Advertisement

Science of Clinch–Adhesive Joints

  • Alessandro Pirondi
  • Fabrizio Moroni
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 6)

Abstract

The idea of “hybrid joints” arises from the need of joining together materials, producing a tough, stiff and lightweight joint. The core concept is: use two different joining techniques, with the aim to increase the strength and gather the advantages of each technique, reducing the drawbacks. This chapter is devoted to clinch–adhesive (also called clinchbonded) joints, which is of particular interest for the chassis manufacturing in vehicles (automotive, trucks, buses, railways) but also of the nautical and ropeways applications. First, an overview of clinching, adhesive bonding and clinch–adhesive joint characteristics is given. The experimental details and the design of experiments plan are then described and the result are shown and discussed comparing the performances in terms of stiffness, strength and energy absorption to failure of simple and hybrid joints. Since one of the most important needs of the industry is the possibility to simulate mechanical behavior of the joint up to failure, damage models have been applied to the finite element analysis of the simple and hybrid joints and the results are shown in the last paragraph.

Keywords

Energy Absorption Adhesive Layer Adhesive Bonding Adhesive Joint Double Cantilever Beam 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Aravas, N.: On the Numerical integration of a class of pressure-dependent plasticity models. Int. J. Numer. Methods Eng. 24, 1395–1416 (1987)CrossRefGoogle Scholar
  2. 2.
    Carboni, M., Beretta, S., Monno, M.: Fatigue behaviour of tensile-shear loaded clinched joints. Eng. Fract. Mech. 73, 178–190 (2006) CrossRefGoogle Scholar
  3. 3.
    Chu, C., Needleman, A.: Void nucleation effects in biaxially stretched sheets. J. Eng. Mater. Tech. 102, 249–256 (1980) CrossRefGoogle Scholar
  4. 4.
    de Paula, A.A., Aguilar, M.T.P., Pertence, A.E.M., Cetlin, P.R.: Finite element simulations of the clinch joining of metallic sheets. J. Mater. Process. Technol. 182, 352–357 (2007)CrossRefGoogle Scholar
  5. 5.
    Del Gamba, L.: Studio teorico e sperimentale del comportamento di unioni ottenute per clinciatura con o senza incollaggio (Experimental and numerical study of the behaviour of clinched and clinchbonded joints). Graduation Thesis, University of Pisa, Pisa, Italy (2005)Google Scholar
  6. 6.
    Hamel, V., Roelandt, J.M., Gacel, J.N., Schmit, F.: Finite element modeling of clinch forming with automatic remeshing. Comput. Struct. 77, 185–200 (2000)CrossRefGoogle Scholar
  7. 7.
    Li, S., Thouless, M.D., Waas, A.M., Schroeder, J.A., Zavattieri, P.D. Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite. Compos. Sci. Tech. 65, 281–293 (2005)CrossRefGoogle Scholar
  8. 8.
    Li, S., Thouless, M.D., Waas, A.M., Schroeder, J.A., Zavattieri, P.D.: Mixed-mode cohesive-zone models for fracture of an adhesively-bonded polymer-matrix composite. Eng. Fract. Mech. 73, 64–78 (2006)CrossRefGoogle Scholar
  9. 9.
    Krenk, S. (1992) Energy release rate of symmetric adhesive joints. Eng. Fract. Mech. 43, 549–559CrossRefGoogle Scholar
  10. 10.
    Needleman, A.: A numerical study of necking in circular cylindrical bars. J. Mech. Phys. Solids 20, 111–127 (1972)CrossRefGoogle Scholar
  11. 11.
    Needleman, A.: A continuum model for void nucleation by inclusion debonding. J. Appl. Mech. 54, 525–531 (1987)CrossRefGoogle Scholar
  12. 12.
    Needleman, A., Tvergaard, V.: Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32, 157–169 (1984)CrossRefGoogle Scholar
  13. 13.
    Needleman, A., Tvergaard, V.: Material Strain-Rate Sensitivity in the Round Tensile Bar. Brown University Report, Division of Engineering, Providence, USA (1985)Google Scholar
  14. 14.
    Petrie, E.M.: Handbook of Adhesives and Sealants. McGraw-Hill, UK (2000)Google Scholar
  15. 15.
    Pirondi, A.: Influence of cohesive law shape and adhesive modelling on the failure prediction of T-peel joints. In: Proceedings of XVI European Congress of Fracture, Alexandroupolis, Greece (2006)Google Scholar
  16. 16.
    SIMULIA: ABAQUS® User’s Manual, Ver. 6.7 (2007)Google Scholar
  17. 17.
    Tvergaard, V.: Influence of voids on shear band instabilities under plane strain conditions. Int. J. Fract. 17, 389–407 (1981)CrossRefGoogle Scholar
  18. 18.
    Tvergaard, V., Hutchinson, J.: The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40, 1377–1397 (1992)CrossRefGoogle Scholar
  19. 19.
    Varis, J.: Ohutlevyjen Puristusliittäminen (Clinching of Sheet Metals). Federation of Finnish Metal, Engineering and Electrotechnical Industries, MET, Helsinki, Finland (1997)Google Scholar
  20. 20.
    Varis, J.: Kuumasinkityn lujan rakenneteräksen puristusliitt¨aminen (Clinching of zinc-coated high strength structural steel). Research Report No. 27, Lappeenranta University of Technology, Department of Mechanical Engineering, Lappeenranta, Finland (1998)Google Scholar
  21. 21.
    Varis J., Lepisto J.: A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters. Thin-Walled Struct. 41, 691–709 (2003)CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2010

Authors and Affiliations

  1. 1.Dipartimento di Ingegneria IndustrialeUniversità degli Studi di ParmaParmaItaly

Personalised recommendations