Modeling and Optimization of Nano-finishing Processes

Part of the Springer Series in Advanced Manufacturing book series (SSAM)


Finishing operations represent a critical and expensive phase of overall production processes. The most labor intensive, uncontrollable area in the manufacturing of precision parts involves final finishing operations, which frequently demand as much as 15% of the total manufacturing cost. The dimensional and alignment accuracy and quality of surface finish are taken care of by finishing processes such as grinding, lapping, honing, and super-finishing (i.e. traditional methods of finishing). But, the applications of these traditional abrasive finishing processes are limited to the production of work pieces of basic forms such as flat, cylindrical, etc. These finishing processes are being pushed to their limits of performance especially in components of hard materials and complicated shapes. The need to develop finishing processes with wider bounds of application areas, better quality performance, higher productivity, and automatic operation has led to the development of nano-finishing processes.


Material Removal Material Removal Rate Work Piece Abrasive Particle Extrusion Pressure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    Ali-Tavoli M, Zadeh NN, Khakhali A, Mehran M (2006) Multi-objective optimization of abrasive flow machining processes using polynomial neural networks and genetic algorithms. Mach Sci Technol 10:1–20CrossRefGoogle Scholar
  2. 2.
    Bandyopadhyay BP, Ohmori H (1999) The effect of ELID grinding on the flexural strength of silicon nitride. Int J Mach Tools Manuf 39:839–853CrossRefGoogle Scholar
  3. 3.
    Bandyopadhyay BP, Ohmori H, Takahashi I (1996) Ductile regime mirror finish grinding of ceramics with electrolytic in-process dressing (ELID) grinding. Mater Manuf Proc 11:789–801CrossRefGoogle Scholar
  4. 4.
    Barletta M (2009) Progress in abrasive fluidized bed machining. J Mater Process Technol 209(20):6087–6102CrossRefGoogle Scholar
  5. 5.
    Bergh F, Engelbrecht AP (2006) A study of particle swarm optimization particle trajectories. Inf Sci 176:937–971zbMATHCrossRefGoogle Scholar
  6. 6.
    Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113:184–189CrossRefGoogle Scholar
  7. 7.
    Biswas I, Kumar AS, Rahman M (2010) A study on the equilibrium condition of the oxide layer in ELID grinding. Int J Abras Technol 3(1):7–12Google Scholar
  8. 8.
    Chang GW, Yan BH, Hsu RT (2002) Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives. Int J Mach Tools Manuf 42:575–583CrossRefGoogle Scholar
  9. 9.
    Das M, Jain VK, Ghoshdastidar PS (2008) Fluid flow analysis of magnetorheological abrasive flow finishing (MRAFF) process. Int J Mach Tools Manuf 48(3–4):415–426CrossRefGoogle Scholar
  10. 10.
    El-Taweel TA (2008) Modeling and analysis of hybrid electrochemical turning-magnetic abrasive finishing of 6061 Al/Al2O3 composite. Int J Adv Manuf Technol 37(7–8):705–714CrossRefGoogle Scholar
  11. 11.
    Fang L, Zhao J, Li B, Sun K (2009) Movement patterns of ellipsoidal particle in abrasive flow machining. J Mater Process Technol 209(20):6048–6056CrossRefGoogle Scholar
  12. 12.
    Fathima K, Kumar AS, Rahman M, Lim HS (2003) A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding. Wear 254:1247–1255CrossRefGoogle Scholar
  13. 13.
    Fathima K, Rahman M, Kumar AS, Lim HS (2007) Modeling of ultra-precision ELID grinding. J Manuf Sci Eng 129(2):296–302CrossRefGoogle Scholar
  14. 14.
    Fathima K, Schinhaerl M, Geiss A, Rascher R, Sperber P (2010) A knowledge based feed-back control system for precision ELID grinding. Precis Eng 34(10):124–132CrossRefGoogle Scholar
  15. 15.
    Fox M, Agrawal K, Shinmura T, Komanduri R (1994) Magnetic abrasive finishing of rollers. CIRP Ann Manuf Technol 43(1):181–184CrossRefGoogle Scholar
  16. 16.
    Fujihara K, Ohshiba K, Komatsu T, Ueno M, Ohmori H, Bandyopadhyay BP (1997) Precision surface grinding characteristics of ceramic matrix composites and structural ceramics with electrolytic inprocess dressing. Mach Sci Technol 1:81–94CrossRefGoogle Scholar
  17. 17.
    Gorana VK, Jain VK, Lal GK (2004) Experimental investigations into cutting forces and active grain density during abrasive flow machining. Int J Mach Tools Manuf 44:201–211CrossRefGoogle Scholar
  18. 18.
