Abstract
mdash MEMS (Microelectromechanical System) reliability is a very critical issue for its commercial applications. In order to measure the reliability of MEMS, a systematic reliability model is required. In this paper, we developed a MEMS reliability model for quantitative assessment of the MEMS reliability analysis. Based on this model, we analyze the reliability of both BISR (built-in-self-repairable) and non-BISR MEMS comb accelerometers under Z-axis shocking environment. Simulation results demonstrate very effective reliability enhancement due to the BISR design. The reliability model can also be applied to other MEMS devices under various failure mechanisms in a similar way.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
B. Stark (editor), ”MEMS Reliability Assurance Guidelines for Space Applications”, Jet Propulsion Laboratory Publication 99-1, Pasadena, USA, Jan. 1999.
M. Tabib-Azar, K. Wong, and W. Ko, ”Aging Phenomena in heavily doped (p+) micromachined silicon cantilever beams”, Sensors and Actuators A, Vol. 33, pp. 199-206, 1992.
C. L. Muhlstein, R. T. Howe, and R. O. Ritchie, ”Fatigue of polycrystalline silicon for microelectromechanical system applications: crack growth and stability under resonant loading conditions”, Mechanics of Materials, Vol. 36, pp. 13-33, 2004.
D. M. Tanner, J. A.Walraven, K. Helgesen, L.W. Irwin, F. Brown, N. F. Smith, and N. Masers, ”MEMS reliability in shock environments”, Proceedings of IEEE International Reliability Physics Symposium, San Jose, CA, USA, pp. 129-138, Apr. 10-13, 2000.
D. M. Tanner, J. A. Walraven, K.S.Helgesen, L. W. Irwin, D. L. Gregory, J. R. Stake, and N. F. Smith, ”MEMS reliability in a vibration environment”, IEEE 38th Annual International Reliability Physics Symposium, San Jose, California, USA, pp. 139-145, 2000.
W. M. V. Spengen, R. Puers, and I. D. Wolf, ”On the physics of stiction and its impact on the reliability of microstructures”, Journal of Adhesion Science and Technology, Vol. 17, No. 4, pp. 563-582, 2003.
X. Xiong, Y. Wu, and W. Jone, ”Design and analysis of self-repairable MEMS accelerometer,” Proceedings of the 20th IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems (DFT’ 05), Monterey, CA, USA, pp. 21-29, Oct. 3-5, 2005.
K. Neubeck, Practical Reliability Analysis, Pearson Prentice Hall, New Jersey, USA, 2004.
W. Kuehnel, and S. Sherman, ”A Surface Micromachined Silicon Accelerometer with On-chip Detection Circuitry,” Sensors and Actuators, Vol. A, Issue 45, pp. 7-16, 1994.
X. Xiong, Built-in self-test and self-repair for capacitive MEMS devices, Ph.D dissertation, University of Cincinnati, July 2005.
S. Greek, F. Ericson, S. Johansson, and J. Schweitz, ”In situ tensile strength measurement and Weibull analysis of thick film and thin film micromachined polysilicon structure”, Thin Solid Films, Vol. 292, pp. 247-254, 1997.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer Science+Business Media B.V.
About this paper
Cite this paper
Xiong, X., Wu, YL., Jone, WB. (2008). Reliability Model for MEMS Accelerometers. In: Sobh, T., Elleithy, K., Mahmood, A., Karim, M.A. (eds) Novel Algorithms and Techniques In Telecommunications, Automation and Industrial Electronics. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-8737-0_47
Download citation
DOI: https://doi.org/10.1007/978-1-4020-8737-0_47
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-8736-3
Online ISBN: 978-1-4020-8737-0
eBook Packages: EngineeringEngineering (R0)