ARL-TR-748, NASA and the US Army Research Laboratory, April 1994.

    Google Scholar 

  21. Forrester, B.D.: “Use of the Wigner-Ville Distribution in Helicopter Transmission Fault Detection,” Proceeding of the Australian Symposium on Signal Processing and Applications-ASSP 89, Adelaide, Australia, pp.78-82, 1989.

    Google Scholar 

  22. McFadden, P.D.: “Detecting Fatigue Crack in Gears by Amplitude and Phase Demodulation of the Meshing Vibration,” Journal of Vibration, Acoustic, Stress, and Reliability in Design, vol. 108, pp. 165-170, 1986.

    Article  Google Scholar 

  23. Brennan, M.; Chen, M.H.; and Reynolds, A.G.: “Use of Vibration Measurements to Detect Local Tooth Defects in Gears,” Journal of Sound and Vibration, vol. 31, pp. 12-17, November 1997.

    Google Scholar 

  24. Larder, B.: “An Analysis of HUMS Vibration Diagnostics Capabilities,” Proceeding of the American Helicopter Society 53rd Annual Forum, pp. 1308-1315, Virginia Beach, VA, 1997.

    Google Scholar 

  25. Samuel, P.D.; Pines, D.J.; and Lewicki, D.G.: “A Comparison of Stationary and Non-Stationary Transforms for Detecting Faults in Helicopter Gearboxes,” Journal of the American Helicopter Society, vol. 45, pp. 125-136, February 2000.

    Article  Google Scholar 

  26. Wang, W.; and McFadden P.: “Early Detection of Gear failure by Vibration Analysis – I, Calculation of the Time –Frequency Distribution,” Mechanical System and Signal Processing, vol. 7, no. 3, pp. 193-203, 1993.

    Article  Google Scholar 

  27. Cohen L.: Time-Frequency Analysis, Prentice-Hall, Inc., New York, 1995.

    Google Scholar 

  28. Winger E.P.: “On the Quantum Correction for the Thermodynamics Equilibrium,” Physics Review, vol. 40, pp. 745-759. 1932.

    Google Scholar 

  29. Ville, J.: “Theorie ef Applications de la Naotion de Signal Analytique,” Cables et Transmission, vol. 2A, pp. 61-74, 1948.

    Google Scholar 

  30. Staszewski, W.J.; Worden, K.; and Tomlinson, G.R.: “Time-Frequency Analysis in Gearbox Fault Detection Using The Winger-Ville Distribution and Patter Recognition,” Mechanical System and Signal Processing, vol. 11, no. 5, pp. 673-692, 1997.

    Article  Google Scholar 

  31. Forrester B.D.: “Use of the Winger Ville Distribution in Helicopter Transmission fault Detection,” Proceedings of the Australian Symposium on Signal Processing and Applications-ASSPA 89, Adelaide, Australia, April 17-19, 1989.

    Google Scholar 

  32. Forrester B.D.: “Analysis of Gear Vibration in the Time-Frequency Domain,” Proceedings of the 44th Meeting of the Society of Mechanical Failures Prevention Group (MFPT) of the Vibration Institute, Virginia Beach, Virginia, pp. 225-239, April 3-5, 1989.

    Google Scholar 

  33. Forrester B.D.: “Time –Frequency Analysis of helicopter Transmission Vibration,” Technical Report 108, Aeronautical Research Laboratory, ARL Propulsion, Melbourne, Australia, 1990.

    Google Scholar 

  34. Forrester B.D.: “Time –Frequency Analysis in Machine Fault Detection,” Time –Frequency Signal Analysis, B. Boashash Edition, Longman Cheshire, Melbourne, Australia, 1992.

    Google Scholar 

  35. Blunt, D.M.; and Forrester B.D.: “Health Monitoring of Blackhawk and Seahawk Main Transmission Using Vibration Analysis,” Proceedings of the 6th Australian Aeronautical Conference, 2nd Pacific Conference on Aerospace Science and technology, Melbourne, Australia, 1995.

    Google Scholar 

  36. McFadden P.D.; and Wang, W.J.: “Time-Frequency Domain Analysis of Vibration Signatures for Machinery Diagnostics (I) Introduction to the Winger-Ville Distribution,” Technical Report OUEL 1859, Department of Engineering Science, Oxford University, 1990.

    Google Scholar 

  37. McFadden P.D.; and Wang, W.J.: “Time-Frequency Domain Analysis of Vibration Signatures for Machinery Diagnostics (II) The Weighted Winger-Ville Distribution,” Technical Report OUEL 1891, Department of Engineering Science, Oxford University, 1991.

    Google Scholar 

  38. McFadden P.D.; and Wang, W.J.: “Analysis of Gear Vibration Signatures by the Weighted Winger-Ville Distribution,” Proceedings of the 5th International Conference on Vibration in Rotating Machinery, Institution of Mechanical Engineers, University of Bath, Bath, UK, pp. 387-393, 1992.

    Google Scholar 

  39. Choy, F.K.; Huang S.; Zakrajsek, J.J.; Handschuh, R.F.; and Townsend D.P.: “Analysis of the Effects of Surface Pitting and Wear on the Vibrations of Gear Transmission System,” Technical Report NASA TM-106678, ARL-TR-520, NASA and the US Army Research Laboratory, July 1994.

    Google Scholar 

  40. Newland, D.E.: “An Introduction to Random Vibration, Spectral, and Wavelet Analysis,” 3rd Edition, Longman Essex, 1993.

    Google Scholar 

  41. Wang, W.J.; and McFadden P.D.: “Application of Orthogonal Wavelets to Early Gear Damage Detection,” Mechanical System and Signal Processing, vol. 9, no. 5, pp. 497-507, 1995.

    Article  Google Scholar 

  42. Wang, W.J.; and McFadden P.D.: “Application of Wavelets to Gear Vibration Signals for Fault Detection,” Journal of Sound and Vibration, vol. 192, no. 5, pp. 927-939, 1996.

    Article  Google Scholar 

  43. Polyshchuk, V.V.; Choy, F.K.; and Braun, M.J.: “New Gear-Fault-Detection Parameter by Use of Joint Time-Frequency Distribution,” Journal of Propulsion and Power, vol. 16, no. 2, pp. 340-346, 2000.

    Article  Google Scholar 

  44. Polyshchuk, V.V.; Choy, F.K.; and Braun, M.J.: “Gear Fault Detection with Time-Frequency Based Parameter NP4,” International Journal of Rotating Machinery, vol. 8, no. 1, pp. 57-70, 2002.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical and Aerospace Engineering, Florida Institute of Technology, Melbourne, FL, 32901, USA

    Abdulrahman S. Sait & Yahya I. Sharaf-Eldeen

Authors
  1. Abdulrahman S. Sait
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yahya I. Sharaf-Eldeen
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Abdulrahman S. Sait .

Editor information

Editors and Affiliations

  1. Society for Experimental Mechanics, School Street 7, Bethel, 06801-1405, USA

    Tom Proulx

Rights and permissions

Reprints and permissions

Copyright information

© 2011 Springer Science+Business Media, LLC

About this paper

Cite this paper

Sait, A.S., Sharaf-Eldeen, Y.I. (2011). A Review of Gearbox Condition Monitoring Based on vibration Analysis Techniques Diagnostics and Prognostics. In: Proulx, T. (eds) Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9428-8_25

Download citation

  • DOI: https://doi.org/10.1007/978-1-4419-9428-8_25

  • Published:

  • Publisher Name: Springer, New York, NY

  • Print ISBN: 978-1-4419-9427-1

  • Online ISBN: 978-1-4419-9428-8

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation