Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Charnley J, Kamangar A, and Longfield MD. The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip. Med Biol Eng (1969) 7(1): 31–39.
Gunston FH. Polycentric knee arthroplasty. Prosthetic simulation of normal knee movement. J Bone Joint Surg (1971) 53: 272–277.
Brady LP, McCutchen JW, A ten-year follow-up study of 170 Charnley total hip arthroplasties, Clin Orthop (1986) 211: 51–54.
Kavanagh BF, Wallrichs S, Dewitz M, Berry D, Currier B, Ilstrup D, Coventry MB. Charnley low-friction arthroplasty of the hip. Twenty-years results with cement, J Arthroplasty (1994) 9: 229–234.
Buechel FF, Sr. Long-term follow-up after mobile-bearing total knee replacement, Clin Orthop (2002) 404: 40–50.
Sorrells RB, The clinical history and development of the low contact stress total knee arthroplasty, Orthopedics (2002) 25 (suppl 2): s207–s212.
Rydholm U, Tjornstand B, Pettersson K and Lidgren L, Surface replacement of the elbow in rheumatoid arthritis, J Bone Jt Surg (1984) 66B: 737–741.
Neviasen RJ, Management of shoulder problems, Orthop Clin North Am (1987) 18(3) 445–462.
Swanson AB, Flexible implant arthroplasty for arthritic finger joints, J Bone Jt Surg (1972) 54A: 435–455.
Gellman H, Stetson W, Brumfield RH, Costigan W and Kuschner SH, Silastic metacarpophalangeal joint arthroplasty in patients with rheumatoid arthritis, Clin Orthop Rel Res (1997) 342: 16–21.
Flatt AE, Restoration of rheumatoid finger-joint function, J Bone Jt Surg (1961) 43A,no.5: 753–774.
Brannon CEW, Klein G. Experiences with a finger-joint prosthesis. The Journal of Bone and Joint Surgery (1959) 41A, January, 87–102.
Zachariae L. Experience of Flatt finger joint prostheses. Acta Orthop Scandinav (1967) 38: 329–340.
Jackson IT. Total finger joint replacement. In An Introduction to the Bio-mechanics of Joints and Joint Replacement (Ed. D. Dowson and V. Wright), Mechanical engineering publication, British (1981), 234–243.
Henk GJ, Deutman R, Jim R. Use of the Swanson silicone trapezium implant for treatment of primary osteoarthritis. The Journal of Bone and Joint Surgery, 2001, 83A, 7, 999–1004.
Revell PA, Saffar NAL, Kobayashi A. Biological reaction to debris in relation in joint prostheses. Proc Instn Mech Engrs. (1997) 211H, 187–197.
Fisher J. Biomedical Application, in Modern Tribology Handbook Vol. 2 (Ed. B. Bhushan), CRC Press, New York (2001), 1593–1609.
Green TR, Fisher J, Stone MH, Worblewski BM and Ingham E. Polyethylene particles of a critical size are necessary for the induction of cytokines by macrohpages in vitro. Biomaterials (1998) 19: 2297–2302.
Fisher J, Bell J, Barbour PSM, Tipper JL, Matthews JB, Besong AA, Stone MH, Ingham E. A novel method for the predicton of functional biological activity of polyethylene wear debris. Proc Instn Mech Engrs. (2001) 215H: 127–132.
Jazrawi LM, Kummer F, DiCesare PE. Alternative bearing surfaces for total joint arthtoplasty. J Am Acad Orthop Surg (1998) 6: 198–203.
Varano R, Yue S, Bobyn JD, Medley JB. Co-Cr-Mo alloys used in metal-metal bearing surfaces. An Alternative Bearing Surfaces in Total Joint Replacement (Ed. JJ Jacobs and TL Craig) (1998) ASTM STP 1346.
