Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Referencse
White, C.C., Martin, J., Weber, S., Shultz, L., and Williams, R.S., “Reliability-Based Method for Service Life Prediction of Materials,” Proc. SPE/ANTEC National Meeting, 2002.
White, C.C., Hunston, D.L., and Williams, R.S., “Challenges in Characterizing Sealant,” Proc. ANTEC Conference from Society of Plastics Engineering, Nashville, TN, 2003.
White, C., Embree, N., Buch, C., and Williams, R.S., “Design, Development, and Testing of a Hybrid in situ Testing Device for Building Joint Sealant,” Rev. Sci. Instrum., 76, 045111 (2005).
White, C.C. and Hunston, D.L, “Issues Related to the Mechanical Property Characterization of Sealants,” Durability of Building and Construction Sealants and Adhesives, ASTM Special Technical Publication 1453, p. 325-334, 2004.
Williams, R.S., Sanandi, A., Halpin, C., and White, C., “Merging Weather Data with Materials Response Data during Outdoor Exposure,” Proc. Third International Woodcoatings Congress, The Hague, The Netherlands, 2002.
Williams R.S., Lacher, S., Halpin, C., and White, C., “Development of Test Apparatus for Service Life Prediction of Sealant Formulations and Evaluation of Data from 18 Months of Outdoor Weathering,” Proc. Fourth International Woodcoatings Congress, The Hague, The Netherlands, 2004.
Williams, R.S., Lacher, L., Halpin, C., and White, C., “Evaluating Weather Factors and Material Response during Outdoor Exposure to Determine Accelerated Test Protocols for Predicting Service Life,” in Service Life Prediction: Challenging the Status Quo, Martin, J.W., Ryntz, R.A., and Dickie, R.A. (Eds.), Federation of Societies for Coatings Technology, Blue Bell, PA,p. 171-185, 2005.
Williams, R.S., Lacher, S., Halpin, C., and White, C., “Evaluation of Materials During Outdoor Testing Using a Computer-Controlled Test Apparatus,” Proc. Fifth International Woodcoatings Congress, Prague, Czech Republic, 2006.
Martin, J.W. and Bauer, D.R. (Eds.), Service Life Prediction: Methodology and Metrologies, American Chemical Society Series 805, Oxford Press, New York, 2001.
D 822 96, Standard Practice of Conducting Tests on Paint and Related Coatings and Materials using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
D 5031 96, Standard Practice of Conducting Tests on Paint and Related Coatings and Materials using Enclosed Carbon-Arc Light and Water Exposure Apparatus, Annual Book of ASTM Standards, Vol. 06.01, ASTM International, West Conshohocken, PA, 2001.
G 26 96, Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc) With and Without Water for Exposure of Nonmetallic Materials, Annual Book of ASTM Standards, Vol. 06.01, ASTM International, West Conshohocken, PA, 2001.
G 53 96, Standard Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UVCondensing Type) for Exposure of Nonmetallic Materials, Annual Book of ASTM Standards, Vol. 06.01, ASTM International, West Conshohocken, PA, 2001.
D 4587 91, Standard Practice of Conducting Tests on Paint and Related Coatings and Materials using a Fluorescent UV-Condensation Light- and Water-Exposure Apparatus, Annual Book of ASTM Standards, Vol. 06.01, ASTM International, West Conshohocken, PA, 2001.
Martin, J.W., “ A Critical Review of the Role of Field-Exposure Experiments in Predicting the Service Life of Coatings,” Plastics and Coatings Durability, Stabilization, Testing, Ryntz, R.A. (Ed.), Ch. 2. Hanser Gardner Publications, Inc., Cincinnati, OH,p. 33, 2001.
Martin, J.W., “Repeatability and Repeatability of Field Exposure Results,” Service Life Prediction Methodologies and Metrologies, Martin, J.W. and Bauer, D.R. (Eds.), ACS Symposium Series 805, American Chemical Society, Oxford Press, NY, p. 1, 2001.
