While much attention has been given to optimizing initial fuel cell performance, only recent research has focused on the various materials degradation mechanisms observed over the life-time of fuel cells under real-life operating conditions. This presentation will focus on fuel cell durability constraints produced by platinum sintering/dissolution, carbon-support oxidation, and membrane chemical and mechanical degradations.
Over the past 10 years, extensive R&D efforts were directed towards optimizing catalysts, membranes, and gas diffusion layers (GDL) as well as combining them into improved membrane electrode assemblies (MEAs), leading to significant improvements in initial performance of H2/air-fed proton exchange membrane fuel cells (PEMFCs) and methanol/air-fed direct methanol fuel cells (DMFCs). While the required performance targets have not yet been met, current PEMFC and DMFC performance are close to meeting entry-level applications and many prototypes have been developed for field testing. This partially shifted the R&D focus from performance optimization to more closely examining materials degradation phenomena which limit fuel cell durability under real-life testing conditions.
The predominant degradation mechanisms are sintering/dissolution of platinum-based cathode catalysts under highly dynamic operating conditions, dissolution of ruthenium from DMFC anode catalysts, the oxidation of carbon-supports of the cathode catalyst during fuel cell startup and shutdown, and the formation of pinholes in proton exchange membranes if subjected to extensive local relative humidity cycling. These various mechanisms and their impact of fuel cell durability will be discussed in the following.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
H.A. Gasteiger, S.S. Kocha, B. Sompalli, and F.T. Wagner, Activity Benchmarks and Requirements for Pt, Pt-Alloy, and Non-Pt Oxygen Reduction Catalysts for PEMFCs, Appl. Catal. B 56, 9 (2005).
P. Piela and P. Zelenay, Researchers Redefine The DMFC Roadmap, The Fuel Cell Review Aug./Sept., 17 (2004).
J. Müller, G. Frank, K. Colbow, and D. Wilkinson, “Transport/Kinetic Limitations and Efficiency Losses”, in: Handbook of Fuel Cells: Fundamentals, Technology, and Applications, edited by W. Vielstich, A. Lamm, and H.A. Gasteiger (Wiley, Chichester, UK, 2003), vol. 3, pp. 847-855.
P.J. Ferreira, G.J. la O’, Y. Shao-Horn, D. Morgan, R. Makharia, S.S. Kocha, and H.A. Gasteiger, Instability of Pt/C Electrocatalysts in Proton Exchange Membrane Fuel Cells - A Mechanistic Investigation, J. Electrochem. Soc. 152, A2256 (2005).
P. Piela, C. Eickes, E. Brosha, F. Garzon, and P. Zelenay, Ruthenium Crossover in Direct Methanol Fuel Cell with Pt-Ru Black Anode, J. Electrochem. Soc. 151, A2053 (2004).
C.A. Reiser, L. Bregoli, T.W. Patterson, J.S. Yi, J.D. Yang, M.L. Perry, and T.D. Jarvi, A Reverse-Current Decay Mechanism for Fuel Cells, Electrochem. Solid State Lett. 8, A273 (2005).
M.F. Mathias, R. Makharia, H.A. Gasteiger, J.J. Conley, T.J. Fuller, C.J. Gittleman, S.S. Kocha, D.P. Miller, C.K. Mittelsteadt, T. Xie, S.G. Yan, and P.T. Yu, Two Fuel Cell Cars In Every Garage? Interface (The Electrochemical Society, 2005), 14, pp. 24-35.
T. Tada, “High Dispersion Catalysts Including Novel Carbon-Supports”, in: Handbook of Fuel Cell, edited by W. Vielstich, A. Lamm, and H.A. Gasteiger (Wiley, Chichester, UK, 2003), vol. 3, pp. 481-488.
H.A. Gasteiger, Y. Liu, D. Baker, and W. Gu, “Kinetics and Kinetically Limited Performance in PEMFCs and DEMFCs with State-of-the-Art Catalysts”, in this book.
K. Kinoshita, J.T. Lundquist, and P. Stonehart, Potential Cycling Effects on Platinum Electrocatalyst Surfaces, J. Electroanal. Chem. 48, 157 (1973).
P. Yu, M. Pemberton, and P. Plasse, Ptco/C Cathode Catalyst for Improved Durability In PEMFCs, J. Power Sources 144, 11 (2005).
F.T. Wagner, H.A. Gasteiger, R. Makharia, K.C. Neyerlin, E.L. Thompson, and S.G. Yan, Catalyst Development Needs and Pathways for Automotive PEM Fuel Cells, ECS Trans. 3 (1), 19 (2006).
J. Aragane, T. Murahashi, and T. Odaka, Change of Pt Distribution in the Active Components of Phosphoric Acid Fuel Cell, J. Electrochem. Soc. 135, 844 (1988).
J. Aragane, H. Urushibata, and T. Murahashi, Effect of Operational Potential On Performance Decay Rate in a Phosphoric Acid Fuel Cell, J. Appl. Electrochem. 26, 147 (1996).
M. Uchimura and S.S. Kocha, The Impact of Cycle Profile on PEMFC Durability, ECS Trans. 11 (1), 1215 (2007).
S. Mitsushima, Y. Koizumi, S. Uzuka, and K. Ota, Dissolution Mechanism of Platinum in Acidic Media, ECS Trans. 11 (1), 1195 (2007).
P. Yu, W. Gu, R. Makharia, F.T. Wagner, and H.A. Gasteiger, The Impact of Carbon Stability on PEM Fuel Cell Startup and Shutdown Voltage Degradation, ECS Trans. 3 (1), 797 (2006).
H.A. Gasteiger, W. Gu, R. Makharia, M.F. Mathias, and B. Sompalli, “Beginning-of Life MEA Performance - Efficiency Loss Contributions”, in: Handbook of Fuel Cells, edited by W. Vielstich, A. Lamm, and H.A. Gasteiger (Wiley, Chichester, UK, 2003)., vol. 3, pp. 593-610.
M.L. Perry, T.W. Patterson, and C. Reiser, Systems Strategies to Mitigate Carbon Corrosion in Fuel Cells, ECS Trans. 3 (1), 783 (2006).
W. Liu and S. Cleghorn, Effect of Relative Humidity on Membrane Durability in PEM Fuel Cells, ECS Trans. 1 (8), 263 (2006).
E. Endoh, Highly Durable MEA for PEMFC Under High Temperature and Low Humidity Conditions, ECS Trans. 3 (1), 9 (2006).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer Science+Business Media B.V
About this paper
Cite this paper
Gasteiger, H.A. et al. (2008). Catalyst Degradation Mechanisms in PEM and Direct Methanol Fuel Cells. In: Kakaç, S., Pramuanjaroenkij, A., Vasiliev, L. (eds) Mini-Micro Fuel Cells. NATO Science for Peace and Security Series C: Environmental Security. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-8295-5_15
Download citation
DOI: https://doi.org/10.1007/978-1-4020-8295-5_15
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-8293-1
Online ISBN: 978-1-4020-8295-5
eBook Packages: EngineeringEngineering (R0)