Environmental control of waste generation in the oilfield processes, discussed in Chapters 2 and 4, may pro-actively reduce the waste volume and toxicity but cannot eliminate the waste altogether. Typically, in offshore operations the waste would be either disposed of on-site by discharging to the sea – as discussed in another section of this book, or reinjected to disposal wells – as discussed in this chapter, below. In the onshore operations, the waste fluids would be temporarily stored in earthen pits (on-site or off-site) before its ultimate disposal to the land or subsurface.
Land disposal of oilfield waste, known also as “pit closure by land treatment” may be performed using landspreading or landfarming. Lanspreading involves spreading the waste over the surface of the ground and tilling it into the soil. After this initial tilling, no further action is needed. In land farming, the soil is commonly processed for several seasons after the initial application of the waste. This additional processing may include adding fertilizers and tilling repeatedly to increase oxygen uptake in the soil.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Wojtanowicz, A.K. (1999) Oilfield pit management, Chapter 8 in Environmental Engineering for Exploration and Production Activities, SPE Monograph (Eds. M.J. Wilson, and J.D. Frederick), Vol. 18, Society of Petroleum Engineers, Richardson, TX.
Moseley, H.R. (1983) Summary and analysis of API onshore drilling mud and produced water environmental studies. American Petroleum Institute Bulletin D19.
Miller, R.W. and Honarvar, S. (1975) Effect of drilling fluid component mixtures on plants and soil. EPA 560/1–75-004. Conf. Proc. Environmental Aspects of Chemical Use in Well Drilling Operations, Houston, TX, May, 125–43.
Murphy, E.C. and Kehew, A.E. (1984) The effect of oil and gas well drilling fluids on shallow groundwater in Western North Dakota. Report No. 82, North Dakota Geological Survey.
Miller, R.W., Honarvar, S. and Hunsaker, B. (1980) Effects of drilling fluids on soils and plants: 1. Individual fluid components. Journal of Environmental Quality, 547–52.
Whitmore, J. (1982) Water base drilling mud land spreading and use as a site reclamation and revegetation medium. Fosgren-Perkins Engineering Report, API Production Department, Dallas, TX.
Henderson, G. (1982) Analysis of hydrologic and environmental effects of drilling mud pits and produced water impoundments. Dames and Moore Report, API Production Department, Dallas, TX.
EPA (1993) Standards for the Use or Disposal of Sewage Sludge, 40 Code Federal Register, Parts 257, 403 and 503, US Environmental Protection Agency, Washington, DC.
API (1995) Metals Criteria for Land Management of Exploration and Production Wastes: Technical Support Document for API Recommended Guidance Values. Publication 4600, American Petroleum Institute, Washington, DC.
Pal, D and Overcash, M.R. (1978) Plant oil assimilation capacity for oils. Proc. 85th National Meeting of American Institute of Chemical Engineers, Philadelphia, PA.
LADNR (1990) Amendment to Statewide Order No. 29-B. Office of Conservation, Louisiana Department of Natural Resources, Baton Rouge, LA.
Freeman, B.D. and Deuel, L.E. (1984) Guidelines for closing drilling waste fluid pits in wetland and upland areas. Proc. 7th Annual Energy Source Technology Conference and Exhibition, Petroleum Division of ASME, New Orleans, 12–16 February.
API (1995) Criteria for pH in Onshore Solid Waste Management in Exploration and Production Operations. Publication 4595, American Petroleum Institute, Washington, DC.
Deuel, L.E. Jr. and Holliday, G.E. (1994) Soil Remediation for the Petroleum Extraction Industry, Pennwell, Tulsa, OK.
Deuel, L.E., Jr. and Freeman, B.D. (1989) Amendment to Louisiana statewide order 29–B: suggested modifications for barium criteria. Proc. SPE/IADC Drilling Conference, New Orleans, LA, 28 February–3 March, 481–86.
Carter, M.R. (1993) Soil Sampling and Methods of Analysis. Lewis, Boca Raton, FL, 91–3.
Wojtanowicz, A.K., Field, S.D., Krilov, Z. and Spencer, F.L. Jr. (1989) Statistical assessment and sampling of drilling fluid reserve pits. SPE Drilling Engineering, June.
Peterson, R.G. and Calvin, L.D. (1986) Sampling, in Methods of Soil Analysis, Part 1: Physical and Mineralogical Methods (Eds. A. Klute et al.), American Society of Agronomy Monograph, 9 (1), 33–50.
