Abstract
Macromolecular modifiers are used to improve some physical properties, mainly mechanical properties of polymers. They have found wide-spread application in the reduction of basic defects of polymers in their glassy state, mainly their resistance to low-energy impact, and they are used also to modify rheological properties of polymer melts [1].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Olabisi, O., Robeson, L.M., Shaw, M.T.: Polymer-Polymer Miscibility. Academic Press, New York, 1979
Štěpek, J., Heidingsfeld, V.: Chem. listy 59, 823 (1965)
Krause, S.: J. Macromol. Sci., Rev. Macromol. Chem. 7, 251 (1972)
Krause, S.: in “Polymer Blends” (eds. Paul, D.R., and Newman, S.), Chapter 2. Academic Press, New York, 1978
Pazonyi, T., Dimitrov, M.: Rubb. Chem. Technol. 40, 1119 (1967)
Shvarc, A.G.: Kolloid Zh. 13, 755 (1956)
Gul, V.E., Kulezniev, V.N.: Struktura i mechanicheskie svoistva polimerov. Vysshaia Shkola, Moscow, 1972
Strunimskii, G.V., Slonimskii, G.L.: Zh. fiz chim. 30, 1941 (1956)
Alexeienko, V.I., Mishustin, I.U., Voiuckii, S.S.: Dokl. Akad. Nauk SSSR 95, 93 (1954)
Flory, P.J., Eichinger, B.E., Orwoll, R.A.: Macromolecules 1, 287 (1968)
Hildebrand, J.H., Scott, R.L.: The Solubility of Nonelectrolytes, 3rd ed. Reinhold, New York, 1950 (reprinted by Dover, New York, 1964)
Small, P.A.: J. Appl. Chem. 3, 71 (1953)
Scott, R.L.: J. Chem. Phys. 13, 178 (1945); ibid. 17, 279 (1949)
Hildebrand, J.H., Scott, R.L.: Regular Solutions. Prentice-Hall, Englewood Cliffs, N.J., 1962
Tlustá, H., Zelinger, Z.: Chem. listy 65, 1143 (1971)
Hugues, H.J., Britt, J.E.: J. Appl. Polym. Sci. 5, 337 (1961)
Molau, G.E.: J. Polym. Sci. 3A, 1276 (1965)
Thinius, K.: Plast. Kautsch. 15, 164 (1968)
Friese, K.: Plast. Kautsch. 12, 90 (1965); ibid. 15, 646 (1968)
Feldman, D., Rusu, M.: Europ. Polymer J. 6, 627 (1970); ibid. 7, 215 (1971)
Feldman, D., Rusu, M.: Plast. Kautsch. 20, 259 (1973)
Budtov, V.P., Manokov, Yu. B., Duvakina, N.V., Teller, B.E.: Vysokomol. Soed. A, 16, 1587 (1974)
Bohmer, B., Berek, D., Florian, S.: Europ. Polym. J. 6, 471 (1970)
Kulezniev, V.N., Krochina, L.S.: Vysokomol. Soed. A, 15, 906 (1973)
Dobry, A., Boyer-Kawenoki, F.: J. Polym. Sci. 2, 90 (1947)
Scott, R.L.: J. Polym. Sci. 9, 423 (1952)
Marcincin, K., Romanov, A., Pollak, V.: J. Appl. Polym. Sci. 16, 2239 (1972)
Bohn, L.: Angew. Macromol. Chem. 29/30, 25 (1973)
Smirnova, N.V., Aivazov, A.B., Dinzburk, B.N., Alexeienko, V.I.: Vysokomol. Soed. B, 17, 405 (1975)
Feldman, D., Rusu, M.: Mater. Plast. 7, 106 (1970)
Hammer, C.F.: Macromolecules 4, 69 (1971)
Aivazov, A.B., Zeleniev, Yu. V., Barteniev, G.M.: Mech. polim. 6, 318 (1969)
Kiowa, S.: J. Appl. Polym. Sci. 19, 1625 (1975)
Shur, Y.J., Rånby, B.: J. Appl. Polym. Sci. 19, 1335 (1975): ibid. 19, 2143 (1975)