    Gorana VK, Jain VK, Lal GK (2006) Forces prediction during material deformation in abrasive flow machining. Wear 260:128–139CrossRefGoogle Scholar
  19. 19.
    Gorana VK, Jain VK, Lal GK (2006) Prediction of surface roughness during abrasive flow machining. Int J Adv Manuf Technol 31:258–267CrossRefGoogle Scholar
  20. 20.
    Im IT, Mun SD, Oh SM (2009) Micro machining of an STS 304 bar by magnetic abrasive finishing. J Mech Sci Technol 23(7):1982–1988CrossRefGoogle Scholar
  21. 21.
    Jain VK (2009) Magnetic field assisted abrasive based micro-/nano-finishing. J Mater Process Technol 209(20):6022–6038CrossRefGoogle Scholar
  22. 22.
    Jain VK (2000) Advanced machining processes. Allied Publishers, New DelhiGoogle Scholar
  23. 23.
    Jain VK, Adsul SG (2000) Experimental investigation into abrasive flow machining. Int J Mach Tools Manuf 40:1003–1021CrossRefGoogle Scholar
  24. 24.
    Jain RK, Jain VK (1999) Simulation of surface generated in abrasive flow machining process. Robotics Comput Integr Manuf 15:403–412CrossRefGoogle Scholar
  25. 25.
    Jain RK, Jain VK (2000) Optimum selection of machining conditions in abrasive flow machining using neural network. J Mater Process Technol 108:62–67CrossRefGoogle Scholar
  26. 26.
    Jain RK, Jain VK (2001) Specific energy and temperature determination in abrasive flow machining process. Int J Mach Tools Manuf 41:1689–1704CrossRefGoogle Scholar
  27. 27.
    Jain RK, Jain VK (2004) Stochastic simulation of active grain density in abrasive flow machining. J Mater Process Technol 152:17–22CrossRefGoogle Scholar
  28. 28.
    Jain NK, Jain VK, Jha S (2007) Parametric optimization of advanced fine-finishing processes. Int J Adv Manuf Technol 34:1191–1213CrossRefGoogle Scholar
  29. 29.
    Jain RK, Jain VK, Kalra PK (1999) Modeling of abrasive flow machining process: a neural network approach. Wear 231:242–248CrossRefGoogle Scholar
  30. 30.
    Jain RK, Jain VK, Dixit PM (1999) Modeling of material removal and surface roughness in abrasive flow machining process. Int J Mach Tools Manuf 39:1903–1923CrossRefGoogle Scholar
  31. 31.
    Jain VK, Kumar P, Behra PK, Jayswal SC (2001) Effect of working gap and cicumferential speed on the performance of magnetic abrasive finishing process. Wear 250:384–390CrossRefGoogle Scholar
  32. 32.
    Jain VK, Kumar R, Dixit PM, Sidpara A (2009) Investigations into abrasive flow finishing of complex workpieces using FEM. Wear 267(1–4):71–80CrossRefGoogle Scholar
  33. 33.
    Jayswal SC, Jain VK, Dixit PM (2005) Modeling and simulation of abrasive finishing process. Int J Adv Manuf Technol 26:477–490CrossRefGoogle Scholar
  34. 34.
    Jha S, Jain VK (2006) Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing (MRAFF) process. Wear 261(7–8):856–866CrossRefGoogle Scholar
  35. 35.
    Jha S, Jain VK (2004) Design and development of the magnetorheological abrasive flow finishing process. Int J Mach Tools Manuf 44:1019–1029CrossRefGoogle Scholar
  36. 36.
    Kar KK, Ravikumar NL, Tailor PB, Ramkumar J, Sathiyamoorthy D (2009) Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process. J Mater Process Technol 209(4):2212–2221CrossRefGoogle Scholar
  37. 37.
    Kato T, Ohmori H, Zhang C, Yamazaki T, Akune Y, Hokkirigawa K (2001) Improvement of friction and wear properties of CVD-SiC films with new surface finishing method ‘ELID-grinding. Key Eng Mater 196:91–101CrossRefGoogle Scholar
  38. 38.
    Kim J, Choi M (1995) Simulation for the prediction of surface-accuracy in magnetic abrasive machining. J Mater Process Technol 53:630–642MathSciNetCrossRefGoogle Scholar
  39. 39.
    Ko SL, Baron YM, Park JI (2007) Micro deburring for precision parts using magnetic abrasive finishing method. J Mater Process Technol 187–188:19–25CrossRefGoogle Scholar
  40. 40.
    Kumar G, Yadav V (2009) Temperature distribution in the workpiece due to plane magnetic abrasive finishing using FEM. Int J Adv Manuf Technol 41(11–12):1051–1058CrossRefGoogle Scholar
  41. 41.
