Abstract
Machining operations have been the core of the manufacturing industry since the industrial revolution. Machining is a process of material removal using cutting tools and machine tools to accurately obtain the required product dimensions with good surface finish. The manufacturing industries strive to achieve either a minimum cost of production or a maximum production rate, or an optimum combination of both, along with better product quality in machining.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abburi NR, Dixit US (2006) A knowledge-based system for the prediction of surface roughness in turning process. Robot Comput Integr Manuf 22(4):363–372
Abrão AM, Faria PE, Rubio JC, Reis P, Davim JP (2007) Drilling of fiber reinforced plastics: a review. J Mater Process Technol 186(1–3):1–7
Abu-Mahfouz I (2003) Drilling wear detection and classification using vibration signals and artificial neural network. Int J Mach Tools Manuf 43:707–720
Agapiou JS (1992a) The optimization of machining operations based on a combined criterion-Part 2 Multi-pass operations. J Eng Ind 114:508–513
Agapiou JS (1992b) An optimization of multi-stage machining system, part I: Mathematical solution part 2: The algorithm and application. J Eng Ind 114:524–538
Agapiou JS (1992c) The optimization of machining operation based on a combined criterion, part I: The use of combined objectives in single-pass operations. J Eng Ind 114:500–507
Aggarwal A, Singh H, Kumar P, Singh M (2008) Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function. J Mater Process Technol 205(1–3):42–50
Ahearne E, Byrne G (2008) Simulation of the local kinematics in rotational grinding. CIRP Ann Manuf Technol 57(1):333–336
Alagumurthi N, Palaniradja K, Soundararajan V (2006) Optimization of grinding process through design of experiment (DOE): a comparative study. Mater Manuf Process 21(1):19–21
Al-Ahmari AMA (2007) Predictive machinability models for a selected hard material in turning operations. J Mater Process Technol 190(1–3):305–311
Al-Aomar R, Al-Okaily A (2006) A GA-based parameter design for single machine turning process with high-volume production. Comput Ind Eng 50(3):317–337
Ali YM, Zhang LC (2004) A fuzzy model for predicting burns in surface grinding of steel. Int J Mach Tools Manuf 44(5):563–571
Amiolemhen E, Ibhadode AOA (2004) Application of genetic algorithms—determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile. Int J Mach Tools Manuf 44(12–13):1403–1412
Amitay G (1981) Adaptive control optimization of grinding. J Eng Ind 103(1):103–108
António CAC, Davim JP (2002) Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model. Compos Part A Appl Sci Manuf 33(2):213–219
Armarego EJA, Smith AJR, Wang J (1994) Computer-aided constrained optimization analyses and strategies for multipass helical tooth milling operations. CIRP Ann Manuf Technol 43(1):437–442
Arul S, Raj DS, Vijayaraghavan L, Malhotra SK, Krishnamurthy R (2006) Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites. Mater Manuf Process 21(4):357–365
Arul S, Vijayaraghavan L, Malhotra SK (2007) Online monitoring of acoustic emission for quality control in drilling of polymeric composites. J Mater Process Technol 185(1–3):184–190
Aslan E, Camuscu N, Birgoren B (2007) Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3 + TiCN mixed ceramic tool. Mater Des 28:1618–1622
Asokan P, Baskar N, Babu K (2005) Optimization of surface grinding operations using particle swarm optimization technique. J Manuf Sci Eng 127(4):885–892
Audy J (2008) A study of computer-assisted analysis of effects of drill geometry and surface coating on forces and power in drilling. J Mater Process Technol 204(1–3):130–138
Aykut Ş, Gölcü M, Semiz S, Ergür HS (2007) Modeling of cutting forces as function of cutting parameters for face milling of satellite 6 using an artificial neural network. J Mater Process Technol 190(1–3):199–203
Baek DK, Ko TJ, Kim HS (2001) Optimization of feedrate in a face milling operation using a surface roughness model. Int J Mach Tools Manuf 41(3):451–462
Bağci E, Ozcelik B (2006a) Analysis of temperature changes on the twist drill under different drilling conditions based on Taguchi method during dry drilling of Al 7075–T651. Int J Adv Manuf Technol 29(7–8):629–636
Bağci E, Ozcelik B (2006b) Investigation of the effect of drilling conditions on the twist drill temperature during step-by-step and continuous dry drilling. Mater Des 27(6):446–454
Balaji AK, Ghosh R, Fang XD, Stevenson R, Jawahir IS (2006) Performance-based predictive models and optimization methods for turning operations and applications: part 2-Assessment of chip forms/chip breakability. J Manuf Process 8(2):144–158
Balykov AV (2003) Optimization of diamond drilling using an extreme experimental design. Glass Ceram 60(7–8):213–216
Bandyopadhyay S, Gokhale H, Sundar JKS, Sundararajan G, Joshi SV (2005) A statistical approach to determine process parameter impact in Nd:YAG laser drilling of IN718 and Ti-6Al-4V sheets. Opt Lasers Eng 43(2):163–182
Baro PK, Joshi SS, Kapoor SG (2005) Modeling of cutting forces in a face-milling operation with self-propelled round insert milling cutter. Int J Mach Tools Manuf 45(7–8):831–839
Basak H, Goktas HH (2009) Burnishing process on al-alloy and optimization of surface roughness and surface hardness by fuzzy logic. Mater Des 30(4):1275–1281
Basak S, Dixit US, Davim JP (2007) Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked steel with a ceramic tool. Proc Inst Mech Eng Part B J Eng Manuf 221:987–998
Basavarajappa S, Chandramohan G, Davim JP (2008) Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques. J Mater Process Technol 196(1–3):332–338
Baskar N, Asokan P, Saravanan R, Prabhaharan G (2006) Selection of optimal machining parameters for multi-tool milling operations using a memetic algorithm. J Mater Process Technol 174:239–249
Baykasoglu A, Dereli T (2002) Novel algorithm approach to generate the ‘number of passes’ and ‘depth of cuts’ for the optimization routines of multi pass machining. Int J Prod Res 40:1549–1565
Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi’s design of experiments. Robot Comput Integr Manuf 18(5–6):343–354
Bhattacharyya K, Mukherjee A (2006) Modeling and simulation of centerless grinding of ball bearings. Simul Modell Pract Theory 14(7):971–988
Bigerelle M, Hagege B, El-Mansori M (2008) Mechanical modeling of micro-scale abrasion in superfinish belt grinding. Tribol Int 41(11):992–1001
Biglari FR, Fang XD (1995) Real-time fuzzy logic control for maximizing the tool life of small-diameter drills. Fuzzy Sets Syst 72:91–101
Bouacha K, Yallese MA, Mabrouki T, Rigal JF (2010) Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. Int J Refra Met Hard Mater 28(3):349–361
