Abstract
Rocks are composites made of grains that are cemented together by different materials. The strength and seismic properties of the rock depend on the stiffness of the cement. Traditional techniques, such as scanning and transmission electron and optical microscopy can help identify variations in type of cement. However, they provide qualitative descriptions only. We demonstrate here applications of scanning acoustic microscopy (SAM) to quantify microstructure as variations in acoustic impedance. The acoustic maps can then be used to understand the seismic response of the rock. For example, ultrasonic measurements on kerogen shales have shown that the elastic modulus increases with increasing kerogen maturity. SAM of these shales shows a stiffening of the shale framework with increasing kerogen maturity. The load-bearing material changes from low impedance kerogen to high impedance shale. The impedance values determined from SAM are comparable with those obtained from ultrasonic time-of-flight data. In contrast, the cement is load bearing in sandstones where high impedance quartz grains are cemented together by low impedance clay. The cement determines not only the total impedance of the rock but also its pressure dependence.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
G.A.D. Briggs, Acoustic Microscopy: Monographs on the Phys. and Chem. Materials47Oxford Science Publications, Oxford1992.
S. Hirsekorn, and S. Pangraz, Materials characterization with the acoustic microscopeAppl. Phys. Lett.: 64: 1632–16341994.
S Hirsekorn,. S. Pangraz, G. Weides, and W. Arnold, Measurement of elastic impedance with high spatial resolution using acoustic microscopyAppl. Phys. Lett 67: 745–7471995.
L. Vernik and X. Liu, Velocity anisotropy in shales: A petrophysical studyGeophysics 62521–5321997.
M. Prasad, M., Mapping impedance microstructures in rocks with acoustic microscopyThe Leading Edge: 20: 172–1792001.
M. Prasad, M., Correlating Permeability with Velocity using Flow Zone Indicators: submitted to Geophysics.
Prasad, M. and Dvorkin, J., Velocity-porosity transforms in marine sedimentsPetrophysics 42: 42–472001.
J. Urmos, R.H. Wilkens, F. Bassinot, M. Lyle, J.C. Marsters, L. A. Mayer, and D.C. Mosher, Laboratory and well-log velocity and density measurements from the Ontong Java Plateau: New in-situ corrections to laboratory data for pelagic carbonates, in Proc. of the Ocean Drilling Program, Scientific ResultsW.H. Berger, et al., Eds., Ocean Drilling Program, v. 130607–6221993.
D. Han, A. Nur, and F. D. Morgan, Effect of porosity and clay content on wave velocities of sandstonesGeophysics: 51:2093–21071996
L. Vemik, L. and A. Nur, Ultrasonic velocity and anisotropy of hydrocarbon source rocks: Geophysics 57: 727–73511994.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media New York
About this chapter
Cite this chapter
Prasad, M., Reinstaedtler, M., Nur, A., Arnold, W. (2002). Quantitative Acoustic Microscopy. In: Maev, R.G. (eds) Acoustical Imaging. Acoustical Imaging, vol 26. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-8606-1_62
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8606-1_62
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-4644-9
Online ISBN: 978-1-4419-8606-1
eBook Packages: Springer Book Archive