Tager, A.A.: Rastvory Vysokomoliekuliarnych Soedinienii. Gosehimizdat, Moscow, 1951
Gould, R.F.: Multicomponent Polymer Systems, Advances in Chemistry, Series 99, Washington, 1971
Kaufman, M.: Advances in PVC compounding and processing. Maclaren, London, 1962
Bragan, C.G.: The theory of rubber toughening of brittle polymers. In: Multicomponent Polymer Systems, Advances in Chemistry, Series 99, Washington, 1971, p. 86
Merz, E.H., Claver, C.G., Baer, M.: J. Polym. Sci. 22, 325 (1956)
Davenport, N.E., Hubbart, L.M., Pettit, M.R.: Brit. Plast. 32, 549 (1959)
Branfit, G., Heaps, J.F.: Rubb. Plast. Age (1961), p. 391
Dominghaus, H.: Plastics 30, (336), 81 (1965)
Anon.: Japan Plast. Age 3, (4), 30 (1965)
Houwink, R., Staverman, A.J.: Chemie und Technologie der Kunststoffe, Band II. Akademische Verlagsgesellschaft, Geest und Portig, Leipzig, 1963
Michler, G., Gruber, K.: Plast. Kautsch. 23, 346 (1976)
Fleischer, D., Kloos, F., Brandrup, J.: Angew. Makromol. Chem. 62, 69 (1977)
Altmann, V., IŠtěpek, J., unpublished results
Gobel, W., Batl, H., Hardt, D., Reischel, A.: Kunststoffe 55, 329 (1965)
Zelinger, J., Heidingsfeld, V., Prokopová, L.: Sci. Papers Prague Inst. Chem. Technol. C24, 53 (1976)
Zelinger, J., Heidingsfeld, V., Altmann, V.: Plast. Kautsch. 13, (5), 129 (1976): ibid. 13, (7), 193 (1976)
Lee, C.C., Rowati, W., Skinner, S.M., Bobalek, C.G.: J. Appl. Polym. Sci. 9, 2047 (1965)
Albert, W.: Kunststoffe 55, 86 (1963)
Kambour, R.P., Bernier, G.A.: Macromolecules 1, 190 (1968)
Kambour, R.P.: Appl. Polym. Symp. 7, 215 (1968)
Menges, G., Schmidt, H.: Plast Polym. 38, (133), 13 (1970)
Kambour, R.P.: Alterung und Korrosion von Kunststoffen Korrosion-Verlag-Chemie. Weinheim, 1967
Spurr, O.K., Niegish, W.D.: J. Appl. Polym. Sci. 6, 585 (1962)
Kambour, R.P.: Polymer 5, 143 (1964)
Kambour, R.P.: J. Polym. Sci. A2, 4159 (1964)
Rudd, J.F.: J. Polym. Sci. B1, 1 (1963)
Newman, S.B., Strella, S.: J. Appl. Polym. Sci. 9, 2297 (1965)
Berry, J.P.: J. Polym. Sci. 50, 107 (1961)
Kambour, R.P.: J. Polym. Sci. A3, 1713 (1965)
Newman, S.B.: Polym. Eng. Sci. 5, (3), 159 (1965)
Orowonan, E.: Welding J. (NY) 34, (3), 157 (1955)
Irwin, G.R.: Encyclopedia of Physics, Vol. 6. Springer-Verlag, Berlin, 1958, p. 551
Cessna, L.C., Sternstein, S.S.: J. Polym. Sci. B3, 825 (1965)
Morey, D.R.: Ind. Eng. Chem. 37, (3), 225 (1945)
Mullins, L.: Rubb. Chem. Technol. 33, 325 (1960)
Schmitt, J.A., Keskkola, H.: J. Appl. Polym. Sci. 3, 132 (1960)
Brighton, C.A., Skinner, S.J.: Trans. Plast. Inst. 31, (93), 70 (1963)
Bucknall, C.B., Smitt, R.R.: Polymer 6, (8), 437 (1967)
Sternstein, S.S., Ongchin, L., Silverman, A.: Appl. Polym. Symp. 7, 175 (1968)
Nielsen, L.E.: Mechanical Properties of Polymers. Reinhold, New York, 1962, p. 105.
