Advertisement

Limit Analysis

Part of the Advances in Mechanics and Mathematics book series (AMMA, volume 13)

Keywords

Limit Analysis Limit Equilibrium Flow Rule Undrained Shear Strength Stability Number 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Alehossein H., Carter J.P. and Booker J.R. (1992). Finite element analysis of rigid footings on jointed rock. Proc. 3rd Int. Conf. Computational Plasticity, Vol. 2, 935–945.Google Scholar
  2. Anderheggen, E. and Knopfel, H. (1972). Finite element limit analysis using linear programming. Int. J. Solids and Structures., Vol. 8, 1413–1431.CrossRefGoogle Scholar
  3. Bishop, A.W. (1955). The use of the slip circle in the stability of slopes. Geotechnique., Vol 5, 7–17.Google Scholar
  4. Bottero, A., Negre, R., Pastor, J. and Turgeman, S. (1980). Finite element method and limit analysis theory for soil mechanics problems. Comput. Meth. Appl. Mech. Eng., Vol. 22, 131–149.CrossRefGoogle Scholar
  5. Chen, W.E (1975). Limit Analysis and Soil Plasticity, Elsevier, Amsterdam.Google Scholar
  6. Chen W.F. and Drucker D.C. (1969). Bearing capacity of concrete blocks or rock. J. Eng. Mech. Div., ASCE, Vol 95, 955–979.Google Scholar
  7. Chen, W.E and Liu, X.L. (1990). Limit Analysis in Soil Mechanics, Elsevier, Amsterdam.Google Scholar
  8. Collins, I.F. (1974). A note on the interpretation of Coulomb’s analysis of the thrust on a rough retaining wall in terms of the limit theorems of plasticity theory. Geotechnique., Vol. 24, 106–108.Google Scholar
  9. Cousins, B.E (1978). Stability charts for simple earth slopes. J. Geotech. Eng. Div., ASCE, Vol. 104, GT2, 267–279.Google Scholar
  10. Davis, E.H. (1968). Theories of plasticity and the failure of soil masses, In: Soil Mechanics: Selected Topics, (Editor: I. K. Lee), Butterworths, London, 341–380.Google Scholar
  11. Davis E.H. (1980). A note on some plasticity solutions relevant to the bearing capacity of brittle and fissured materials. Proc. Int. Conf. Struct. Foundations on Rock, Vol. 3, 83–90.Google Scholar
  12. Davis, R.O. and Selvadurai, A.P.S. (2002). Plasticity and Geomechanics, Cambridge University Press.Google Scholar
  13. Drescher, A. and Detournay, E. (1993). Limit load in translational failure mechanisms for associative and non-associative materials. Geotechnique., Vol. 43, 443–456.Google Scholar
  14. Drucker, D.C., Greenberg, H.J. and Prager, W. (1952). Extended limit design theorems for continuous media. Quart. J. Appl. Maths., Vol. 9, 381–389.Google Scholar
  15. Duncan, J.M. and Wright, S.G. (1980). The accuracy of equilibrium methods of slope stability analysis, Eng. Geology, Vol. 16, 5–17.CrossRefGoogle Scholar
  16. Duncan, J.M., Buchignani, A.L. and de Wet, M. (1987). An engineering manual for slope stability studies, Internal Research Report, Department of Civil Engineering, Virginia Tech, USA.Google Scholar
  17. Fellenius, W.O. (1926). Mechanics of Soils, Statika Gruntov, Gosstrollzdat.Google Scholar
  18. Fredlund, D.G. and Krahn, J. (1977). Comparison of slope stability methods of analysis, Can. Geotech. J., Vol. 14, 429–439.Google Scholar
  19. Gao, Y. (1988). Panpenalty finite element programming for plastic limit analysis, Comput. Struct., Vol. 28, 749–755.CrossRefGoogle Scholar
  20. Gibson, R.E. and Morgenstern, N. (1962). A note on the stability of cuttings in normally consolidated clays. Geotechnique., Vol. 12, 212–216.Google Scholar
  21. Graham, J. (1984). Methods of stability analysis. Chapter 6 In: Slope Instability, (Editors: D. Brunsden and D.B. Prior), Wiley.Google Scholar
  22. Himmelblau, D.M. (1972). iApplied Nonlinear Programming, McGraw-Hill Book Company, New York.Google Scholar
  23. Huh, H. and Yang, W.H. (1991). A general algorithm for limit solutions of plane stress problems. Int. J. Solids and Structures, Vol. 28, 727–738.CrossRefGoogle Scholar
  24. Hunter, J.H. and Schuster, R.L. (1968). ‘Stability of simple cuttings in normally consolidated clays’. Geotechnique, Vol. 18, 372–378.Google Scholar
  25. Janbu, N. (1954). Stability analysis of slopes with dimensionless parameters, Harvard Soil Mechanics Series, No. 46.Google Scholar