Dearnley PA. A review of metallic, ceramic and surface-treated metals used for bearing surfaces in human joint replacements. Proc Instn Mech Engrs. (1999) 213H: 107–135.
Greenwald AS, Garino JP. Alternative bearing surfaces: the good, the bad, and the ugly. The Journal of Bone and Joint Surgery (2001) 83A (Supp2): 68–72.
Johnston BR. Proximal Interphalangeal Joint surface replacement arthroplasty. The Journal of Hand Surgery (2001) 6 (July): 1–11.
Moller K, Sollerman C, Geijer M, Branemark P-I. Osseointegrated silicone implants. Acta Orthop Scandinav (1999) 70(2): 109–115.
Chow SP, Lam KW, Gibson I, Ngan AHW, Lu W, Ip WY, Chiu KY. A novel artificial prosthetic replacement for the proximal interphalangeal joint of the hand – from concept to prototype. Hand Surgery (2005) 10: 159–168.
Condamine JL, Marcucci L, Bisson P, Lebreton L. DJOA arthroplasty ten years of experience, and introducing the DJOA 3. In: Schuind F, An KN, Recent Advances in upper extremity arthroplasty, Proceedings of the Brussels International Upper Extremity Symposium. World Scientific (1997): 77–89.
Linscheid R, Murray PM, Vidal MA, Beckenbaugh RD. Development of a surface replacement arthroplasty for proximal interphalangeal joints. J Hand Surg (1997) 22A: 286–298.
Low FH, Khoo LP, Chua CK, Lo NN. Determination of the major dimensions of femoral implants using morphometrical data and principal component analysis. Proc Instn Mech Engrs (2000) 214H: 301–309.
Schulter-Ellis FP, Lazar GT. Internal morphology of human phalanges. J Hand Surg (1984) 9A: 490–495.
Ash HE, Unsworth A. Design of a surface replacement prosthesis for the proximal interphalangeal joint. Proc Instn Mech Engrs (2000) 214H: 151–163.
Gillespie TE, Flatt AE, Youm Y, Sprague BL. Biomechanical evaluation of metacarpophalangeal joint prosthesis designs. J Hand Surg (1979) 4A: 508–521
Linscheid R. Implant arthroplasty of the hand: retrospective and prospective consideration. J Hand Surg (2000) 25A: 796–816.
Charnley J. The bonding of prostheses to bone by cement. J Bone Joint Surg (1964) 46B: 518–529.
Nafei A, Kristensen O, Knudsen AM, Hvid I, Jensen J. Survivorship analysis of cemented total condylar knee arthroplasty: a long-term follow-up report on 348 cases. J Arthroplasty (1996) 11: 7–10.
Wang JS, Franzen H, Toksvig-Larsen S, Lidgren L. Does vacuum mixing of bone cement affect heat generation? Analysis of four cement brands. Journal of Applied Biomaterials (1995) 6: 105–108.
Kindt-Larsen T, Smith DB, Jensen JS. Innovations in acrylic bone cement and application equipment. Journal of Applied Biomaterials (1995) 6: 75–83.
Walker PS, Erkman MJ. Laboratory evaluation of a metal-plastic type of metacarpophalangeal joint prosthesis. Clin Orthop (1975) 112: 349–356.
Steffee AD, Beckenbaugh RD, Linscheid RL, Dobyns JH. The development, technique, and early clinical results of total joint replacement for the metacarpophalangeal joint of the fingers. Orthopaedics (1981) 4 (2): 175–180.
Sibly TF, Unsworth A. Fixation of a surface replacement endoprosthesis of the metacarpophalangeal joint. Proc Instn Mech Engrs (1991) 205H: 227–232.
Beevers DJ, Seedhom BB. Metacarpophalangeal joint prostheses: a review of past and current designs. Proc Instn Mech Engrs (1993); 207H: 195–206.
Chockalingam S, Scott G. The outcome of cemented vs cementless fixation of a femoral component in total knee replacement (TKR) with the identification of radiological signs for the prediction of failure. Knee (2000) 7: 233–238.