Nielsen, L.E.: Rheol. Acta 13, 86 (1974)
Strella, S.: Appl. Polym. Symp. 7, 165 (1968)
Bier, G.: Kunststoffe 55, 694 (1965)
Burnell, C.N., Parry, R.H.: Rubb. Age 100, 47 (1968)
Hostalit, Z.: Prospective Farbwerke Hoechst (BRD)
Štěpek, J., Šimek, J., Novaková, Z., unpublished results
Fleischer, D., Scherer, H., Bandrup, J.: Angew. Makromol. Chem. 58/59, 121 (1977)
Elmqvist, C., Svanson, S.E.: Eur. Polym. J. 12, 559 (1976)
Feldman, D., Rusu, M.: Eur. Polym. J. 10, 41 (1974)
Rånby, B.G.: J. Polym. Sci., Polym. Symp. 51, 89 (1975).
Elmqvist, C., Svanson, S.E.: Eur. Polym. J. 11, 789 (1975)
Hardt, D.: Br. Polym. J. 1, 225 (1969)
Catalogue of Farbenfabriken Bayer (B.R.D.)
Bohn, L.: Kunststoffe 53, 93 (1963)
Toughness and Brittleness of Plastics (eds. Deanin, R.D., Grugnola, A.M.). Adv. Chem. Ser. No. 154. Am. Chem. Soc., Washington, D.C., 1976
Sato, K.: Japan Plast. Age (1969), May, p. 52
Bryan, C.E.: Polyblends and composites, Appl. Polym. Symp. No. 15, Interscience, New York, 1970, p. 165
Zelinger, J., to be published
Anon.: Plast. World 35, (11), 56 (1977)
Deanin, R.D., Geoffroy, R.R.: Am. Chem. Soc., Div. Org. Coat. Plast. Chem., Pap. 37, (1), 257 (1977)
Forger, G.R.: Mater. Eng. 85, (8), 44 (1977)
Dunn, J.R.: Rubb. Chem. Technol. 49, 978 (1976)
Corish, P.J., Powell, D.W.: Rubb. Chem. Technol. 47, 481 (1974)
Corish, D.J.: Rubb. Chem. Technol. 40, 324 (1967)
Speri, W.M., Patrick, G.R.: Polym. Eng. Sci. 15, 668 (1975)
Kumbhani, K.J.: Soc. Plast. Eng., Tech. Pap. 35, 23 (1977)
Thamm, R.C.: Rubb. Chem. Technol. 50, 24 (1977)
Morris, H.L.: J. Elast. Plast. 6, 119 (1974)
Fisher, W.K.: Mod. Plast. Encycl. 51, (10A), 116 (1974)
Morris, H.L.: J. Elast. Plast. 6, 1 (1974)
Rubb. World 167, (5), 49 (1973)
Robeson, L.M.: in “Problem Solving with Plastics” (ed. Van Delinger, L.S.), p. 87. Natl. Assoc. Corrosion Eng., Houston, Texas, 1971
McGrath, J.E., Robeson, L.M., Matzner, M. In: Recent Advances in Polymer Blends, Grafts and Blocks (ed. Sperlin, L.H.), Plenum, New York, 1974, p. 195
Martin, J.R.: 22nd Annual Tech. Conf. SPE, XXV-1, 1966
Arkles, B., Thebarge, J., Schireson, M.: J. Am. Soc. Lub. Eng. 33, (1), 33 (1976)
Seymour, R.B.: Mod. Plast. Encycl. 53, (10A) 172 (1977)
Riddle, F.L.: 22nd Annual Tech. Conf. SPE, 1X-2, 1966
Zelinger, J., Volfová, E., Zahradniková, H., Pelzbauer, Z.: Int. J. Polym. Mater. 5, 99 (1976)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1983 Springer Science+Business Media New York
About this chapter
Cite this chapter
Štěpek, J., Daoust, H. (1983). Macromolecular Modifiers. In: Additives for Plastics. Polymers, vol 5. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-8481-4_4
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8481-4_4
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4612-6417-0
Online ISBN: 978-1-4419-8481-4
eBook Packages: Springer Book Archive