Summary
Counter pressure bending is a new precision bending method to solve many technical problems in V-shape bending. As the tension side of the material is compressed by the counter plate, most materials including hard and rather brittle materials, can be bent without fracture occuring even when bending to a right angle with zero nose radius. Also, the camber along the bending line and the distortion of the edge as observed in a conventional bent part, is decreased to a great extent by the addition of counter pressure. The bottom shape accuracy of the bent part is also improved. Bottom striking at the end of bending stroke can be omitted and hence spring back can be controlled easily by the adjustment of the press stroke.
Preview
Unable to display preview. Download preview PDF.
References
V. CUPKA, K. SUZUKI ans T. NAKAGAWA; Effect of Counter Pressure in V-type Bending, Proc. 23rd JNCPW, 93 (1972) (in Japanese).
T. NAKAGAWA, K. SUZUKI, A. TAKEZOE and T. TEZUKA; V Bending of as Cold Rolled Steel Sheet, Proc. 1975’s JSSPW, 133 (1975) (in Japanese).
V. CUPKA, H. MIYAMOTO, T. NAKAGAWA, T. MIYOSHI and K. SUZUKI; Analysis of Counter Pressure Bending by FEM, Proc. Int. Conf. Prod. Engg. 257 (1974) Tokyo.
T. NAKAGAWA, K. SUZUKI and K. KABEYA; Prevention of Camber in V Bending, Proc. 26th JNCPW, 189, (1975) (in Japanese).
T. TEZUKA, M. IWAMATSU, T. NAKAGAWA and K. SUZUKI; Newly Designed Press Brake for Counter Pressure Bending, Proc. 1976 JSCPW, 93 (1976) (in Japanese).
T. NAKAGAWA, K. SUZUKI, V. CUPKA and T.OHTSUKI: Counter Pressure Bending of Thick Steel Sheet, Proc. 1974 JSCPW, 279, (1974) (in Japanese).
K. SUZUKI and T. NAKAGAWA; Bending of the Sheet in its Plane, Proc. 25th JNCPW, 279, (1974) (in Japanese).
T. NAKAGAWA, K. SUZUKI and T. MACHIDA; Bending of Thermoplastic Sheet by Local Contact Heating, Jour. Japan Soc. for Tech. of Plasticity. Vol.16, No.172. 379 (1975)
(in Japanese).
* JNCPW : Japanese National Congress on Plastic Work.
* JSCPW : Japanese Spring Conference for Plastic Work.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1979 Department of Mechanical Engineering, University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Nakagawa, T., Cupka, V., Suzuki, K. (1979). Fine Bending With Counter Pressure. In: Davies, B.J. (eds) Proceedings of the Nineteenth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-81412-1_28
Download citation
DOI: https://doi.org/10.1007/978-1-349-81412-1_28
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-81414-5
Online ISBN: 978-1-349-81412-1
eBook Packages: Palgrave Social & Cultural Studies CollectionSocial Sciences (R0)