Aaron G. Fixation for the millennium: The Hip. J Arthroplasty (2002) 17(4S): 3–5.
Lawrence D. Fixation of the millennium: The Knee. J Arthroplasty (2002) 17(4S): 6–8.
Cook SD, Barrack RL, Thomas KS, Haddad RJ. Quantitative histological analysis of tissue growth into porous total knee components. J Arthroplasty (1989) 4S: S33–S43.
Lundborg G, Branemark P, Carlsson I. Metacarpophalangeal joint arthroplasty based on the osseointegration concept. J Hand Surg (1993) 18B: 693–703.
Farron A, Rakotomannana RL, Zambelli PY, Leyvraz PF. Total knee prosthesis. Clinical and numerical study of micromovements of the tibial implant. Rev Chir Orthop Reparatr Appar Mot (1995) 80: 28–35.
Ash HE, Unsworth A. Further studies into proximal interphalangeal joint dimensions for the design of a surface replacement prosthesis: medullary cavities and transverse plane shapes. Proc Instn Mech Engrs (1997) 211H: 377–390.
Landsmeer JMF. Anatomical and functional investigation on the articulations of the human dinger. Acta Anatomica (1955) 25(Suppl 24): 1–69.
Kuczynski K. Less-known aspects of the proximal interphalangeal joints of the human hand. The Hand (1975) 7(1): 31–33.
Mallon WJ, Brown HR, Nunley JA. Digital range of motion: normal values in young adults. J Hand Surg (1991) 16A: 882–887.
Hume Mary, Gellman Harris, McKellop H, Brumfield R. Functional range of motion of the joints of the hand. J Hand Surg (1990) 15A: 240–243.
Condamine JL, Nenoit JY, Comtet JJ, Aubriot JH. Proposed digital arthroplasty critical study of the preliminary results. Ann Chir Main (1988) 7(4): 282–297.
Stachowiak GW, Batchelor AW. In: Engineering tribology, 2nd edition. Butterworth-Heinemann (2001), 281–356.
Harris C, Rutledge F. The functional anatomy of the extensor mechanism of the finger. J Bone Joint Surg (1972) 54A: 713–726.
Fehring TK. Rotational malalignment of the femoral component in total knee arthroplasty. Clin Orthop (2000) 380: 72–79.
Poilvache PL, Insall JN, Scuderi GR, Font-Rodriguez DE. Rotational landmarks and sizing of the distal femur in total knee arthroplasty. Clin Orthop (1996) 331: 35–46.
Rhee RY, Reading G, Christie-Wray R. A biomechanical study of the collateral ligaments of the proximal interphalangeal joint. J Hand Surg (1992) 17A: 157–163.
Minamikawa Y, Imaeda T, Amadio PC, Linscheid RL, Cooney WP, An KN. Lateral stability of proximal interphalangeal joint replacement. J Hand Surg (1994) 19A: 1050–1054.
Landsmeer JMF. Study in anatomy of articulation: The equilibrium of the intercalated bone. Acta Morph Neerl Scand (1960) 3:287–303.
Wehbe M, Hunter JM. Flexor tendon gliding in the hand, Part I, in vivo excursions. J Hand Surg (1985) 10A: 570–574.
An KN, Chao EY, Cooney WP, Linsheid RL. Forces in the normal and abnormal hand. J Orthop Res (1985) 3(2): 202–211.
Amis AA. Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. J Biomed Eng (1987) 9: 313–320.
Sancho-Bru JL, Perez-Gonzalez A, Vergara-Monedero M, Giurintano D. A 3-D dynamic model of human finger for studying free movements. J Biomech (2001) 34: 1491–1500.
Fowler NK, Nicol AC. Interphalangeal joint and tendon forces: normal model and biomechanical consequences of surgical reconstruction. J Biomech (2000) 33: 1055–1062.
