Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
G.I. Taylor, “Stability of a Viscous Liquid Contained Between Two Rotating Cylinders”, Phil. Trans., A223, 1923, pp. 289–343.; Proc. Roy. Soc.(London), A151, 1935, p. 494; ibid, A157, 1936, p. 546 and p. 565.
B.A. Toms, “Some Observations on the Flow of Linear Polymer Solutions Through Straight Tubes at Large Reynolds Numbers”, Proc. of 1st International Congress on Rheology, North Holland Publishing Co., Amsterdam, Vol. 2, 1949, pp. 135-.
D.F. Wilcock, “Turbulence in High-Speed Journal Bearings”, Trans. ASME, Vol. 72, August 1950, pp. 825–834.
J. Laufer, “The Structure of Turbulence in Fully Developed Pipe Flow”, NACA Tech. Report 1174, Washington, D.C., 1953.
E.R. van Driest, “On Turbulent Flow Near a Wall”, Journal of Aeronautical Science, Vol. 23, No. 11, November 1956, pp. 1007–1011.
H. Reichardt, “Über die Geschwindigkeitsverteilung in einer geradlinigen turblenten Couettestroemung”, ZAMM-Sonderheft, Vol. 36 (1956), pp. S 26–S 29.
V.N. Constantinescu, “On Turbulent Lubrication”, Proceedings of the Institution of Mechanical Engineers, Vol. 173, 1959, pp. 881–900.
R.C. DiPrima, “A Note on the Stability of Flow in Loaded Journal Bearings”, ASLE Trans., Vol. 6, 1963, pp. 249–253.
Chung-Wah Ng and C.H.T. Pan, “A Linearized Turbulent Lubrication Theory”, Journal of Basic Engineering, Trans. ASME, Series D, Vol. 87, September 1965, pp. 675–688.
I. Tani, “Nagare-Gaku (Study of Flow)” (in Japanese), Iwanami Zensho Series, Iwanami Shoten, Tokyo, 1967.
F.K. Orcut and E.B. Arwas, “The Steady-State and Dynamic Characteristics of a Full Circular Bearing and a Partial Arc Bearing in the Laminar and Turbulent Flow Regimes”, Journal of Lubrication Technology, Trans. ASME, Series F, Vol. 89, April 1967, pp. 143–153.
H.G. Elrod, Jr. and C.W. Ng, “A Theory of Turbulent Fluid Films and its Application to Bearings”, Journal of Lubrication Technology, Trans. ASME, Series F, Vol. 89, No. 3, 1967, pp. 346–362.
J.H. Vohr, “An Experimental Study of Taylor Vortices and Turbulence in Flow Between Eccentric Rotating Cylinders”, Journal of Lubrication Technology, Trans. ASME, Series F, Vol. 90, No. 1, 1968, pp. 285–296.
M. Shirakura and H. Ohashi, “Fluid Mechanics” (in Japanese), Corona Publishing Co., Ltd., Tokyo, 1969.
C.M. Taylor, “Turbulent Lubrication Theory Applied to Fluid Film Bearing Design”, Paper 6, Proceedings of the Institution of Mechanical Engineers, Vol. 184, 1969–70, Pt. 3L, pp. 40–47.
E.R. Booser, A. Missana and F.D. Ryan, “Performance of Large Steam Turbine Journal Bearings”, ASLE Transactions, Vol 13, 1970, pp. 262–268.
H. Aoki and M. Harada, “Turbulent Lubrication Theory for Full Journal Bearings” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 16, No. 5, May 1971, pp. 348–356.
P. Castle, F.R. Mobbs and P.H. Markho, “Visual Observations and Torque Measurements in the Taylor Vortex Regime Between Eccentric Rotating Cylinders”, Journal of Lubrication Technology, Trans. ASME, Series F, Vol. 93, No. 1, 1971, pp. 121–128.
J.W. Hoyt, “The Effect of Additives on Fluid Friction”, A Lecture, Journal of Basic Engineering, Trans. ASME, Series D, Vol. 94, June 1972, pp. 258–285.
B.E. Launder and D.B. Spalding, “Lectures in Mathematical Models of Turbulence”, Academic Press, London, 1972
W.P. Jones and B.E. Launder, “The Prediction of Laminarization with a Two-Equation Model of Turbulence”, International Journal of Heat Mass Transfer, Vol. 15, 1972, pp. 301–313.
W.P. Jones and B.E. Launder, “The Calculation of Low-Reynolds-Number Phenomena with a Two-Equation Model of Turbulence”, International Journal of Heat Mass Transfer, Vol. 16, 1973, pp. 1119–1130.
