Finite Element Analysis

Part of the Advances in Mechanics and Mathematics book series (AMMA, volume 13)

Keywords

Finite Element Analysis Incompressible Material Element Stiffness Matrix Plate Anchor Nonlinear Finite Element Analysis 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Abbo, A.J. (1997). Finite Element Algorithms for Elastoplasticity and Consolidation, PhD Thesis, University of Newcastle, NSW.Google Scholar
  2. Abbo, A.J. and Sloan, S.W. (1996). An automatic load stepping algorithm with error control. Int. J. Num. Meth. Eng., Vol. 39, 1737–1759.CrossRefGoogle Scholar
  3. Bathe, K.J. (1982). Finite Element Procedures in Engineering Analysis, Prentice Hall.Google Scholar
  4. Britto, A.M. and Gunn, M.J. (1987). Critical State Soil Mechanics via Finite Elements, Ellis Horwood, Chichester.Google Scholar
  5. Burd, H.J. (1986). A Large Displacement Finite Element Analysis of a Reinforced Unpaved Road, DPhil Thesis, University of Oxford, UK.Google Scholar
  6. Burd, H.J. and Houlsby, G.T. (1990). Finite element analysis of two cylindrical expansion problems involving near incompressible material behaviour. Int. J. Num. Analy. Meth. Geomech., Vol. 14, 351–366.CrossRefGoogle Scholar
  7. Carter, J.P., Booker, J.R. and Davis, E.H. (1977). Finite deformation of an elasto-plastic soil. Int. J. Num. Analy. Meth. Geomech., Vol. 1, 2543.Google Scholar
  8. Carter, J.P., Desai, C.S., Potts, D.M., Schweiger, H.F. and Sloan, S.W. (2000). Computing and computer modelling in geotechnical engineering, Proc. of GeoEng2000, Vol I, 1157–1252.Google Scholar
  9. Chen, W.F. and Mizuno, E. (1990). Nonlinear Analysis in Soil Mechanics. Elsevier, Amsterdam.Google Scholar
  10. Christian, J.T. (1968). Undrained stress distribution by numerical methods. J. Soil Mech. Found. Div., ASCE, Vol. 96, 1289–1310.Google Scholar
  11. Crisfield, M.A. (1991). Non-linear Finite Element Analysis of solids and Structures, Vol I, John Wiley and Sons, Chichester.Google Scholar
  12. Crisfield, M.A. (1997). Non-linear Finite Element Analysis of solids and Structures, Vol II, John Wiley and Sons, Chichester.Google Scholar
  13. de Borst, R. and Vermeer, P.A. (1984). Possibilities and limitations of finite elements for limit analysis, Geotechnique, Vol. 34, 199–210.CrossRefGoogle Scholar
  14. Dienes, J.K. (1979). On the analysis of rotation and stress rate in deforming bodies, Acta Mechanica, Vol. 32, 217–232.CrossRefGoogle Scholar
  15. Herrmann, L.R. (1965). Elasticity equations for incompressible and nearly incompressible materials by a variational theorem. J. Am. Inst. Aeronautics and Astronautics, Vol. 3, 1896–1900.Google Scholar
  16. Hibbitt, H.D., Marcal, P.V. and Rice, J.R. (1970). A finite element formulation for problems of large strain and large displacement. Int. J. Solids and Strctures, Vol. 6, 1069–1086.CrossRefGoogle Scholar
  17. Hill, R. (1950). The Mathematical Theory of Plasticity, Clarendon Press, Oxford.Google Scholar
  18. Hill, R. (1968). On constitutive inequalities for simple materials. J. Mech. Phys. Solids, Vol 16, 229–242.CrossRefGoogle Scholar
  19. Jaumann, G. (1911). Sitzungsberichte akad. Wiss. Wien., Vol 120, 385.Google Scholar
  20. Jinka, A.G.K. and Lewis, R.W. (1994). Incompressibility and axisymmetry: a modified mixed and penalty formulation. Int. J. Num. Meth. Eng., Vol. 37, 1623–1649.CrossRefGoogle Scholar
  21. Khong, C.D. (2004). Development and Numerical Evaluation of Unzjied Critical State Models, PhD Thesis, University of Nottingham, UK.Google Scholar