Bouzid W (2005) Cutting parameter optimization to minimize production time in high speed turning. J Mater Process Technol 161(3):388–395
Brinksmeier E, Tonshoff HK, Czenkusch C, Heinzel C (1998) Modeling and optimization of grinding processes. J Intell Manuf 9:303–314
Brinksmeier E, Aurich JC, Govekar E, Heinzel C, Hoffmeister HW, Klocke F, Peters J, Rentsch R, Stephenson DJ, Uhlmann E, Weinert K, Wittmann M (2006) Advances in modeling and simulation of grinding processes. CIRP Ann Manuf Technol 55(2):667–696
Brinksmeier E, Heinzel C, Bleil N (2009) Superfinishing and grind-strengthening with elastic bonding system. J Mater Process Technol 209(20):6117–6123
Budak E, Tekeli A (2005) Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs. CIRP Ann Manuf Technol 54(1):353–356
Budak E, Ozturk E, Tunc LT (2009) Modeling and simulation of 5-axis milling processes. CIRP Ann Manuf Technol 58(1):347–350
Cakir MC, Gurarda A (1998) Optimization and graphical representation of machining conditions in multi-pass turning operations. Comput Integr Manuf Syst 11(3):157–170
Cakir MC, Gurarda A (2000) Optimization of machining conditions for multi-tool milling operations. Int J Prod Res 38(15):3537–3552
Chakraborty P, Asfour S, Cho S, Onar A, Lynn M (2008) Modeling tool wear progression by using mixed effects modeling technique when end-milling AISI 4340 steel. J Mater Process Technol 205(1–3):190–202
Chandrasekaran M, Muralidhar M, Krishna CM, Dixit US (2010) Application of soft computing techniques in machining performance prediction and optimization: a literature review. Int J Adv Manuf Technol 46(5–8):445–464
Chang PC, Hsieh JC, Wang CY (2007) Adaptive multi-objective genetic algorithms for scheduling of drilling operation in printed circuit board industry. Appl Soft Comput 7(3):800–806
Chang SH, Farris TN, Chandrasekar S (2008) Experimental analysis on evolution of superfinished surface texture. J Mater Process Technol 203(1–3):365–371
Chen MC (2004) Optimizing machining economics models of turning operations using the scatter search approach. Int J Prod Res 42:2611–2625
Chen MC , Chen KY (2003) Optimization of multipass turning operations with genetic algorithms: a note. Int J Prod Res 41(14):3385–3388
Chen JC, Savage M (2001) A fuzzy-net-based multilevel in-process surface roughness recognition system in milling operations. Int J Adv Manuf Technol 17(9):670–676
Chen MC, Tsai DM (1996) A simulated annealing approach for optimization of multi-pass turning operations. Int J Prod Res 34(10):2803–2825
Chen YH, Lee YS, Fang SC (1998) Optimal cutter selection and machining plane determination for process planning and NC machining of complex surfaces. J Manuf Syst 17(5):371–388
Chen C, Sakai S, Inasaki I (1991) Lapping of advanced ceramics. Mater Manuf Process 6(2):211–226
Chien WT, Tsai CS (2003) The investigation on the prediction of tool wear and determination of optimum cutting conditions in machining 17-4PH stainless steel. J Mater Process Technol 140(1–3):340–345
Ching-Kao C, Lu HS (2007) The optimal cutting-parameter selection of heavy cutting process in side milling for SUS304 stainless steel. Int J Adv Manuf Technol 34(5–6):440–447
Choi JG, Yang MY (1999) In-process prediction of cutting depths in end milling. Int J Mach Tools Manuf 39(5):705–721
Choi TJ, Subrahmanya N, Li H, Shin YC (2008a) Generalized practical models of cylindrical plunge grinding processes. Int J Mach Tools Manuf 48(1):61–72
Choi YJ, Park MS, Chu CN (2008b) Prediction of drill failure using features extraction in time and frequency domains of feed motor current. Int J Mach Tools Manuf 48:29–39
Chua MS, Loh HT, Wong YS, Rahman M (1991) Optimization of cutting conditions for multi-pass turning operations using sequential quadratic programming. J Mater Process Technol 28(1–2):253–262
Cus F, Balic J (2003) Optimization of cutting process by GA approach. Robot Comput Integr Manuf 19:113–121
Cus F, Milfelner M, Balic J (2006) An intelligent system for monitoring and optimization of ball-end milling process. J Mater Process Technol 175(1–3):90–97
Davim JP (2001) A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments. J Mater Process Technol 116(2–3):305–308
Davim JP (2003) Design of optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays. J Mater Process Technol 132:340–344
Davim JP, António CAC (2001a) Optimal drilling of particulate metal matrix composites based on experimental and numerical procedures. Int J Mach Tools Manuf 41(1):21–31
Davim JP, António CAC (2001b) Optimization of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model. J Mater Process Technol 112(1):78–82
Davim JP, Gaitonde VN, Karnik SR (2008) Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models. J Mater Process Technol 205(1–3):16–23
de Lacalle LNL, Lamikiz A, Sánchez JA, Arana JL (2007) The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces. Int J Adv Manuf Technol 32(9–10):958–968
Dhavalikar MN, Kulkarni MS, Mariappan V (2003) Combined Taguchi and dual response method for optimization of a centerless grinding operation. J Mater Process Technol 132:90–94
Doman DA, Warkentin A, Bauer R (2009) Finite element modeling approaches in grinding. Int J Mach Tools Manuf 49(2):109–116
Drazumeric R, Krajnik P, Vrabic R, Meyer B, Butala P, Kosel F, Kopac J (2010) Modeling of grinding gap macro geometry and workpiece kinematics in throughfeed centreless grinding. J Mater Process Technol 210(1):104–109
Dubey AK (2008a) A hybrid approach for multi-performance optimization of the electro chemical honing process. Int J Adv Manuf Technol. doi:10.1007/s00170-008-1422-8
Dubey AK (2008b) Multi-performance modeling and optimization control strategies for electro chemical honing: a critical evaluation. Int J Adv Manuf Technol. doi:10.1007/s00170-008-1477-6
Dubey AK (2009) Multi-response optimization of electro chemical honing using utility-based Taguchi approach. Int J Adv Manuf Technol 41(7–8):749–759
Dutta RK, Paul S, Chattopadhyay AB (2006) The efficacy of back propagation neural network with delta bar delta learning in predicting the wear of carbide inserts in face milling. Int J Adv Manuf Technol 31(5–6):434–442
Dvivedi A, Kumar P (2007) Surface quality evaluation in ultrasonic drilling through the Taguchi technique. Int J Adv Manuf Technol 34(1–2):131–140
Ee KC, Li PX, Balaji AK, Jawahir IS, Stevenson R (2006) Performance-based predictive models and optimization methods for turning operations and applications: part 1. Tool wear/tool life in turning with coated grooved tools. J Manuf Process 8(1):54–66
Elhachimi M, Torbaty S, Joyot P (1999) Mechanical modeling of high speed drilling. 1: predicting torque and thrust. Int J Mach Tools Manuf 39(4):553–568
