Advertisement

Choice of Wear-Criteria in Fully Automated Turning

  • A. Kinnander
Chapter

Summary

In automated metal-cutting a high degree of machining-reliability is required. The performance of the cutting tool is of essential importance. The traditional wear-criteria, flank wear and crater wear, is not well correlated to the frequency of process interruptions due to tool performance. A system for machining-monitoring should therefore be based on other process parameters. In the paper cutting force is discussed as controlling process parameter in fully automated turning.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A Kinnander (1979) Machining reliability in NC-turning Annals of CIRP vol 28 p 263–266Google Scholar
  2. 2.
    A Kinnander (1979) Size control in NC-turning (in Swedish) Verstäderna nr 7, 8 p 67–70 och 45–49Google Scholar
  3. 3.
    GF Micheletti, A De Fillipi and R Ippolito (1968) Tool wear and cutting forces in steel turning Annals of CIRP vol 16 p 353–360Google Scholar
  4. 4.
    B Lindström (1972) Technical and economic analysis of the importance of stability at cutting, especially turning (in Swedish) Dissartation Departement of Production Engineering, Royal Institute of Technology, Stockholm, SwedenGoogle Scholar
  5. 5.
    G Boothroyd and LE Reinhart (1973) Effect of chipformning devices on tool wear in metal cutting Proceedings NARCI Conference vol 2Google Scholar
  6. 6.
    A Del Taglia, S Purtunato and P Toni (1977) An approach to on line measurement of toolwear by spectrum analysis Proceedings of the seventeenth MTDR Conference p 141–197Google Scholar
  7. 7.
    MP Groover, RJ Karpovich and EK Levy (1977) A study of the relationship between remot thermocouple temperatures and toolwear in machining Int J Res vol 25 no 2 p 121–141Google Scholar
  8. 8.
    R Druminski, M Mainusch (1979) Automatisches Erhen en vangebrochenen und ungebrechenen Spanformen beim Drehen Industri Anzeiger nr 59 p 26–27Google Scholar

Copyright information

© Macmillan Publishers Limited 1982

Authors and Affiliations

  • A. Kinnander
    • 1
  1. 1.Department of Production EngineeringInstitute of TechnologyLinköpingSweden

Personalised recommendations