  22. Khong, C.D. and Yu, H.S. (2002). Computational aspects of a unified critical state model for clay and sand, Proc. of 8th NUMOG, Rome, 271–277.Google Scholar
  23. Laursen, M.E. and Gellert, M. (1978). Some criteria for numerically integrated matrices and quadrature formulas for triangles. Int. J. Num. Meth. Eng., Vol. 12, 167–176.CrossRefGoogle Scholar
  24. Malkus, D.S. and Hughes, T.J.R. (1978). Mixed finite element methods-reduced and selective integration techniques: a unification of concepts. Comp. Methods Appl. Mech. Eng., Vol. 15, 63–81.CrossRefGoogle Scholar
  25. Malvern, L.E. (1969). Introduction to the Mechanics of a Continuous Medium. Prentice Hall, New Jersey.Google Scholar
  26. McMeeking, R.M. and Rice, J.R. (1975). Finite element formulations for problems of large elastic-plastic deformation. Int. J. Solids and Structures, Vol. 11, 601–616.CrossRefGoogle Scholar
  27. Naylor, D.J. (1974). Stresses in nearly incompressible materials by finite elements with application to the calculation of excess pore pressures. Int. J. Nurn. Meth. Eng., Vol 8, 443–460.CrossRefGoogle Scholar
  28. Naylor, D.J. (1994). On integrating rules for triangles, Numerical Methods in Geotechnical Engineering, Smith (ed.), Balkema, 111–114.Google Scholar
  29. Naylor, D.J., Pande, G.N., Simpson, B. and Tabb, R. (1981). Finite Elements in Geotechnical Engineering, Pineridge Press, Swansea.Google Scholar
  30. Nagtegaal, J.C., Parks, D.M. and Rice, J.R. (1974). On numerically accurate finite element solutions in the fully plastic range. Comp. Methods Appl. Mech. Eng., Vol. 4, 153–177.CrossRefGoogle Scholar
  31. Oldroyd, J.G. (1950). On the formulation of rheological equations of state. Proc. R. Soc. A, Vol 200, 523–541.Google Scholar
  32. Potts, D. M. and Zdravkovic, L. (1999). Finite Element Analysis in Geotechnical Engineering: Theory, Thomas Telford, London.Google Scholar
  33. Prager, W. (1961). An elementary discussion of definitions of stress rate. Quart. Appl. Math., Vol. 18, 403–407.Google Scholar
  34. Simo, J.C. and Hughes, T.J.R. (1998). Computational Inelasticity, Springer.Google Scholar
  35. Sloan, S.W. (1981). Numerical Analysis of Incompressible and Plastic Solids Using Finite Elements. PhD Thesis, University of Cambridge.Google Scholar
  36. Sloan, S.W. (1987). Substepping schemes for the numerical integration of elastoplastic stress-strain relations. Int. J. Num. Meth. Eng., Vol 24, 893–912.CrossRefGoogle Scholar
  37. Sloan, S.W. and Randolph, M.F. (1982). Numerical prediction of collapse loads using finite element methods. Int. J. Nurn. Analy. Meth. Geomech., Vol. 6, 47–76.CrossRefGoogle Scholar
  38. Sloan, S.W. and Randolph, M.F. (1983). Discussion on ‘Elasto-plastic analysis of deep foundations in cohesive soils’ by D.V. Griffiths. Int. J. Num. Analy. Meth. Geomech., Vol. 7, 385–393.CrossRefGoogle Scholar
  39. Tan, S.M. (2006). Constitutive and Numerical Modelling of Bonded Geomaterials, Forthcoming PhD Thesis, University of Nottingham, UK.Google Scholar
  40. Teh, C.I. (1987). An Analytical Study of the Cone Penetration, DPhil Thesis, University of Oxford, UK.Google Scholar
  41. Truesdell, C. (1953). The mechanical foundations of elasticity and fluid dynamics. J. Rat. Mech. Analys., Vol. 2, 593–616.Google Scholar
  42. Walker, J. and Yu, H.S. (2006). Adaptive finite element analysis of cone penetration in clay. Acta Geotechnica, Vol. 1 (in press).Google Scholar