Crepin, J. and Johnson, R.L. (1993) Soil sampling for environmental assessment, in Soil Sampling and Methods for Analysis (Ed. M.R. Carter), Canadian Society of Soil Science, Lewis, Ann Arbor, MI.
Wojtanowicz, A.K. et al. (1987) Comparison study of solid/liquid separation techniques for oilfield pit closures. Journal of Petroleum Technology, July, 845–56.
Osterman, M.C., Wojtanowicz, A.K. and Field, S.D. (1987) The development study of a centrifuging technique for oilfield production pit closure. Transactions of the ASME, Energy Resources Technology, December.
API (1993) Evaluation of Limiting Constituents Suggested for the Land Disposal of Exploration and Production Wastes, Publication 4527, American Petroleum Institute, Washington, DC.
LADNR (1989) Laboratory Procedures for Analysis of Oilfield Waste, Office of Conservation, Louisiana Department of Natural Resources, Baton Rouge, LA.
Veil J.A., and Dusseault M.B. (2003) Evaluation of slurry injection technology for management of drilling waste. Final Report, DOE Contract W-31–109-ENG-38, May.
McCaskill, C. (1985) Well annulus disposal of drilling waste. Proc. National Conference on Disposal of Drilling Waste, University of Oklahoma, Environmental and Ground–water Institute, Norman, OK, 30–31 May, 28–34.
Malachosky, E., Shannon, B.E. and Jackson, J.E. (1993) Offshore disposal of oil-based drilling fluid waste: an environmentally acceptable solution. SPE 23373, Proc. First International Conference on Health Safety and Environment, The Hague, The Netherlands, 10–14 November, 465–73; also SPE Drilling and Completion, December, 283–87.
Louviere, R.J. and Reddoch, J.A. (1993) Onsite disposal of rig-generated waste via slurrification and annular injection. SPE/IADC 25755, Proc. 1993 SPE/IADC Drilling Conference, Amsterdam, The Netherlands, 23–25 February, 737–51.
Anderson, E.E., Louviere, R.J. and Witt, D.E. (1993) Guidelines for designing safe, environmentally acceptable downhole injection operations. SPE 25964, Proc. SPE/EPA Exploration and Production Environmental Conference, San Antonio, TX, 7–10 March, 279–86.
Smith, R.I. (1991) The cuttings grinder. SPE 22092, Proc. SPE International Arctic Technology Conference, Anchorage, AL, 28–31 May.
Minton, R.C. (1992) Annular reinjection of drilling waste. SPE 25042, Proc. European Petroleum Conference, Cannes, France, 16–18 November, 247–53.
Sirevag, G. and Bale, A. (1993). An improved method for grinding and reinjecting of drill cuttings. SPE/IADC 25758, Proc. 1993 SPE/IADC Drilling Conference, Amsterdam, The Netherlands, 23–25 February, 773–88.
Gardiner, N.H. (1994) NORM Scale safely disposed of by fracturing well. Oil and Gas Journal, 23 March, 68–71.
Marinello, S.A. et al. (1996) NORM waste disposal methods: technology, risk, liability. SPE 36642, Proc. SPE Annual technical Conference and Exhibition, Denver, CO, October, 6–9.
Marinello, S.A. et al. (1996) Nonhazardous oil filed waste disposal into subpressured zones. Environmental Geoscience, Vol. 3, No. 4, 199–203.
Schmidt et al. (1999) Large-scale injection of North Slope drilling cuttings. SPE 52738, Proc. 1999 SPE/EPA/DOE Exploration and Production Environmental Conference, Austin, TX, 28 February–3 March.
Baker, B. et al. (1999) Large-scale NOW/NORM disposal through slurry waste injection. SPE 53821, Proc. SPE Latin America and Caribbean Petroleum Engineering Conference, Caracas, 21–23 April.
Baker, B, et al. (1999) Large-scale NOW/NORM disposal through slurry waste injection: data analysis and modeling. SPE 56491, Proc. SPE Annual Technical Conference and Exhibition, Houston, TX, 3–6 October.
Reed, A.C. et al. (2001) Safe disposal of one million barrels of NORM in Louisiana through slurry fracture injection. SPE 71434, Proc. SPE Annual Technical Conference and Exhibition, New Orleans, LA, 30 September–3 October.
Keck, R.G. (2002) Drill cuttings injection: a review of major operations and technical issues. SPE 77553, Proc. SPE Annual technical Conference and Exhibition, San Antonio, TX, 29 September–2 October.