Nguyen, T., Rezig, A., Gu, X., Kidah, B., and Martin, J.W., “Degradation Kinetics and Mechanisms of Aliphatic Amine-Cured Epoxy Coatings Exposed to Xenon Arc UV and Outdoors,” Proc. Western Coatings Conference, Las Vegas, NV, 2005.
C 1442 99, Standard Practice for Conducting Tests on Sealants using Artificial Weathering Apparatus, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
C 718 93, Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
C 732 95, Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
C 734 93, Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
C 793 97, Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
C 1257 94, Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
D 2249 94, Standard Test Method for Predicting Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash, Annual Book of ASTM Standards, Vol. 04.07, ASTM International, West Conshohocken, PA, 2000.
ASTM C 719 93, Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle), 2005.
Onuoha, U.O., “Durability of One-Part Polyurethane and Polyurethane Hybrid Sealants,” Durability of Building Sealants, Wolf, A.T. (Ed.), RILEM Pub., France, p. 235–251, 1999.
Brown, N.G., “Assessment of Joint Sealant by Outdoor Exposure in Cyclic Movement Testers,” Report No. 01.1-2, CSIRO Division of Building Research, Highett, Victoria, Australia, p. 16-22, 1965.
Burstrom, P.G., “Durability and Ageing of Sealants,” In Durability of Building Materials and Components, ASTM STP 691, Sereda, P.J. and Litvan, G.G. (Eds.), ASTM Pub., Philadelphia, PA, p. 643–657, 1980.
Karpati, K.K., Solvason, M.R., and Sereda,, P.J., “Weathering Rack for Sealants,” J. Coat. Technol., 49, No. 626, p. 44–47 (1977).
Karpati, K.K., “Device for Weathering Sealants Undergoing Cyclic Movements,” J. Coat. Technol., 50, No. 641, p. 27–30 (1978).
Lacasse, M.A., “Advances in Test Methods to Assess the Long Term Performance of Sealants,” Science and Technology of Building Seals, Sealants, Glazing and Waterproofing, Myers, J.C. (Ed.), Vol. III, ASTM STP 1254, ASTM International, Philadelphia, PA, 1994.
Lacasse, M.A., Giffin, G.B., and Margeson, J.C., “Evaluation of Cyclic Fatigue as a Means of Assessing the Performance of Construction Joint Sealants,” ASTM Special Technical Publication, n, 1271, Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing, ASTM International, Philadelphia, PA, 1996; Proc. 5th Symposium on the Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing, Phoenix, AZ, Vol. 5, p, 266-281, 1995.
Lacasse, M.A., Giffin, G.B., and Margeson, J.C., “Laboratory Cyclic Fatigue Test of Silicone Sealant Mini-Specimens, “ASTM Special Technical Publication, n. 1334, Proc. 7th Symposium on the Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing, San Diego, CA, p. 51-65, 1998.
Lacasse, M.A. and Margeson, J.C., “Movement during Cure of Latex Building Joint Sealants,” Proc. 6th Annual Symposium on the Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing, Fort Lauderdale, FL, Vol. 6, p. 129–145, 1999.
Bolte, H., Boettger, T., and Wolf, A.T., “Preliminary Report on the Ageing Behavior of Sealants Exposed to Dynamic Natural and Artificial Weathering,” RILEM Proceedings PRO 10 Durability of Building and Construction Sealants, p. 151–172, 2000.
Liu, X-X, and Wang, S.T., “Joint Sealant Fatigue Property of Airport Concrete Pavement,” J. Traffic Transport. Engineering, 6 (1), 44–47 (2006).
Al-Qadi, I.L., Abo-Qudais, S., and Khuri, R.E., “Method to Evaluate Rigid-Pavement Joint Sealant under Cyclic Shear and Constant Horizontal Deflection,” Transport. Res. Rec., 1680, p. 30–35 (1999).
Al-Qadi, I.L., and Abo-Qudais, S., ASTM Special Technical Publication, n. 1254, pt 3; Proc. 3rd Symposium on the Science and Technology of Building Seals and Sealants, Fort Myers, FL, p. 85–94, 1993.