El-Mounayri H, Kishawy H, Briceno J (2005) Optimization of CNC ball end milling: a neural network-based model. J Mater Process Technol 166(1):50–62
El-Taweel TA, El-Axir MH (2009) Analysis and optimization of the ball burnishing process through the Taguchi technique. Int J Adv Manuf Technol 41(3–4):301–310
El-Tayeb NSM, Low KO, Brevern PV (2008) Enhancement of surface quality and tribological properties using ball burnishing process. Mach Sci Tech 12(2):234–248
El-Wahab AI, Abdelhay AM (1998) A new algorithm and tool design for CNC profile burnishing. Int J Prod Res 36(7):1977–1985
Ertunc HM, Loparo KA, Ocak H (2001) Tool wear condition monitoring in drilling operations using hidden Markov models (HMMs). Int J Mach Tools Manuf 41(9):1363–1384
Feng CX, Wang X (2002) Development of empirical models for surface roughness prediction in finish turning. Int J Adv Manuf Technol 20:348–356
Feng CX, Wang X, Yu Z (2002) Neural networks modeling of honing surface roughness parameters defined by ISO 13565. J Manuf Syst 21(5):395–408
Feng CXJ, Yu ZGS, Wang JHJ (2005) Validation and data splitting in predictive regression modeling of honing surface roughness data. Int J Prod Res 43(8):1555–1571
Fernandes M, Cook C (2006) Drilling of carbon composites using a one shot drill bit. Part II: empirical modeling of maximum thrust force. Int J Mach Tools Manuf 46(1):76–79
Fernandes MH, Garitaonandia I, Albizuri J, Hernández JM, Barrenetxea D (2009) Simulation of an active vibration control system in a centerless grinding machine using a reduced updated FE model. Int J Mach Tools Manuf 49(3–4):239–245
Fontaine M, Moufki A, Devillez A, Dudzinski D (2007a) Modeling of cutting forces in ball-end milling with tool–surface inclination: Part I. Predictive force model and experimental validation. J Mater Process Technol 189:73–84
Fontaine M, Devillez A, Moufki A, Dudzinski D (2007b) Modeling of cutting forces in ball-end milling with tool–surface inclination: Part II. Influence of cutting conditions, run-out, ploughing and inclination angle. J Mater Process Technol 189(1–3):85–96
Gaitonde VN, Karnik SR, Achyutha BT, Siddeswarappa B (2007) Methodology of Taguchi optimization for multi-objective drilling problem to minimize burr size. Int J Adv Manuf Technol 34(1–2):1–8
Gaitonde VN, Karnik SR, Achyutha BT, Siddeswarappa B (2008a) Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multi-performance objective based on membership function. J Mater Process Technol 202(1–3):374–379
Gaitonde VN, Karnik SR, Achyutha BT, Siddeswarappa B (2008b) Genetic algorithm-based burr size minimization in drilling of AISI 316L stainless steel. J Mater Process Technol 197(1–3):225–236
Gaitonde VN, Karnik SR, Davim JP (2008c) Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept. J Mater Process Technol 196(1–3):73–78
Gaitonde VN, Karnik SR, Davim JP (2008d) Prediction and minimization of delamination in drilling of medium-density fiberboard (MDF) using response surface methodology and taguchi design. Mater Manuf Processes 23(4):377–384
Gaitonde VN, Karnik SR, Rubio JC, Correia AE, Abrão AM, Davim JP (2008e) Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. J Mater Process Technol 203(1–3):431–438
Gaitonde VN, Karnik SR, Davim JP (2009) Multiperformance optimization in turning of free-machining steel using taguchi method and utility concept. J Mater Eng Perform 18(3):231–236
Garg S, Pal SK, Chakraborty D (2007) Evaluation of the performance of back propagation and radial basis function neural networks in predicting the drill flank wear. Neural Comput Appl 16:407–417
Ghaiebi H, Solimanpur M (2007) An ant algorithm for optimization of hole-making operations. Comput Ind Eng 52:308–319
Ghani JA, Choudhury IA, Hassan HH (2004) Application of Taguchi method in the optimization of end milling parameters. J Mater Process Technol 145(1):84–92
Ghosh N, Ravi YB, Mukhopadyay S, Paul S, Mohanty AR, Chattopadyay AB (2007) Estimation of tool wear during CNC milling using neural network-based sensor fusion. Mech Syst Signal Process 21:466–479
Gómez MP, Hey AM, Ruzzante JE, D’Attellis CE (2010) Tool wear evaluation in drilling by acoustic emission. Phys Procedia 3(1):819–825
Gopal AV, Rao PV (2003) Selection of optimum conditions for maximum material removal rate with surface finish and damage as constraints in SiC grinding. Int J Mach Tools Manuf 43(13):1327–1336
Gopalakrishnan B, Al-Khayyal F (1991) Machine parameter selection for turning with constraints: an analytical approach based on geometric programming. Int J Prod Res 29(9):1897–1908
Govindhasamy JJ, McLoone SF, Irwin GW, French JJ, Doyle RP (2005) Neural modeling, control and optimization of an industrial grinding process. Control Eng Pract 13(10):1243–1258
Guevarra DS, Kyusojin A, Isobe H, Kaneko Y (2002) Development of a new lapping method for high precision ball screw (2nd report): design and experimental study of an automatic lapping machine with in-process torque monitoring system. Precis Eng 26(4):389–395
Guibert N, Paris H, Rech J, Claudin C (2009) Identification of thrust force models for vibratory drilling. Int J Mach Tools Manuf 49(9):730–738
Guo YB, Zhang Y, Zhong JA, Syoji K (2002) Optimization of honing wheel structure parameters in ultra-precision plane honing. J Mater Process Technol 129(1–3):96–100
Guo C, Campomanes M, Mcintosh D, Becze C, Gree S, Malkin S (2003) Optimization of continuous dress creep-feed form grinding process. CIRP Ann Manuf Technol 52(1):259–262
Guo C, Campomanes M, Mcintosh D, Becze C, Malkin S (2004) Model-based monitoring and control of continuous dress creep-feed form grinding. CIRP Ann Manuf Technol 53(1):263–266
Gupta R, Batra JL, Lal GK (1995) Determination of optimal subdivision of depth of cut in multi-pass turning with constraints. Int J Prod Res 33(9):2555–2565
Gupta R, Shishodia KS, Sekhon GS (2001) Optimization of grinding process parameters using enumeration method. J Mater Process Technol 112(1):63–67
Gurel S, Akturk MS (2007) Considering manufacturing cost and scheduling performance on a CNC turning machine. Eur J Oper Res 177(1):325–343
Haber RE, Haber-Haber R, Jiménez A, Galán R (2009) An optimal fuzzy control system in a network environment based on simulated annealing-an application to a drilling process. Appl Soft Comput 9(3):889–895
Haq AN, Marimuthu P, Jeyapaul R (2008) Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method. Int J Adv Manuf Technol 37(3–4):250–255
Hashimoto F, Lahoti GD (2004) Optimization of set-up conditions for stability of the centerless grinding process. CIRP Ann Manuf Technol 53(1):271–274
Hashmi K, Graham ID, Mills B (2000) Fuzzy logic based data selection for the drilling process. J Mater Process Technol 108:55–61