Hagan, J.T. et al. (2002) Engineering and operational issues associated with commingled drill cuttings and produced water re-injection schemes. SPE 73918, Proc. SPE International Conference on health, Safety, and the Environment, Kuala Lumpur, Malaysia, 20–22 March.
Abou-Sayed, A.S., Andrews, D.E. and Buhidma, I.M. (1989) Evaluation of oily waste injection below the permafrost in Prudhoe Bay field. SPE 18757, Proc. SPE California Regional Meeting, Bakersfield, CA, 5–7 April, 129–42.
Bruno, M.S. et al. (1995) Economic disposal of solid oilfield wastes through slurry fracture injection. SPE 29646, Proc. 1995 SPE Western Regional Meeting, Bakersfield, CA, 8–10 March.
Bruno, M.S. and Qian, H.X. (1995) Economic disposal of solid oilfield wastes, Journal of Petroleum Technology, September, 775.
Willson, S.M., Rylance, M. and Last, N.C. (1993) Fracture mechanics issues relating to cuttings reinjection at shallow depth. SPE/IADC 25756, Proc. 1993 SPE/IADC Drilling Conference, Amsterdam, The Netherlands, 23–25 February, 753–62.
Kech, R.G. and Withers, R.J. (1994) A field demonstration of hydraulic fracturing for solids waste injection with real-time passive seismic monitoring. SPE 28495, Proc. SPE 69th Annual Technical Conference and Exhibition, New Orleans, LA, 28–28 September, 319–34.
Minton, R.C. (1994) Downhole injection of OBM cuttings economical in North Sea, Oil and Gas Journal, 30 May.
Minton, R.C. (1993) Annular reinjection of drilling wastes, Journal of Petroleum Technology, November.
Minton, R.C., Meader, A. and Willson, S.M. (1992) Downhole cuttings injection allows use of oil-base muds. World Oil, 47–52.
Truby, L.S. et al. (1994) Data gathering for comprehensive hydraulic fracturingdiagnostic project: a case study. IADC/SPE 27506, Proc. 1994 IADC/SPE Drilling Conference, Dallas, TX, February, 15–18.
Weng, X. et al. (1997) A filed demonstration of hydraulic fracturing for solid waste disposal: injection pressure analysis. Proc. North American Rock Mechanics Symposium, New York, NY, June.
Hainey, B.W. et al. (1999) On-site fracturing disposal of oilfiled wasre solids in Wilmongton field, Lon Beach unit, Calofornia. SPE 56070, also, SPE Production and Facilities, Vol. 14, No. 2, May.
Moschovidis, Z.A. et al. (1994) Disposal of oily cuttings by downhole periodic fracturing injections, Valhall, North Sea: case study and modelling concepts. SPE Drilling and Completion, December, 256–62.
Schmidt, J.H. et al. (1995) Slurry injection into disaggregated earth formations. US Patent 5387737, 7 February.
Perkins, T.K. (1994) Disposal of waste solids in hydraulic fractures. Proc. International Symposium on Computer Methods and Advances in Geomechanics, Morgiontown, WV, 23–28 May.
Willson, S.M. et al. (1999) Laboratory investigation of drill cuttings disposal by downhole injection. Proc. 37th US Rock mechanics Symposium, Vail, CO.
Moschovidis, Z.A. et al. (2001) The mounds drill cuttings experiment; determining placement of drill cuttings by hydraulic fracturing injection. SPE 48987, Proc. SPE Annual Technical Conference and Exhibition, New Orleans, LA, 30 September–3 October.
Moschovidis, Z.A. et al. (2000) The mounds drill cuttings injection field experiment: final results and conclusions. IADC/SPE 59115, Proc. IADC/SPE Drilling Conference, New Orleans, LA, 23–25 February.
Peterson, R.E. et al. (2001) Assessment of the mounds drill cuttings injection disposal domain. SPE 71378, Proc. SPE Annual Technical Conference and Exhibition, New Orleans, LA, 30 September–3 October.
Bruno, M.S. et al. (2000) Environmental management, cost management, and asset management for high-volume oilfiled waste injection projects. IADC/SPE 59119, Proc. IADC/SPE Drilling Conference, New Orleans, LA, 23–25 February.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer Science + Business Media B.V
About this chapter
Cite this chapter
Wojtanowicz, A.K. (2008). Oilfield Waste Disposal Control. In: Orszulik, S.T. (eds) Environmental Technology in the Oil Industry. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5472-3_5
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5472-3_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5471-6
Online ISBN: 978-1-4020-5472-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)