  43. Xu, G.Q. (2006). Wellbore Stability in Geomechanics, Forthcoming PhD Thesis, University of Nottingham, UK.Google Scholar
  44. Yang, Y. and Yu, H.S. (2006a). Numerical simulations of simple shear with non-coaxial soil models, Int. J. Num. Analy. Meth. Geomech, Vol 30, 1–19.CrossRefGoogle Scholar
  45. Yang, Y. and Yu, H.S. (2006b). A non-coaxial critical state soil model and its application to simple shear simulations, Int. J. Num. Analy. Meth. Geomech. (in press).Google Scholar
  46. Yu, H.S. (1990). Cavity Expansion Theory and its Application to the Analysis of Pressurerneters. DPhil. Thesis, University of Oxford.Google Scholar
  47. Yu, H.S. (1991). A rational displacement interpolation function for axisymmetric finite element analysis of incompressible materials. Finite Elements in Analysis and Design, Vol. 10, 205–219.CrossRefGoogle Scholar
  48. Yu, H.S. (1994). State parameter from self-boring pressuremeter tests in sand. J. Geotech. Eng., ASCE, Vol. 120, 2118–2135.CrossRefGoogle Scholar
  49. Yu, H.S. (1995). A unified critical state model for clay and sand. Civil Engineering Research Report No 112.08.1995, University of Newcastle, NSW.Google Scholar
  50. Yu, H.S. (1998). CASM: A unified state parameter model for clay and sand. Int. J. Num. Analy. Meth. Geomech., Vol 22, 621–653.CrossRefGoogle Scholar
  51. Yu, H.S. (2004). In situ soil testing: from mechanics to interpretation-First J.K. Mitchell Lecture, Proc. 2nd International Conference on Site Characterisation (ISC2), Porto, Vol. 1, 3–38.Google Scholar
  52. Yu, H.S. and Khong, C.D. (2002). Application of a unified critical state model in finite element analysis, Proc. 3rd Conf. on 30 Finite Elements for Pavement Analysis Design and Research, Amsterdam, 253–267.Google Scholar
  53. Yu, H.S. and Netherton, M.D. (2000). Performance of displacement finite elements for modelling incompressible materials. Int. J. Num. Analy. Meth. Geomech., Vol. 24, 627–653.CrossRefGoogle Scholar
  54. Yu, H.S. and Yuan, X. (2005). The importance of accounting for non-coaxial behaviour in modelling soil-structure interaction, Proc. 11th Int Conf. of IACMAG, (Editors: G Barla and M. Barla), Patron Editore, Invited Issue Paper, Vol 4, 709–718.Google Scholar
  55. Yu, H.S. and Yuan, X. (2006). On a class of non-coaxial plasticity models for granular soils, Proc. R. Soc. A., Vol 462, 725–748.CrossRefGoogle Scholar
  56. Yu, H.S., Charles, M.T. and Khong, C.D. (2005). Analysis of pressuremeter geometry effects in clay using critical state models. Int. J. Num. Analy. Meth. Geomech., Vol. 29, 845–659.CrossRefGoogle Scholar
  57. Yu, H.S., Houlsby, G.T. and Burd, H.J. (1993). A novel isoparametric finite element displacement formulation for axisymmetric analysis of nearly incompressible materials. Int. J. Num. Meth. Eng., Vol. 36, 2453–2472.CrossRefGoogle Scholar
  58. Yu, H.S., Yang, Y. and Yuan, X. (2005). Application of non-coaxial plasticity models in geotechnical analysis. Proc. of 16th Int. Conf. of ISSMGE., Osaka, Vol. 2, 993–996.Google Scholar
  59. Yuan, X. (2005). Non-Coaxial Plasticity for Granular Soils, PhD Thesis, University of Nottingham, UK.Google Scholar
  60. Zienkiewicz, O.C., Taylor, R.L. and Too, T.M. (1971). Reduced integration technique in general analysis of plates and shells. Int. J. Num. Meth. Eng., Vol. 3, 275–290.CrossRefGoogle Scholar
  61. Zienkiewicz, O.C., Chan, A.H.C., Pastor, M., Schrefler, B.A. and Shiomi, T. (1998). Computational Geornechanics, Wiley.Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Personalised recommendations