Hassan AM, Sulieman AD (1999) Improvement in the wear resistance of brass components by the ball burnishing process. J Mater Process Technol 96(1–3):73–80
Hassan AM, Al-Jalil HF, Ebied AA (1998) Burnishing force and number of ball passes for the optimum surface finish of brass components. J Mater Process Technol 83:176–179
Heisel U, Luik M, Eisseler R, Schaal M (2005) Prediction of parameters for the burr dimensions in short-hole drilling. CIRP Ann Manuf Technol 54(1):79–82
Hekman KA, Liang SY (1999) Feed rate optimization and depth of cut control for productivity and part parallelism in grinding. Mechatronics 9(5):447–462
Ho WH, Tsai JT, Lin BT, Chou JH (2009) Adaptive network-based fuzzy inference system for prediction of surface roughness in end milling process using hybrid Taguchi-genetic learning algorithm. Expert Syst Appl 36(2):3216–3222
Horng JT, Chiang KT (2008) A grey and fuzzy algorithms integrated approach to the optimization of turning Hadfield steel with Al2O3/TiC mixed ceramic tool. J Mater Process Technol 207(1–3):89–97
Hui YV, Leung LC, Linn R (2001) Optimal machining conditions with cost of quality and tool maintenance for turning. Int J Prod Res 39(4):647–665
Hundt W, Kuster F, Rehsteiner F (1997) Model-based AE monitoring of the grinding process. CIRP Ann Manuf Technol 46(1):243–247
Ibrahim AA, Rabbo SMA, El-Axir MH, Ebied AA (2009) Center rest balls burnishing parameters adaptation of steel components using fuzzy logic. J Mater Process Technol 209(5):2428–2435
Iliescu D, Gehin D, Gutierrez ME, Girot F (2010) Modeling and tool wear in drilling of CFRP. Int J Mach Tools Manuf 50(2):204–213
Inasaki I (1991) Monitoring and optimization of internal grinding process. CIRP Ann Manuf Technol 40(1):359–362
Iqbal A, Dar NU, He N, Hammouda MMI, Li L (2009) Self-developing fuzzy expert system: a novel learning approach, fitting for manufacturing domain. J Intell Manuf 31(5–6):434–442. doi:10.1007/s10845-009-0252-3l
Jadoun RS, Kumar P, Mishra BK (2009) Taguchi’s optimization of process parameters for production accuracy in ultrasonic drilling of engineering ceramics. Prod Eng 3(3):243–253
Jawahir IS, Wang X (2007) Development of hybrid predictive models and optimization techniques for machining operations. J Mater Process Technol 185(1–3):46–59
Jayakumar T, Mukhopadhyay CK, Venugopal S, Mannan SL, Raj B (2005) A review of the application of acoustic emission techniques for monitoring forming and grinding processes. J Mater Process Technol 159(1):48–61
Jiang Q, Ge Z (2002) Simulation on topography of superfinished roller surfaces. Sci China B: Chem 45(2):122–126
Jiao Y, Lei S, Pei ZJ, Lee ES (2004) Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations. Int J Mach Tools Manuf 44(15):1643–1651
Johansen L, Lund E (2009) Optimization of laminated composite structures using delamination criteria and hierarchical models. Struct Multidiscip Optim 38(4):357–375
Kadirgama K, Abou-El-Hossein KA, Mohammad B, Habeeb H (2007) Statistical model to determine surface roughness when milling hastelloy C-22HS. J Mech Sci Technol 21(10):1651–1655
Karnik SR, Gaitonde VN, Rubio JC, Correia AE, Abrão AM, Davim JP (2008) Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model. Mater Des 29(9):1768–1776
Karpat Y, Özel T (2007) Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization. Int J Adv Manuf Technol 35(3–4):234–247
Karthikeyan R, Jaiganesh S, Pai BC (2002) Optimization of drilling characteristics for Al/SiCp composites using fuzzy/GA. Metals Mater Int 8(2):163–168
Kee PK (1996) Development of constrained optimization analyses and strategies for multi-pass rough turning operations. Int J Mach Tools Manuf 36(1):115–127
Kersting P, Zabel A (2009) Optimizing NC-tool paths for simultaneous five-axis milling based on multi-population multi-objective evolutionary algorithms. Adv Eng Softw 40(6):452–463
Khajavi AN, Komanduri R (1993) On multisensor approach in drill wear monitoring. CIRP Ann Manuf Technol 42:71–74
Kiliç SE, Cogun C, Şen DT (1993) A computer-aided graphical technique for the optimization of machining conditions. Comput Ind 22(3):319–326
Kilickap E (2010a) Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite. Expert Syst Appl 37(8):6116–6122
Kilickap E (2010b) Modeling and optimization of burr height in drilling of Al-7075 using Taguchi method and response surface methodology. Int J Adv Manuf Technol. doi:10.1007/s00170-009-2469-x
Kim GH (2002) Evaluation of pre-estimation model to the in process surface roughness for grinding operations. Int J Korean Soc Precis Eng 3:24–30
Kim HY, Ahn JH (2002) Chip disposal state monitoring in drilling using neural network based spindle motor power sensing. Int J Mach Tools Manuf 42(10):1113–1119
Kim JD, Choi MS (1995a) A study on the optimization of the cylindrical lapping process for engineering fine-ceramics (Al2O3) by the statistical design method. J Mater Process Technol 52(2–4):368–385
Kim JD, Choi MS (1995b) Stochastic approach to experimental analysis of cylindrical lapping process. Int J Mach Tools Manuf 35(1):51–59
Kim D, Ramulu M (2004) Drilling process optimization for graphite/bismaleimide–titanium alloy stacks. Compos Struct 63(1):101–114
Kim J, Min S, Dornfeld DA (2001) Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts. Int J Mach Tools Manuf 41(7):923–936
Kim SS, Kim IH, Mani V, Kim HJ (2008) Real-coded genetic algorithm for machining condition optimization. Int J Adv Manuf Technol 38:884–895
Kolahan F, Liang M (1996) A tabu search approach to optimization of drilling operations. Comput Ind Eng 31(1–2):371–374
Korzynski M (2007) Modeling and experimental validation of the force–surface roughness relation for smoothing burnishing with a spherical tool. J Mach Tools Manuf 47:1956–1964
Korzynski M, Pacana A (2010) Centreless burnishing and influence of its parameters on machining effects. J Mater Process Technol 210(9):1217–1223
Kovacic M, Balic J, Brezocnik M (2004) Evolutionary approach for cutting forces prediction in milling. J Mater Process Technol 155–156:1647–1652
Krishna AG (2007) Optimization of surface grinding operations using a differential evolution approach. J Mater Process Technol 183:202–209
Kuar AS, Doloi B, Bhattacharya B (2006) Modeling and analysis of pulsed Nd:YAG laser machining characteristics during micro-drilling of zirconia (ZrO2). Int J Mach Tools Manuf 46(12–13):1301–1310
Kurt M, Bağci E, Kaynak Y (2009) Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes. Int J Adv Manuf Technol 40(5–6):458–469
Kwak JS (2005) Application of Taguchi and response surface methodologies for geometric error in surface grinding process. Int J Mach Tools Manuf 45(3):327–334
