Summary
The paper discusses the basis for formulating standardised conditions for practical cutting tests to reveal the chatter performance of machine tools. The conditions proposed would also be applicable to vibration testing and analysis.
The proposed conditions have been derived by due consideration to machine utilization, workpiece statistics and tool life. Examples relating to centre lathes and horizontal milling and boring machines are presented.
The paper is based upon work conducted during an investigation sponsored by the Department of Trade and Industry of the Ministry of Aviation Supply.
Preview
Unable to display preview. Download preview PDF.
References
Specifications and Tests of Metal Cutting Machine Tools Machine Tool Engineering Division, UMIST.
SARWAR, M., ‘Determination of the cutting conditions for cutting tests of stability against chatter’, M.Sc. Dissertation, UMIST, January (1970).
OPITZ, H., ‘Cutting tests with cemented carbide tools’, Rep. 3.3 CIRP—OECD/Group. ‘C’, techincal university Aachen, (1964); ‘Behaviour of cemented carbides’, Rep. C6, CIRP—OECD/ Group ‘C’, Technical University Aachan (1966).
TLUSTY, J. and POLACEK, M., ‘Experiences with analysing stability of machine tools against chatter’, Proc. 9th MTDR. Conf., Birmingham (1968).
PERA, Survey of Turning Requirements in Industry.
PERA, Survey of Machining Requirements in Industry.
MTIRA, ‘The utilization of machine tools’, Res. Rep., No. 23 (1968).
Choosing the Right Carbide. Sandvik Coromant.
KOENIGSBERGER, F. and TLUSTY, J., Machine Tool Structures, Pergamon Press, Oxford (1970).
Cutting data for turning in non-interrupted dry cutting’, VDI Recommendation 3206, June (1965).
Cutting data for face milling of steel with carbide tools’, VDI Recommendation 3205, May (1960).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1972 Macmillan Publishers Limited
About this chapter
Cite this chapter
Burdekin, M., Cowley, A., Tlusty, J. (1972). Establishing Standard Cutting Conditions for Performance Testing Of Universal Metal Cutting Machine Tools. In: Koenigsberger, F., Tobias, S.A. (eds) Proceedings of the Twelfth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-01397-5_37
Download citation
DOI: https://doi.org/10.1007/978-1-349-01397-5_37
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-01399-9
Online ISBN: 978-1-349-01397-5
eBook Packages: EngineeringEngineering (R0)