  26. Kim, J.K., Salgado, R. and Lovell, C.W. (1997). STABL-Instructions for Use. School of Civil Engineering, Purdue University.Google Scholar
  27. Kim, J.M., Salgado, R. and Yu, H.S. (1999). Limit analysis of soil slopes subjected to pore pressures. J. Geotech. Geoenviron. Eng., ASCE, Vol 125, 49–58.CrossRefGoogle Scholar
  28. Li, H.X. and Yu, H.S. (2005). Kinematic limit analysis of frictional materials using nonlinear programming. Int. J. Solids and Structures, Vol 42, 4058–4076.CrossRefGoogle Scholar
  29. Li, H.X. and Yu, H.S. (2006a). Limit analysis of composite materials based on an ellipsoid yield criterion. Int. J. Plasticity (in press).Google Scholar
  30. Li, H.X. and Yu, H.S. (2006b). Limit analysis of 2D and 3D structures based on an ellipsoid yield criterion. Int. J.Mech. Sci. (in press).Google Scholar
  31. Liu, Y.H., Cen, Z.Z. and Xu, B.Y. (1995). A numerical method for plastic limit analysis of 3D structures. Int. J. Solids and Structures, Vol 32, 1645–1658.CrossRefGoogle Scholar
  32. Lyamin, A. and Sloan S.W. (2002a). Upper bound limit analysis using linear finite elements and nonlinear programming. Int. J. Nurn. Analy. Meth. Geomech, Vol 26, 181–216.CrossRefGoogle Scholar
  33. Lyamin, A. and Sloan S.W. (2002b). Lower bound limit analysis using nonlinear programming. Int. J. Nurn. Meth. Eng., Vol 55, 573–616.CrossRefGoogle Scholar
  34. Lyamin, A., Yu, H.S., Sloan, S.W and Hossain, M.Z. (1998). Lower bound limit analysis of jointed rocks using the Hoek-Brown criterion. Australian Geomech. J., Vol 33, 46–62.Google Scholar
  35. Lysmer, J. (1970). Limit analysis of plane problems in soil mechanics. J. Soil Mech. and Found. Div., ASCE, Vol. 96, SM4, 1131–1334.Google Scholar
  36. Maier, G, Carvelli, G. and Cocchetti, G. (2000). On direct methods of shakedown and limit analysis. Plenary Lecture, 4th Euromech Solid Mechanics Conference, Metz, June.Google Scholar
  37. Merifield, R.S., Sloan, S.W. and Yu, H.S. (1999). Rigorous plasticity solutions for the bearing capacity of two layered clays. Geotechnique, Vol. 49,471–490.Google Scholar
  38. Merifield, R.S., Sloan, S.W. and Yu, H.S. (2001). Stability of plate anchors in undrained clay. Geotechnique, Vol. 51, 141–153.CrossRefGoogle Scholar
  39. Michalowski, R.L. (1989). Three-dimensional analysis of locally loaded slopes. Geotechnique., Vol. 39, 27–38.Google Scholar
  40. Michalowski, R.L. (1994). Limit analysis of slopes subjected to pore pressure. Computer Methods and Advances in Geomechanics, (Editors: Siriwardane and Zaman), 2477–2482.Google Scholar
  41. Miller, T.W. and Hamilton, J.H. (1989). A new analysis procedure to explain a slope failure at the Martin Lake mine. Geotechnique, Vol. 39, also see Discussion, Vol. 40, 145–147.Google Scholar
  42. Morgenstern, N.R. and Price, V.E. (1965). The analysis of the stability of generalized slip surfaces. Geotechnique, Vol. 15, 79–93.CrossRefGoogle Scholar
  43. Nagtegaal, J., Parks, D.M. and Rice, J.R. (1974). On numerically accurate finite element solutions in the fully plastic range. Comput. Meth. Appl. Mech. Eng., Vol. 4, 153–177.CrossRefGoogle Scholar
  44. Nash, D. (1987). A comparative review of limit equilibrium methods of stability analysis. Chapter 2 In: Slope Stability, (Editors: M.G. Anderson and K.S. Richards), John Wiley.Google Scholar
  45. Ponter, A.R.S. and Boulbibane, M. (2006). The linear matching method for limit load and shakedown analysis, In: Modern Trends in Geomechanics, (Editors: W. Wu and H.S. Yu), Springer.Google Scholar
  46. Potts, D. M. and Zdravkovic, L. (1999). Finite Element Analysis in Geotechnical Engineering: Theory, Thomas Telford, London.Google Scholar
  47. Prager, W. and Hodge, P.G. (1951). The Theory of Perfectly Plastic Solids, John Wiley and Sons, New York.Google Scholar
  48. Shield, R.T. (1954). Stress and velocity fields in soil mechanics, Quart. Appl. Math., Vol 12, 144–156.Google Scholar
  49. Sloan, S.W. (1988a). A steepest edge active set algorithm for solving sparse linear programming problems. Int. J. Num. Meth. Eng., Vol. 26, 2671–2685.CrossRefGoogle Scholar
  50. Sloan, S.W. (1988b). Lower bound limit analysis using finite elements and linear programming. Int. J. Num. Analy. Meth. Geomech., Vol. 12, 61–77.CrossRefGoogle Scholar