H. Aoki, T. Kusaga, H. Tada, H. Sasaki, “A Study on Drag Reduction of Dilute Polymer Solutions in Annular Flow between Rotating Cylinders”, Colloques Internationaux du C.N.R.S., Vol. 223, 1975, pp. 345–348.
L.G. Hampson and H. Naylor, “Friction Reduction in Journal Bearing by High Molecular Weight Polymers”, Proc. the 2nd Leads-Lyon Symposium on Tribology, Mechanical Engineering Publications Ltd., London, September 1975, pp. 70–72.
S. Hassid and M. Poreh, “A Turbulent Energy Dissipation Model for Flows With Drag Reduction”, Journal of Fluids Engineering, Trans. ASME, Vol. 100, No. 1, March 1978, pp. 107–112.
S. Wada and H. Hashimoto, “Turbulent Lubrication Theory Using the Frictional Law (First Report, Derivation of Turbulent Coefficient and Lubrication Equation)” (in Japanese), Trans. JSME, Vol. 44, No. 382, June 1978, pp. 2140–2148.
S. Wada and H. Hashimoto, “Ditto (Second Report, Its Application to Journal Bearing)” (in Japanese), Trans. JSME, Vol. 44, No. 382, June 1978, pp. 2149–2156.
R.E. Hinton and J.B. Roberts, “The Characteristics of a Statically Loaded Journal Bearing with Superlaminar Flow”, Journal of Mechanical Engineering Science, IMechE, London, Vol. 22, No. 2, 1980, pp. 79–94.
H. Fukayama, M. Tanaka and Y. Hori, “Friction Reduction in Turbulent Journal Bearings by Highpolymers”, Journal of Lubrication Technology, Trans. ASME, Series F, Vol. 102, No. 4, October 1980, pp. 439–444.
T. Kato and Y. Hori, “Taylor Vortices in a Journal Bearing” (in Japanese), Trans. JSME, Vol. 49, No. 445, September 1983, pp. 1510–1520.
T. Kato and Y. Hori, “Turbulent Lubrication Theory Using k-ε Model for Journal Bearings” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 28, No. 12, December 1983, pp. 907–914.
S. Kaneko, Y. Hori and M. Tanaka, “Static and Dyanmic Characteristics of Annular Plain Seals”, Proc. of Third International Conference on Vibrations in Rotating Machinery, IMechE, Univ. of York, England, September 11–13, 1984, pp. 205–214.
Y. Hori, H. Fukayama, M. Tanaka, T. Kato and S. Kaneko. “Turbulent Lubrication Theory for Annular Plain Seals” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 30, No. 6, June 1985, pp. 430–437.
T. Kato and Y. Hori, “Pressure Distributions in a Journal Bearing Lubricated by Drag Reducing Liquids under Turbulent Conditions”, Proceedings JSLE International Tribology Conference, July 8–10, 1985, Tokyo, Japan, pp. 571–576.
S. Kaneko, Y. Hori, T. Kato and M. Tanaka, “Static Characteristics of Annular Plain Seals in the Turbulent Regime” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 31, No. 7, July 1986, pp. 493–500.
S. Kaneko, Y. Hori and M. Tanaka, “Dynamic Characteristics of Annular Plain Seals in the Turbulent Regime (First Report, Theoretical Analysis)” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 31, No. 9, September 1986, pp. 650–657.
S. Kaneko, Y. Hori and M. Tanaka, “Dynamic Characteristics of Annular Plain Seals in the Turbulent Regime (Second Report, Experimental Analysis)” (in Japanese), Journal of Japan Society of Lubrication Engineers, Vol. 32, No. 2, February 1987, pp. 141–147.
H.K. Myong and N. Kasagi, “A New Proposal for a k-ε Turbulence Model and Its Evaluation (First Report, Development of the Model)” (in Japanese), Trans. JSME, C, Vol. 54, No. 507, November 1988, pp. 3003–3009.
C. Arakawa, “Computational Fluid Dynamics for Engineering” (in Japanese), University of Tokyo Press, Tokyo, 1994.
T. Kajishima, “Numerical Simulation of Turbulent Flows” (in Japanese), Yokendo Ltd., Tokyo, 1999.
Rights and permissions
Copyright information
© 2006 Springer-Verlag Tokyo
About this chapter
Cite this chapter
(2006). Turbulent Lubrication. In: Hydrodynamic Lubrication. Springer, Tokyo. https://doi.org/10.1007/4-431-27901-6_9
Download citation
DOI: https://doi.org/10.1007/4-431-27901-6_9
Publisher Name: Springer, Tokyo
Print ISBN: 978-4-431-27898-6
Online ISBN: 978-4-431-27901-3
eBook Packages: EngineeringEngineering (R0)