Ash HE, Joyce TJ, Unsworth A. Biomechanics of the distal upper limb. Current Orthopaedics (1996) 10: 25–36.
Harkonen R, Piirtomaa M, Alaranta H. Grip strength and hand position of the dynamometer in 204 finnish adults. J Hand Surg (1993) 18B: 129–132.
Brand PW, Hollister AM, Agee JM. Transmission. In: Clinical Mechanics of the Hand, 3rd ed., Brand & Hollister eds, Mosby (1999), 61–99.
Semlitsch M, Willert HG. Clinical wear behaviour of ultra-high molecular weight polyethylene cups paired with metal and ceramic ball heads in comparison to metal-on-metal pairings of hip joint replacements. Proc Instn Mech Engrs (1997) 211H: 73–88.
Willwer HG, Bertram H, Buchhorn GH. Osteolysis in alloarthroplasty of the hip. The role of ultra-high molecular weight polyethylene wear particles. Clin Orthop (1990) 258: 95–107.
Peters PC, Engh GA, Dwyer Ka, Vinh TN. Osteolysis after total knee arthroplasty without cement. J Bone Joint Surg (1992) 74: 864–866.
Harris WH. Wear and periprosthetic osteolysis: the problem. Clin Orthop Rela Res (2001) 15(3): 263–273.
Edirisinghe MJ, Evans JRG. Review: fabrication of engineering ceramics by injection molding. II. Techniques. Int J High Tech Ceram (1986) 2: 249–278.
Tseng WJ, Hsu CK. Cracking defect and porosity evolution during thermal debinding in ceramic injection moldings. Ceramics International (1999) 25: 461–466.
Joyce TJ, Unsworth A. The design of a finger wear simulator and preliminary results. Proc Instn Mech Engrs (2000) 214H: 519–526.
Medley JB, Chan FW, Krygier JJ, Bobyn JD. Comparison of alloys and designs in a hip simulator study of metal on metal implants. Clin Orthop (1996) 329S: 148–159.
Minami Akio, An KN, Cooney WP, Linscheid RL, Chao WYS. Ligament stability of the metacarpophalangeal joint: A biomechanical study. J Hand Surg (1985) 10A: 255–260.
Faull H, Kelly P, Mullet H, Synnott K. Outcome measures following metacarpophalangeal joint replacement. J Hand Surg (2000) 25B: 601–603.
Stokoe SM, Unsworth A. A finger function simulator and the laboratory testing of joint replacements. Proc Instn Mech Engrs (1990) 204H: 233–240.
Kiefhaber TR, Stern PJ, Grood ES. Lateral stability of the proximal interphalangeal joint. J Hand Surg (1986) 11A: 661–669.
Uchiyama S, Cooney WP, Linscheid RL, Niebur G, An KN. Kinematics of the proximal interphalangeal joint of the finger after surface replacement. J Hand Surg (2000) 25A: 305–312.
Purves WK, Berme N. Resultant finger joint loads in selected activities. J Biomed Engng (1980) 2: 285–289.
Kung PL, Chou P, Linscheid RL, Berglund LJ, Cooney WP, An KN. Intrinsic stability of an unconstrained metacarpophalangeal joint implant. Clinical Biomechanics (2003) 18: 119–125.
Beckenbaugh RD. Preliminary experience with a noncemented nonconstratined total joint arthroplasty for the metacarpophalangeal joints. Orthop (1983) 6(8): 962–965.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Gibson, I. et al. (2008). The Development of an Artificial Finger Joint. In: Bártolo, P., Bidanda, B. (eds) Bio-Materials and Prototyping Applications in Medicine. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-47683-4_9
Download citation
DOI: https://doi.org/10.1007/978-0-387-47683-4_9
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-47682-7
Online ISBN: 978-0-387-47683-4
eBook Packages: EngineeringEngineering (R0)