Kwon Y, Fischer GW, Tseng TL (2002) Fuzzy neuron adaptive modeling to predict surface roughness under process variations in CNC turning. J Manuf Syst 21(6):440–450
Langella A, Nele L, Maio A (2005) A torque and thrust prediction model for drilling of composite materials. Compos Part A Appl Sci Manuf 36(1):83–93
Laouar L, Hamadache H, Saad S, Bouchelaghem A, Mekhilef S (2009) Mechanical surface treatment of steel-Optimization parameters of regime. Phys Procedia 2(3):1213–1221
Lauderbaugh LK (2009) Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach. J Mater Process Technol 209(4):1909–1919
Lee CW, Shin YC (2000) Evolutionary modeling and optimization of grinding process. Int J Prod Res 38(12):2787–2813
Lee BY, Tarng YS (2000) Cutting-parameter selection for maximizing production rate or minimizing production cost in multistage turning operations. J Mater Process Technol 105(1–2):61–66
Lee SG, Tam SC, Loh NH (1993) Ball burnishing of 316 l stainless steel. J Mater Process Technol 37:241–251
Lee BY, Liu HS, Tarng YS (1998) Modeling and optimization of drilling process. J Mater Process Technol 74(1–3):149–157
Li XP, Li HZ (2004) Theoretical modeling of cutting forces in helical end milling with cutter runout. Int J Mech Sci 46(9):1399–1414
Li HZ, Zhang WB, Li XP (2001) Modeling of cutting forces in helical end milling using a predictive machining theory. Int J Mech Sci 43(8):1711–1730
Li GF, Wang LS, Yang LB (2002) Multi-parameter optimization and control of the cylindrical grinding process. J Mater Process Technol 129(1–3):232–236
Liang M, Mgwatu M, Zuo M (2001) Integration of cutting parameter selection and tool adjustment decision for multi-pass turning. Int J Adv Manuf Technol 17:861–869
Liao TW, Chen LJ (1994) A neural network approach for grinding processes: Modeling and optimization. Int J Mach Tools Manuf 34(7):919–937
Lin SC, Ting CJ (1999) Drill wear monitoring using neural networks. Int J Adv Manuf Technol 36:465–475
Liu X, Cheng K (2005) Modeling the machining dynamics of peripheral milling. Int J Mach Tools Manuf 45(11):1301–1320
Liu HS, Lee BY, Tarang YS (2000) In-process prediction of corner wear in drilling operations. Int J Adv Manuf Technol 101:152–158
Liu Q, Chen X, Wang Y, Gindy N (2008) Empirical modeling of grinding force based on multivariate analysis. J Mater Process Technol 203(1–3):420–430
Lizarralde R, Barrenetxea D, Gallego I, Marquinez JI, Bueno R (2005) Practical application of new simulation methods for the elimination of geometric instabilities in centerless grinding. CIRP Ann Manuf Technol 54(1):273–276
Lo SP (2003) An adaptive-network based fuzzy inference system for prediction of workpiece surface roughness in end milling. J Mater Process Technol 142(3):665–675
Loh NH, Tam SC, Miyazawa S (1989a) A study of the effects of ball-burnishing parameters on surface roughness using factorial design. J Mech Work Technol 18:53–61
Loh NH, Tam SC, Miyazawa S (1989b) Optimization of the surface finish produced by ball burnishing. J Mech Work Technol 19(1):101–107
Lu HS, Chang CK, Hwang NC, Chung CT (2009) Grey relational analysis coupled with principal component analysis for optimization design of the cutting parameters in high-speed end milling. J Mater Process Technol 209(8):3808–3817
Mahdy MAM (2001) Economic drilling conditions for a given deburring radius. J Mater Process Technol 110(2):197–205
Mani A, Patvardhan C (2010) Solving ceramic grinding optimization problem by adaptive quantum evolutionary algorithm. In: Proceedings of international conference intelligence system, model simulation, Liverpool, pp 43–48
Manna A, Bhattacharyya B (2004) Investigation for optimal parametric combination for achieving better surface finish during turning of Al/SiC-MMC. Int J Adv Manuf Technol 23:658–665
Manna A, Salodkar S (2008) Optimization of machining conditions for effective turning of E0300 alloy steel. J Mater Process Technol 203(1–3):147–153
Mauch CA, Lauderbaugh LK (1991) Modeling the drilling process—an analytical model to predict thrust force and torque. Precis Eng 13(3):233
Merdol SD, Altintas Y (2008) Virtual cutting and optimization of three-axis milling processes. Int J Mach Tools Manuf 48(10):1063–1071
Messaoud A, Weihs C (2009) Monitoring a deep hole drilling process by nonlinear time series modeling. J Sound Vib 321(3–5):620–630
Michael PC, Saka N, Rabinowicz E (1998) Burnishing and adhesive wear of an electrically conductive polyester-carbon film. Wear 132:265–285
Mohan NS, Kulkarni SM, Ramachandra A (2007) Delamination analysis in drilling process of glass fibre reinforced plastic (GFRP) composite materials. J Mater Process Technol 186(1–3):265–271
Molinari A, Nouari M (2002) Modeling of tool wear by diffusion in metal cutting. Wear 252(1–2):135–149
Mukherjee I, Ray PK (2006) A review of optimization techniques in metal cutting processes. Comput Ind Eng 50(1–2):15–34
Mukherjee I, Ray PK (2008a) A systematic solution methodology for inferential multivariate modeling of industrial grinding process. J Mater Process Technol 196(1–3):379–392
Mukherjee I, Ray PK (2008b) Optimal process design of two-stage multiple responses grinding processes using desirability functions and metaheuristic technique. Appl Soft Comput 8(1):402–421
Muthukrishnan N, Davim JP (2009) Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. J Mater Process Technol 209(1):225–232
Nalbant M, Gökkaya H, Sur G (2007) Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Mater Des 28(4):1379–1385
Nandi AK, Banerjee MK (2005) FBF-NN-based modeling of cylindrical plunge grinding process using a GA. J Mater Process Technol 162–163:655–664
Nandi AK, Davim JP (2009) A study of drilling performances with minimum quantity of lubricant using fuzzy logic rules. Mechatronics 19:218–232
Nandi AK, Pratihar DK (2004a) Automatic design of fuzzy logic controller using a genetic algorithm—to predict power requirement and surface finish in grinding. J Mater Process Technol 148(3):288–300
Nandi AK, Pratihar DK (2004b) An expert system based on FBFN using a GA to predict surface finish in ultra-precision turning. J Mater Process Technol 155–156:1150–1156
Natarajan U, Saravanan R, Periasamy VM (2006) Application of particle swarm optimization in artificial neural network for prediction of tool life. Int J Adv Manuf Technol 28:1084–1088
Neagu-Ventzel S, Cioc S, Marinescu I (2006) A wear model and simulation of superfinishing process: analysis for the superfinishing of bearing rings. Wear 260(9–10):1061–1069
Nian CY, Yang WH, Tarng YS (1999) Optimization of turning operations with multiple performance characteristics. J Mater Process Technol 95(1–3):90–96
Nouari M, List G, Girot F, Gehin D (2005) Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys. Int J Mach Tools Manuf 45(12–13):1436–1442
