Abstract
The technological characteristics of the cylindrical cups of open kettles covers were analyzed. According to the key questions of pulling crack, unreasonable drawing coefficient distribution, and irregular surface, the new process was presented and simulated by using the finite element software Dynaform. Furthermore, the binder force, friction coefficient, and profile radius of dies were selected as the optimized parameters. Then the orthogonal tests were designed and the above-mentioned parameters were optimized by analyzing the maximal thinning and the surface quality. Finally, the part with a satisfactory quality is produced.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Z. Zimniak. Problems of multi-step forming sheet metal process design. In: Journal of Materials Processing Technology, Vol.106, pp.152–158, (2002)
Yu L. Numerical simulation in multi-stage pressure-pad-force the process parameters optimization. In: Journal of Electric Processing and Mold, Vol.6, pp.32–35, (2001)
Yu Z.J. Study on numerical simulation of multi-stage deep drawing process of sheet metal. Chongqing: chongqing university, (2005)
Wang Y. H., Wu J. G. Study of multi-step forming processes based on the dynamic simulation. In: Mould technology, Vol.5, pp.20–23, (1999)
Moir, y. k. O.e bihara. Prevention, Abe has shock in multi - of metal forming stage on. In: Journal of Machine Tools & International Manufacture, pp.79–85, (2003)
Cui Y., Liu Y., Wan D. J. Comparative study on the numerical simulation and tryout result of automobile panel forming. In: Die & mould industry, Vol.34, No.7, pp.1–5, (2008)
Long Y. 3D dynamic simulation of sheet forming process and optimization of process parameters. In: Metal Forming Technology, Vol.22, No.3, pp.11–14, (2004)
Chen W., Tao H. Z. Research on process of multi-stage sheet metal drawing based on numerical simulation. In: Transactions of the Chinese Society for Agricultural Machinery, Vol.33, No.4, pp.95–98, (2002)
Xie H. X., Zhang M. Z., Jia H. B. Study on sensitivity of material constitutive parameters. In: Metal Forming Technology, Vol.21, No.2, pp.16–19, (2003)
Lai X. W., Hu S. G., Song X. W. Research on orthogonal design used to predict the springback of stamping. In: Light Industry Machinery, Vol.25, No.2, pp.63–66, (2007)
Acknowledgments
This work was supported by the Outstanding Young Teachers Foundation of Zhejiang Province, a project supported by the Scientific Research Fund of Zhejiang Provincial Education Department (Y200909760), and the key research subject of the Taizhou Vocational & Technical College (2010ZD02).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media, LLC
About this paper
Cite this paper
Chao, W., Dao-chun, H. (2012). Multistage Drawing Process of Cylindrical Cups Based on Numerical Simulation Analysis and Experimental Study. In: Chen, R. (eds) 2011 International Conference in Electrics, Communication and Automatic Control Proceedings. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-8849-2_17
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8849-2_17
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-8848-5
Online ISBN: 978-1-4419-8849-2
eBook Packages: EngineeringEngineering (R0)