    Kremen GZ, Elsayed EA, Rafalorich VI (1996) Mechanism of material removal in magnetic abrasive process and the accuracy of machining. Int J Prod Res 34(9):2629–2638zbMATHCrossRefGoogle Scholar
  42. 42.
    Kremen GZ, Elsayed EA, Ribeiro JL (1994) Machining time estimation for magnetic abrasive processes. Int J Prod Res 32(12):2817–2825zbMATHCrossRefGoogle Scholar
  43. 43.
    Kwak JS (2009) Enhanced magnetic abrasive polishing of non-ferrous metals utilizing a permanent magnet. Int J Mach Tools Manuf 49(7–8):613–618CrossRefGoogle Scholar
  44. 44.
    Lee ES (2000) A study on the mirror-like grinding of die steel with optimum in-process electrolytic dressing. J Mater Process Technol 100(1–3):200–208CrossRefGoogle Scholar
  45. 45.
    Lim HS, Ohmori H, Lin W, Qian J (2000) High productivity and high accuracy electrode-less ELID grinding on die material. J Mould Tehchnol 15:148–149Google Scholar
  46. 46.
    Lim HS, Ohmori H, Lin W, Qian J (2001) Electrode-less micro ELID grinding on die and mould material. Jpn Soc Grind Eng 45:298–303Google Scholar
  47. 47.
    Mali HS, Manna A (2010) Optimum selection of abrasive flow machining conditions during fine finishing of Al/15 wt% SiC-MMC using Taguchi method. Int J Adv Manuf Technol. doi: 10.1007/s00170-010-2565-y
  48. 48.
    Mayer JE, Fang GP (1994) Effect of grit depth of cut on strength of ground ceramic. CIRP Ann Manuf Technol 43(1):299–312CrossRefGoogle Scholar
  49. 49.
    Mollah AA, Pratihar DK (2008) Modeling of TIG welding and abrasive flow machining processes using radial basis function networks. Int J Adv Manuf Technol 37(9–10):937–952CrossRefGoogle Scholar
  50. 50.
    Mori T, Hirota K, Kawashima Y (2003) Clarification of magnetic abrasive finishing mechanism. J Mater Process Technol 143–144:682–686CrossRefGoogle Scholar
  51. 51.
    Ohmori H, Moriyasu S, Li W, Takahashi I, Park KY, Itoh N, Bandyopadhyay BP (1999) Highly efficient and precision fabrication of cylindrical parts from hard materials with the application of ELID (electrolytic in-process dressing). Mater Manuf Process 14:1–12CrossRefGoogle Scholar
  52. 52.
    Ohmori H, Nakagawa T (1990) Mirror surface grinding of silicon wafers with electrolytic in-process dressing. CIRP Ann Manuf Technol 39(1):329–333CrossRefGoogle Scholar
  53. 53.
    Ohmori H, Nakagawa T (1997) Utilization of nonlinear conditions in precision grinding with ELID (Electrolytic In-Process Dressing) for fabrication of hard material components. CIRP Ann Manuf Technol 46(1):261–264CrossRefGoogle Scholar
  54. 54.
    Qian J, Wei L, Ohmori H (2000) Cylindrical grinding of bearing steel with electrolytic in-process dressing. Precis Eng 24:153–159CrossRefGoogle Scholar
  55. 55.
    Rahman M, Kumar AS, Lim HS, Fatima K (2003) ELID grinding technique for nano finishing of brittle materials. SADHNA J Eng Sci Indian Acad Sci 28(5):1–18Google Scholar
  56. 56.
    Rajeshwar G, Kozak, Rajurkar KP (1994) Modeling and computer simulation of medium flow in abrasive flow machining process. In: Proceedings of International Mechanical Engineering Congress and Exposition. Chicago, PED 68:965–971Google Scholar
  57. 57.
    Rao RV, Pawar PJ (2010) Optimization of abrasive flow machining process parameters using artificial bee colony algorithm. In: Proceedings of International Conference on Advances in Mechanical Engineering. Surat, pp. 768–773Google Scholar
  58. 58.
    Rao RV, Pawar PJ, Davim JP (2009) Optimization of abrasive flow machining process parameters using particle swarm optimization and simulated annealing algorithms. In: Davim JP (ed) Artificial intelligence in manufacturing research. Nova Science Publications, New YorkGoogle Scholar
  59. 59.
    Rhoades LJ (1987) Abrasive flow machining with not-so-silly putty. Met Finish, 27–29 JulyGoogle Scholar
  60. 60.
    Rhoades LJ (1991) Abrasive flow machining: a case study. J Mater Process Technol 28:107–116CrossRefGoogle Scholar
  61. 61.