Ojha DK, Dixit US, Davim JP (2009) A soft computing based optimization of multi-pass turning processes. Int J Mater Prod Technol 35:145–166
Öktem H, Erzurumlu T, Çöl M (2006) A study of the Taguchi optimization method for surface roughness in finish milling of mold surfaces. Int J Adv Manuf Technol 28(7–8):694–700
Onwubolu GC (2006a) Selection of drilling operations parameters for optimal tool loading using integrated response surface methodology: a Tribes approach. Int J Prod Res 44(5):959–980
Onwubolu GC (2006b) Performance-based optimization of multi-pass face milling operations using tribes. Int J Mach Tools Manuf 46:717–727
Onwubolu GC (2009) Prediction of burr formation during face milling using a hybrid GMDH network model with optimized cutting conditions. Int J Adv Manuf Technol 44(11–12):1083–1093
Onwubolu GC, Clerc M (2004) Optimal path for automated drilling operations by a new heuristic approach using particle swarm optimization. Int J Prod Res 42(3):473–491
Onwubolu GC, Kumalo T (2001a) Optimization of multipass turning operations with genetic algorithms. Int J Prod Res 39(16):3727–3745
Onwubolu GC, Kumalo T (2001b) Multi-pass turning operations optimization based on genetic algorithms. Proc Inst Mech Eng Part B J Eng Manuf 215:117–124
Onwubolu GC, Kumar S (2006) Response surface methodology-based approach to CNC drilling operations. J Mater Process Technol 171(1):41–47
Onwubolu GC, Buryan P, Lemke F (2008) Modeling tool wear in end-milling using enhanced GMDH learning networks. Int J Adv Manuf Technol 39(11–12):1080–1092
Ozcelik B, Bağci E (2006) Experimental and numerical studies on the determination of twist drill temperature in dry drilling: a new approach. Mater Des 27(10):920–927
Ozcelik B, Oktem H, Kurtaran H (2005) Optimum surface roughness in end milling Inconel 718 by coupling neural network model and genetic algorithm. Int J Adv Manuf Technol 27(3–4):234–241
Pa PS (2007) Design of freeform surface finish using burnishing assistance following electrochemical finishing. J Mech Sci Technol 21(10):1630–1636
Paiva AP, Ferreira JR, Balestrassi PP (2007) A multivariate hybrid approach applied to AISI 52100 hardened steel turning optimization. J Mater Process Technol 189(1–3):26–35
Pal SK, Chakraborty D (2005) Surface roughness prediction in turning using artificial neural network. Neural Comput Appl 14:319–324
Palanisamy P, Rajendran I, Shanmugasundaram S (2007) Optimization of machining parameters using genetic algorithm and experimental validation for end-milling operations. Int J Adv Manuf Technol 32(7–8):644–655
Panda SS, Chakraborty D, Pal SK (2008) Flank wear prediction in drilling using back propagation neural network and radial basis function network. App Soft Comput 8(2):858–871
Park HW, Liang SY (2008) Force modeling of micro-grinding incorporating crystallographic effects. Int J Mach Tools Manuf 48(15):1658–1667
Patel K, Batish A, Bhattacharya A (2009) Optimization of surface roughness in an end-milling operation using nested experimental design. Prod Eng 3(4–5):361–373
Paul A, Kapoor SG, DeVor RE (2005) Chisel edge and cutting lip shape optimization for improved twist drill point design. Int J Mach Tools Manuf 45(4–5):421–431
Pedersen NL (2004) Optimization of holes in plates for control of eigenfrequencies. Struct Multi Optim 28(1):1–10
Prakash S, Palanikumar K, Manoharan N (2009) Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach. Int J Adv Manuf Technol 45(3–4):370–381
Prakasvudhisarn C, Kunnapapdeelert S, Yenradee P (2009) Optimal cutting condition determination for desired surface roughness in end milling. Int J Adv Manuf Technol 41(5–6):440–451
Prasad AVS, Rao RK, Rao VKS (1997) Optimal selection of process parameter for turning operation in CAPP system. Int J Prod Res 35(6):1495–1522
Quiza R, Figueira L, Davim JP (2008) Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel. Int J Adv Manuf Technol 37:641–648
Radhakrishnan T, Nandan U (2005) Milling force prediction using regression and neural networks. J Intell Manuf 16(1):93–102
Rai JK, Xirouchakis P (2008) Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components. Int J Mach Tools Manuf 48(6):629–643
Rajemi MF, Mativenga PT, Aramcharoen A (2010) Sustainable machining: selection of optimum turning conditions based on minimum energy considerations. J Cleaner Prod 18(10–11):1059–1065
Rao RV, Pawar PJ (2010a) Parameter optimization of a multi-pass milling process using non-traditional optimization algorithms. Appl Soft Comp 10(2):445–456
Rao RV, Pawar PJ (2010b) Grinding process parameter optimization using non-traditional optimization algorithms. Proc Inst Mech Eng Part B J Eng Manuf. doi:10.1243/09544054JEM1782
Rao DS, Hebbar HS, Komaraiah M (2007) Surface hardening of high-strength low alloy steels (hsla) dual-phase steels by ball burnishing using factorial design. Mater Manuf Process 22(7):825–829
Rao DS, Hebbar HS, Komaraiah M, Kempaiah UN (2008) Investigations on the effect of ball burnishing parameters on surface hardness and wear resistance of HSLA dual-phase steels. Mater Manuf Process 23(3):295–302
Rawat S, Attia H (2009) Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites. Wear 267(5–8):1022–1030
Reddy NSK, Rao PV (2005) Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling. Int J Adv Manuf Technol 26(11–12):1202–1210
Reddy NSK, Rao PV (2006) Selection of an optimal parametric combination for achieving a better surface finish in dry milling using genetic algorithms. Int J Adv Manuf Technol 28(5–6):463–473
Reddy SVB, Shunmugam MS, Narendran TT (1998) Optimal sub-division of the depth of cut to achieve minimum production cost in multi-pass turning using a genetic algorithm. J Mater Process Technol 79(1–3):101–108
Routara BC, Bandyopadhyay A, Sahoo P (2009) Roughness modeling and optimization in CNC end milling using response surface method: effect of workpiece material variation. Int J Adv Manuf Technol 40(11–12):1166–1180
Rowe WB, Yan L, Inasaki I, Malkin S (1994) Application of artificial intelligence in grinding. CIRP Ann Manuf Technol 43(2):521–531
Rowe WB, Li Y, Mills B, Allanson DR (1996) Application of intelligent CNC in grinding. Comput Ind 31(1):45–60
Rowe WB, Li Y, Chen X, Mills B (1997) An intelligent multiagent approach for selection of grinding conditions. CIRP Ann Manuf Technol 46(1):233–238
Roy SS (2006) Design of genetic-fuzzy expert system for predicting surface finish in ultra-precision diamond turning of metal matrix composite. J Mater Process Technol 173(3):337–344
Saljé E, See MV (1987) Process-Optimization in Honing. CIRP Ann Manuf Technol 36(1):235–239
Samhouri MS, Surgenor BW (2005) Surface roughness in grinding: on-line prediction with adaptive neuro-fuzzy inference system. Trans NAMRI/SME 33:57–64