  51. Sloan, S.W. (1989). Upper bound limit analysis using finite elements and linear programming. Int. J. Num. Analy. Meth. Geomech., Vol. 13, 263–282.CrossRefGoogle Scholar
  52. Sloan, S.W. (1995). ‘Limit analysis in geotechnical engineering’. in: Modern Developments in Geomechanics (Editor: C.M. Haberfield), Proc. of Ian Donald Symposium, Monash University, Australia, 167–199.Google Scholar
  53. Sloan, S.W. and Kleeman, P.W. (1995). Upper bound limit analysis using discontinuous velocity fields. Computer Meth. Appl. Mech. Eng., Vol. 127, 293–314.CrossRefGoogle Scholar
  54. Sloan S.W. and Randolph M.F. (1982). Numerical prediction of collapse load using finite elements and linear programming. Int. J. Num. Analy. Meth. Geomech, Vol 6, 47–76.CrossRefGoogle Scholar
  55. Spencer, E. (1967). A method of analysis of the stability of embankments assuming parallel inter-slice forces. Geotechnique., Vol. 17, 11–26.Google Scholar
  56. Sutcliffe, D.J., Yu, H.S. and Page, A.W. (2001). Lower bound limit analysis of unreinforced masonry shear walls, Comput. Struct., Vol. 79, 1295–1312.CrossRefGoogle Scholar
  57. Sutcliffe, D.J., Yu, H.S. and Sloan, S.W. (2004). Lower bound solutions for bearing capacity of jointed rock. Comput. Geotech., Vol. 31, 23–36.CrossRefGoogle Scholar
  58. Taylor, D.W. (1948). Fundamentals of Soil Mechanics, Wiley, New York.Google Scholar
  59. Terzaghi, K. (1943). Theoretical Soil Mechanics, Wiley, New York.Google Scholar
  60. Whitman, R.W. and Bailey, W.A. (1967). Use of computers for slope stability analysis. J. Soil Mech. and Found. Div., ASCE, Vol. 93, SM4, 475–498.Google Scholar
  61. Yu, H.S. and Netherton, M. (2000). Performance of displacement finite elements for modelling incompressible materials. Int. J. Num. Analy. Meth. Geomech., Vol. 24, 627–653.CrossRefGoogle Scholar
  62. Yu, H.S. and Sloan, S.W. (1991a). Lower bound limit analysis of axisymmetric problems using finite elements and linear programming, Proc. 6th Int. Conf. in Australia on Finite Elements, Sydney, Vol.I, 48–52.Google Scholar
  63. Yu, H.S. and Sloan, S.W. (1991b). Lower bound limit analysis of plane problems in soil mechanics, Proc. Int. Conf. of Nonlinear Engineering Computations, Swansea, 329–338.Google Scholar
  64. Yu, H.S. and Sloan, S.W. (1994a). A note on bearing capacity of soft clays under embankments, J. Geotech. Eng., ASCE, Vol. 120 (I), 246–255.Google Scholar
  65. Yu, H.S. and Sloan, S.W. (1994b). Upper bound limit analysis of a rigid-plastic body with frictional interfaces. Int. J. Mech. Sci., Vol. 36, 219–229.CrossRefGoogle Scholar
  66. Yu, H.S. and Sloan, S.W. (1994). Bearing capacity of jointed rock. In: Compter methods and Advances in Geomechanics, (Editors: Siriwardane and Zaman), 2403–2408.Google Scholar
  67. Yu, H.S. and Sloan, S.W. (1995). Limit analysis of anisotropic soils using finite elements and linear programming. Mech. Res. Comrnu., Vol. 21 545–554.CrossRefGoogle Scholar
  68. Yu, H.S. and Sloan, S.W. (1997). Finite element limit analysis of reinforced soils. Comput. Struct., Vo1 63, 567–577.CrossRefGoogle Scholar
  69. Yu H.S., Houlsby, G.T. and Burd, H.J. (1993). A novel isoparametric finite element displacement formulation for axisymmetric analysis of nearly incompressible materials. Int. J. Num. Meth. Eng., Vol 36, 2453–2472.CrossRefGoogle Scholar
  70. Yu, H.S., Salgado, R., Sloan, S.W. and Kim, J.M. (1998). Limit analysis versus limit equilibrium for slope stability. J. Geotech. Geoenviro. Eng., ASCE, Vol 124, 1–11.CrossRefGoogle Scholar
  71. Yu, H.S., Sloan, S.W. and Kleeman, P.W. (1994). A quadratic element for upper bound limit analysis. Engineering Computations, Vol. 11, 195–212.Google Scholar
  72. Zhang, P.X., Lu, M.W. and Hwang, K. (1991). A mathematical programming algorithm for limit analysis. Acta Mechanica Sinica., Vol. 7, 267–274.CrossRefGoogle Scholar
  73. Zouain, N., Herskovits, J. and Borges, L.A. (1993). An iterative algorithm for limit analysis with nonlinear yield functions. Int. J. Solids and Structures., Vol. 32, 1645–1658.Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Personalised recommendations