Miyauchi, H., Enomoto, N., Sugiyama, S., and Tanaka, K., “Artificial Weathering and Cyclic Movement Test bResults Based on the RILEM TC 139-DBS Durability Test Method for Construction Sealants,” ASTM Special Technical Publication, n 1453, Durability of Building and Construction Sealants and Adhesives, American Society for Testing and Materials, West Conshohocken, PA, p. 206–212, 2004.
Sharman, W.R., Fry, J.I., and Whitney, R.S., “Six Years Natural Weathering of Sealants,” Durability of Building Materials, 2 (1), 79-90 (1983).
Koike, M., Tanaka, K., and Oda, S-I., “Dynamic Properties of Polysulfide and Silicone Sealants in Cyclic Tests of Longer Periods,” Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, 7, 159-165 (1982).
Marechal, J.C., and Kalifa, P., “The Prediction of Long-Term Sealant Performance from Dynamic Accelerated Weathering,” Durability of Building Materials and Components 7, Proc. International Conference on Durability of Building Materials and Components, 7th, Stockholm, p. 54–64, 1996.
Beech, J.C., “Test Methods for the Movement Capability of Building Sealants: The State of the Art, Materials and Structures, 18 (108), 473–482 (1985).
Wolf, A.T., “Aging Resistance of Building and Construction Sealants, Part 1,” RILEM Proc. Durability of Building Sealants, p. 63–89 (1996).
Wolf, A.T., “Attempts at Correlating Accelerated Laboratory and Natural Outdoor Ageing Results,” Durability of Building Sealants, Wolf, A.T. (Ed.), RILEM Pub., France. p. 181–201, 1999.
Wolf, A.T. and Seneffe, B., “Development of RILEM Durability Test Methods for Curtainwall Sealants,” Proc. International Conference on Durability of Building Materials and Components, 9, Brisbane, Australia, p. 105/1-105/9, 2002.
Lacher, S., Williams, R.S., Halpin C., and White C., “Development of a Powered Outdoor Sealant Fatigue Test Apparatus,” In: Service Life Prediction, Challenging the Status Quo, Martin, J.W., Ryntz, R.A., and Dickie, R.A. (Eds.), Federation of Societies for Coatings Technology, Blue Bell, PA, p. 207–216, 2005.
Hunston, D.L., White, C.C., and Williams, R.S., “Viscoelastic Characterization of Sealant Materials,” Proc. 26th Annual Meeting Adhesion Society, Myrtle Beach, SC, 2003.
Hunston, D.L., White, C.C., and Williams R.S., “Mechanical Behavior of Caulks and Sealants,” Proc. 225th ACS National Meeting, New Orleans, LA, 2003.
Abraham, F., Alshuth, T., Jerrams, S., “The Dependence on Mean Stress and Stress Amplitude of the Fatigue Life of Elastomers,” Deutsches Institut fur Kautschuktechnologie e. V. Publikation, 134, 2001.
Bergström, J.S. and Boyce, M.C., “Time-Dependence of Elastomeric Materials: Experiments and Modeling,” 10th International Conference on Deformation, Yield and Fracture of Polymers, Cambridge, UK, April 1997.
Bergström, J.S., “Constitutive Modeling of Elastomers—Accuracy of Predictions and Numerical Efficiency,” PolymerFEM.com, 2005.
Wilkinson, G.N. and Rogers, C.E., “Symbolic Descriptions of Factorial Models for Analysis of Variance,” Applied Statistics,22:392-9 (1973).
Chambers, J.M., “Linear Models,” Chapter 4 of Statistical Models in S, Chambers, J.M. and Hastie, T.J. (Eds.), Wadsworth & Brooks/Cole, 1992.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media, LLC
About this paper
Cite this paper
Williams, R.S., Lacher, S., Halpin, C., White, C. (2009). Evaluating Cyclic Fatigue of Sealants During Outdoor Testing. In: Martin, J.W., Ryntz, R.A., Chin, J., Dickie, R.A. (eds) Service Life Prediction of Polymeric Materials. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-84876-1_9
Download citation
DOI: https://doi.org/10.1007/978-0-387-84876-1_9
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-84875-4
Online ISBN: 978-0-387-84876-1
eBook Packages: EngineeringEngineering (R0)