Sanjay C, Jyothi C (2006) A study of surface roughness in drilling using mathematical analysis and neural networks. Int J Adv Manuf Technol 29(9–10):846–852
Sanjay C, Neema ML, Chin CW (2005) Modeling of tool wear in drilling by statistical analysis and neural network. J Mater Process Technol 170:494–500
Saravanan R, Sachithanandam M (2001) Genetic algorithm (GA) for multivariable surface grinding process optimization using a multi-objective function model. Int J Adv Manuf Technol 17:330–338
Saravanan R, Ashokan P, Sachithanandam M (2001) Comparative analysis of conventional and non-conventional optimization technique for CNC-turning process. Int J Adv Manuf Technol 17:471–476
Saravanan R, Asokan P, Sachidanandam M (2002) A multi-objective genetic algorithm (GA) approach for optimization of surface grinding operations. Int J Mach Tools Manuf 42(12):1327–1334
Saravanan R, Sankar RS, Asokan P, Vijayakumar K, Prabhaharan G (2005) Optimization of cutting conditions during continuous finished profile machining using non-traditional techniques. Int J Adv Manuf Technol 26(1–2):30–40
Sardiñas RQ, Reis P, Davim JP (2006a) Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms. Compos Sci Technol 66(15):3083–3088
Sardiñas RQ, Santana MR, Brindis EAA (2006b) Genetic algorithm-based multi-objective optimization of cutting parameters in turning processes. Eng Appl Artif Intell 19(2):127–133
Sathyanarayanan G, Lin IJ, Chen MK (1992) Neural network modeling and multiobjective optimization of creep feed grinding of superalloys. Int J Prod Res 30(10):2421–2438
Satishkumar S, Asokan P, Kumanan S (2006) Optimization of depth of cut in multi-pass turning using nontraditional optimization techniques. Int J Adv Manuf Technol 29(3–4):230–238
Savas V, Ozay C (2008) The optimization of the surface roughness in the process of tangential turn-milling using genetic algorithm. Int J Adv Manuf Technol 37(3–4):335–340
Sedighi M, Afshari D (2009) Creep feed grinding optimization by an integrated GA-NN system. J Intell Manuf. doi:10.1007/s10845-009-0243-4
Shaji S, Radhakrishnan V (2003) Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method. J Mater Process Technol 141(1):51–59
Sharma VS, Dhiman S, Sehgal R, Sharma SK (2008) Estimation of cutting forces and surface roughness for hard turning using neural networks. Int J Adv Manuf Technol 19(4):473–483
Sheng Y, Tomizuka M (2006) Intelligent modeling of thrust force in drilling process. J Dyn Syst Meas Control 128(4):846–856
Shin YC, Joo YS (1992) Optimization of machining conditions with practical constraints. Int J Prod Res 30(12):2907–2919
Shiou FJ, Chen CH (2003) Freeform surface finish of plastic injection mold by using ball-burnishing process. J Mater Process Technol 140(1–3):248–254
Shiou FJ, Cheng CH (2008) Ultra-precision surface finish of NAK80 mould tool steel using sequential ball burnishing and ball polishing processes. J Mater Process Technol 201(1–3):554–559
Shiou FJ, Ciou HS (2008) Ultra-precision surface finish of the hardened stainless mold steel using vibration-assisted ball polishing process. Int J Mach Tools Manuf 48(7–8):721–732
Shiou FJ, Hsu CC (2008) Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre. J Mater Process Technol 205(1–3):249–258
Shunmugam MS, Reddy SVB, Narendran AA (2000a) Selection of optimal conditions in multi-pass face-milling using a genetic algorithm. Int J Mach Tools Manuf 40:401–414
Shunmugam MS, Reddy SVB, Narendran TT (2000b) Optimal selection of parameters in multi-tool drilling. J Mater Process Technol 103(2):318–323
Sick B (2002) On-line and indirect tool wear monitoring in turning with artificial neural net works: a review of more than a decade of research. Mech Syst Signal Process 16(4):487–546
Siddiquee AN, Khan ZA, Mallick Z (2010) Grey relational analysis coupled with principal component analysis for optimization design of the process parameters in in-feed centreless cylindrical grinding. Int J Adv Manuf Technol 46(9–12):983–992
Singh I, Bhatnagar N, Viswanath P (2008) Drilling of uni-directional glass fiber reinforced plastics: experimental and finite element study. Mater Des 29(2):546–553
Sonar DK, Dixit US, Ojha DK (2006) The application of radial basis function neural network for predicting the surface roughness in a turning process. Int J Adv Manuf Technol 27(7–8):661–666
Sonmez AI, Baykasoglu A, Dereli T, Filiz IH (1999) Dynamic optimization of multipass milling operations via geometric programming. Int J Mach Tools Manuf 39:297–332
Soodamani R, Liu ZQ (2000) GA-based learning for a model-based object recognition system. Int J Approx Reas 23(2):85–109
Sreeram S, Kumar AS, Rahman M, Zaman MT (2006) Optimization of cutting parameters in micro end milling operations in dry cutting condition using genetic algorithms. Int J Adv Manuf Technol 30(11–12):1030–1039
Srinivas J, Giri R, Yang SH (2009) Optimization of multi-pass turning using particle swarm intelligence. Int J Adv Manuf Technol 40(1–2):56–66
Stępień P (2009) A probabilistic model of the grinding process. Appl Math Modell 33(10):3863–3884
Stone R, Krishnamurthy K (1996) A neural network thrust force controller to minimize delaminating during drilling of graphite—epoxy laminates. Int J Mach Tools Manuf 36:985–1003
Suresh PVS, Rao PV, Deshmukh SG (2002) A genetic algorithmic approach for optimization of surface roughness prediction model. Int J Mach Tools Manuf 42(6):675–680
Tan FP, Creese RC (1995) A generalized multi-pass machining model for machining parameter selection in turning. Int J Prod Res 33(5):1467–1487
Tandon V, El-Mounayri H, Kishawy H (2002) NC end milling optimization using evolutionary computation. Int J Mach Tools Manuf 42(5):595–605
Tang Y (2006) Optimization strategy in end milling process for high speed machining of hardened die/mold steel. J Univ Sci Technol Beijing Miner Metall Mater 13(3):240–243
Tolouei-Rad M, Bidhendi IM (1997) On the optimization of machining parameters for milling operations. Int J Mach Tools Manuf 37:1–16
Tönshoff HK, Peters J, Inasaki I, Paul T (1992) Modeling and simulation of grinding processes. CIRP Ann Manuf Technol 41(2):677–688
Totis G (2009) RCPM: a new method for robust chatter prediction in milling. Int J Mach Tools Manuf 49(3–4):273–284
Trmal GJ, Zhu CB, Midha PS (1992) An expert system for grinding process optimization. J Mater Process Technol 33(4):507–517
Tsao CC (2007) Taguchi analysis of drilling quality associated with core drill in drilling of composite material. Int J Adv Manuf Technol 32(9–10):877–884
Tsao CC, Hocheng H (2004) Taguchi analysis of delamination associated with various drill bits in drilling of composite material. Int J Mach Tools Manuf 44(10):1085–1090