    Sankar MR, Mondal S, Ramkumar J, Jain VK (2009) Experimental investigations and modeling of drill bit-guided abrasive flow finishing (DBG-AFF) process. Int J Adv Manuf Technol 42(7–8):678–688CrossRefGoogle Scholar
  62. 62.
    Sankar MR, Ramkumar J, Jain VK (2009) Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process. Wear 266(7–8):688–698CrossRefGoogle Scholar
  63. 63.
    Shinmura T, Takazawa K, Hatano E, Matsunaga T (1990) Study in magnetic abrasive finishing. CIRP Ann Manuf Technol 39(1):325–328CrossRefGoogle Scholar
  64. 64.
    Singh DK, Jain VK, Raghuram V (2004) Parametric study of magnetic abrasive finishing process. J Mater Process Technol 149:22–29CrossRefGoogle Scholar
  65. 65.
    Singh S, Shan HS (2002) Development of magneto abrasive flow machining process. Int J Mach Tools Manuf 42:953–959CrossRefGoogle Scholar
  66. 66.
    Stephenson DJ, Hedge J, Corbett J (2002) Surface finishing of Ni–Cr–B–Si composite coatings by precision grinding. Int J Mach Tools Manuf 42:357–363CrossRefGoogle Scholar
  67. 67.
    Stephenson DJ, Veselovac D, Manley S, Corbett C (2001) Ultra-precision grinding of hard steels. Precis Eng 25:336–345CrossRefGoogle Scholar
  68. 68.
    Tonshoff HK, Peters I, Inasaki PT (1992) Modeling and simulation of grinding processes. CIRP Ann Manuf Technol 41(2):677–688CrossRefGoogle Scholar
  69. 69.
    Uhlmann E, Mihotovic V, Coenen A (2009) Modeling the abrasive flow machining process on advanced ceramic materials. J Mater Process Technol 209(20):6062–6066CrossRefGoogle Scholar
  70. 70.
    Venkatesh VC, Inasaki I, Toenshof HK, Nakagawa T, Marinescu ID (1995) Observations on polishing and ultraprecision machining of semiconductor substrate materials. CIRP Ann Manuf Technol 44:611–618CrossRefGoogle Scholar
  71. 71.
    Walia RS, Shan HS, Kumar P (2006) Parametric optimization of centrifugal force- assisted abrasive flow machining (CFAAFM) by the Taguchi method. Mater Manuf Process 21:375–382CrossRefGoogle Scholar
  72. 72.
    Walia RS, Shan HS, Kumar P (2006) Multi-response optimization of CFAAFM process through Taguchi method and utility concept. Mater Manuf Process 21:907–914CrossRefGoogle Scholar
  73. 73.
    Wang P, Shi Z, Xin Q (2000) Optical surface grinding of optical glasses with ELID grinding technique. Proc SPIE Int Soc Opt Eng 4231:509–514Google Scholar
  74. 74.
    Wani AM, Yadava V, Khatri A (2007) Simulation for the prediction of surface roughness in magnetic abrasive flow finishing (MAFF). J Mater Process Technol 190(1–3):282–290CrossRefGoogle Scholar
  75. 75.
    Williams RE (1998) Acoustic emission characteristics of abrasive flow machining. J Manuf Sci Eng 120:264–271CrossRefGoogle Scholar
  76. 76.
    Williams RE, Rajurkar KP (1992) Stochastic modeling and analysis of abrasive flow machining. J Eng Ind 144:74–81Google Scholar
  77. 77.
    Yamaguchi H, Shinmura T (2004) Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process. Precis Eng 28:135–142CrossRefGoogle Scholar
  78. 78.
    Yang LD, Lin CT, Chow HM (2009) Optimization in MAF operations using Taguchi parameter design for AISI304 stainless steel. Int J Adv Manuf Technol 42(5–6):595–605CrossRefGoogle Scholar
  79. 79.
    Zhang F, Li W, Qiu Z, Ohmori H (2000) Application of ELID grinding technique to precision machining of optics. Proc SPIE Int Soc Opt Eng 4231:218–223Google Scholar
  80. 80.
    Zhanga C, Ohmori H, Kato T, Morita N (2001) Evaluation of surface characteristics of ground CVDSiC using cast iron bond diamond wheels. Precis Eng 25:56–62CrossRefGoogle Scholar
  81. 81.
    Zhang B, Yang F, Wang J, Zhu Z, Monahan R (2000) Stock removal rate and workpiece strength in multi-pass grinding of ceramics. J Mater Process Technol 104:178–184CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Limited 2011

Authors and Affiliations

  1. 1.Mechanical Engineering DepartmentS.V. National Institute of TechnologySuratIndia

Personalised recommendations