Abstract
A hybrid of type-1 and type-2 fuzzy model is proposed, which is applied in controlling the surface roughness of mechanical workpiece in metal cutting manufacturing. There are dozens of factors that affect the quality of surface roughness. The factors can be divided into two groups that are controlled and uncontrolled factors, e.g. feed rate can be setup. Therefore it is controlled factor while tool wear is an example of uncontrolled factor. There are two kinds of factors respectively correspond to type-1 and type-2 solutions because type-1 is suitable for controlled factors and type-2 fuzzy logic can handle uncontrolled or uncertain inputs. The proposed study will use genetic algorithm to identify the significant factors during the cutting process and a mathematical model that can predict the surface roughness under process variations. A fuzzy set based model for metal cutting operations can be used to reliably predict surface roughness under variations so that a continuous control of surface roughness can be affirmed. Two main factors (feed rate and tool wear) which affect the quality of surface roughness are investigated and simulated. The result of simulation shows that hybrid fuzzy logic system has improved precision of output.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. C. C. Luke Huang, “A Multiple Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer,” vol. 17, 2001.
J. C. C. C. M. L. Mike S. Lou, “Surface Roughness Prediction Technique For CNC End-Milling,” Journal of Industrial Technology, vol. 15, 1999.
J. M. Mendel, Uncertain rule-based fuzzy logic systems : introduction and new directions. Upper Saddle River, NJ: Prentice Hall PTR, 2001.
J. M. Qilian Liang, Mendel, “Interval type-2 fuzzy logic systems: theory and design,” IEEE Transactions on Fuzzy Systems, vol. 8, pp. 535–550, 2000.
N. N. K., J. M. Mendel, “Operations on type-2 fuzzy sets,” Fuzzy sets and system, 2001.
N. N. M. Karnik, J. M. Qilian Liang, “Type-2 fuzzy logic systems,” IEEE Transactions on Fuzzy Systems, vol. 7, pp. 643–658, Dec 1999.
Reza Langari, “Fuzzy logic applications to control engineering,” SPIE Proceedings, vol. 2061, pp. 2–7, Dec, 1993.
S. A. S. Coker, Y.C., “In-process Control of Surface Roughness Due to Tool Wear using a New Ultrasonic System,,” International Journal Machine Tools Manufacturing, vol. 36, pp. 411, 1996.
S. Kalpakjian, “Manufacturing Processes for Engineering Materials, 3rd edition,” Addision Wesley, 1997.
T. Hessburg, “Automatic design of fuzzy systems using genetic algorithms and its applications to lateral vehicle guidance,” SPIE Proceedings, vol. 2061, pp. 452–463, Dec, 1993.
John R. Koza, “ Genetic Programming: On the Programming of Computers by Means of Natural Selection” MIT Press, 1992
John R. Koza, “Survey of genetic algorithms and genetic programming”. Proceedings of 1995 WESCON Conference. Piscataway, NJ: IEEE. 589–594, 1995e.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
Jiang, F., Li, Z., Zhang, YQ. (2006). Hybrid Type-1-2 Fuzzy Systems for Surface Roughness Control. In: Abraham, A., de Baets, B., Köppen, M., Nickolay, B. (eds) Applied Soft Computing Technologies: The Challenge of Complexity. Advances in Soft Computing, vol 34. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-31662-0_25
Download citation
DOI: https://doi.org/10.1007/3-540-31662-0_25
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-31649-7
Online ISBN: 978-3-540-31662-6
eBook Packages: EngineeringEngineering (R0)