Tsao CC, Hocheng H (2008) Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J Mater Process Technol 203(1–3):342–348
Tzeng YF (2006) Parameter design optimization of computerised numerical control turning tool steels for high dimensional precision and accuracy. Mater Des 27(8):665–675
Tzeng CJ, Lin YH, Yang YK, Jeng MC (2009) Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis. J Mater Process Technol 209(6):2753–2759
Umbrello D, Ambrogio G, Filice L, Shivpuri R (2008) A hybrid finite element method: artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel. Mater Des 29(4):873–883
Uros Z, Franc C, Edi K (2009) Adaptive network based inference system for estimation of flank wear in end-milling. J Mater Process Technol 209(3):1504–1511
Varghese B, Malkin S (1998) Experimental investigation of methods to enhance stock removal for superfinishing. CIRP Ann Manuf Technol 47(1):231–234
Varghese B, Malkin S (2000) Selection of optimal superfinishing parameters. J Manuf Process 2(2):124–130
Venk S, Govind R, Merchant ME (1990) An expert system approach to optimization of the centerless grinding process. CIRP Ann Manuf Technol 39(1):489–492
Vijayakumar K, Prabhaharan G, Asokan P, Saravanan R (2003) Optimization of multi-pass turning operations using ant colony system. Int J Mach Tools Manuf 43(15):1633–1639
Vinolas J, Biera J, Nieto J, Llorente JI, Vigneau J (1997) the use of an efficient and intuitive tool for the dynamic modeling of grinding processes. CIRP Ann Manuf Technol 46(1):239–242
Wan M, Zhang WH, Tan G, Qin GH (2008) Systematic simulation procedure of peripheral milling process of thin-walled workpiece. J Mater Process Technol 197(1–3):122–131
Wang J (1993) Multiple objective optimization of machining operations based on neural networks. Int J Adv Manuf Technol 8:235–243
Wang J (1998) Computer-aided economic optimization of end-milling operations. Int J Prod Econ 54(3):307–320
Wang YC (2007) A note on ‘optimization of multi-pass turning operations using ant colony system’. Int J Mach Tools Manuf 47(12–13):2057–2059
Wang DX, Zuo MJ, Qi KZ, Liang M (1996) Online tool adjustment with adaptive tool wear function identification. Int J Prod Res 34(9):2499–2515
Wang J, Zhang B, Xue B (2000) Computer-controlled lapping system for granite surface plates. J Manuf Syst 19(3):149–155
Wang X, Da ZJ, Balaji AK, Jawahir IS (2002) Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using genetic algorithms. Int J Prod Res 40(9):2053–2065
Wang ZG, Rahman M, Wong YS, Sun J (2005) Optimization of multi-pass milling using parallel genetic algorithm and parallel genetic simulated annealing. Int J Mach Tools Manuf 45:1726–1734
Wang X, Da ZJ, Balaji AK, Jawahir IS (2007) Performance-based predictive models and optimization methods for turning operations and applications: part 3-optimum cutting conditions and selection of cutting tools. J Manuf Processes 9(1):61–74
Wei ZC, Wang MJ, Ma RG, Wang L (2010) Modeling of process geometry in peripheral milling of curved surfaces. J Mater Process Technol 210(5):799–806
Weinert K, Blum H, Jansen T, Rademacher A (2007) Simulation based optimization of the NC-shape grinding process with toroid grinding wheels. Prod Eng 1(3):245–252
Wen XM, Tay AAO, Nee AYC (1992) Micro-computer-based optimization of the surface grinding process. J Mater Process Technol 29(1–3):75–90
Xiao G, Malkin S (1996) On-line optimization for internal plunge grinding. CIRP Ann Manuf Technol 45(1):287–292
Xu W, Wu Y, Sato T, Lin W (2010) Effects of process parameters on workpiece roundness in tangential-feed centerless grinding using a surface grinder. J Mater Process Technol 210(5):759–766
Yang WH, Tarng YS (1998) Design optimization of cutting parameters for turning operations based on the Taguchi method. J Mater Process Technol 84:122–129
Yang YK, Chuang MT, Lin SS (2009) Optimization of dry machining parameters for high-purity graphite in end milling process via design of experiments methods. J Mater Process Technol 209(9):4395–4400
Yao Y, Zhao H, Li J, Yuan Z (2006) Modeling of virtual workpiece with machining errors representation in turning. J Mater Process Technol 172(3):437–444
Yildiz AR (2009a) An effective hybrid immune-hill climbing optimization approach for solving design and manufacturing optimization problems in industry. J Mater Process Technol 209(6):2773–2780
Yildiz AR (2009b) A novel hybrid immune algorithm for optimization of machining parameters in milling operations. Robot Comput Integr Manuf 25(2):261–270
Yildiz AR, Ozturk F (2006) Hybrid enhanced genetic algorithm to select optimal machining parameters in turning operation. Proc Inst Mech Eng Part B J Eng Manuf 220(12):2041–2053
Zarei O, Fesanghary M, Farshi B, Saffar RJ, Razfar MR (2009) Optimization of multipass face-milling via harmony search algorithm. J Mater Process Technol 209:2386–2392
Zhang JZ, Chen JC (2009) Surface roughness optimization in a drilling operation using the taguchi design method. Mater Manuf Processes 24(4):459–467
Zhang LB, Wang LJ, Liu XY, Zhao HW, Wang X, Luo HY (2001) Mechanical model for predicting thrust and torque in vibration drilling fibre-reinforced composite materials. Int J Mach Tools Manuf 41(5):641–657
Zhang C, Rentsch R, Brinksmeier E (2005) Advances in micro ultrasonic assisted lapping of microstructures in hard–brittle materials: a brief review and outlook. Int J Mach Tools Manuf 45(7–8):881–890
Zheng HQ, Li XP, Wong YS, Nee AYC (1999) Theoretical modeling and simulation of cutting forces in face milling with cutter runout. Int J Mach Tools Manuf 39(12):2003–2018
Zhu GY, Zhang WB (2008) Drilling path optimization by the particle swarm optimization algorithm with global convergence characteristics. Int J Prod Res 46:2299–2311
Zhu CB, Midha PS, Trmal GJ (1993) A dynamic modeling approach to computer aided optimum selection of grinding parameters. J Mater Process Technol 38(1–2):227–245
Zolgharni M, Jones BJ, Bulpett R, Anson AW, Fanks J (2008) Energy efficiency improvements in dry drilling with optimised diamond-like carbon coatings. Diam Rel Mater 17(7–10):1733–1737
Zuperl U, Cus F (2003) Optimization of cutting conditions during cutting by using neural networks. Robot Comput Integr Manuf 19(1–2):189–199
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer-Verlag London Limited
About this chapter
Cite this chapter
Venkata Rao, R. (2011). Modeling and Optimization of Machining Processes. In: Advanced Modeling and Optimization of Manufacturing Processes. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-0-85729-015-1_2
Download citation
DOI: https://doi.org/10.1007/978-0-85729-015-1_2
Published:
Publisher Name: Springer, London
Print ISBN: 978-0-85729-014-4
Online ISBN: 978-0-85729-015-1
eBook Packages: EngineeringEngineering (R0)