Structural Inhibited Plastics

Part of the Springer Series in Materials Science book series (SSMATERIALS, volume 82)

Keywords

Wear Rate Stress Corrosion Crack Friction Joint Friction Pair Thermally Stimulate Current 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    P.I. Blau. Friction and Wear Transitions of Materials: Break-in, Run-in, Wear-in (Materials Sci. and Process Technol. Series). Park Ridge, New Jersey, Noyes Publications, 1989.Google Scholar
  2. 2.
    G.E. Lazarev and G.A. Preis. Friction and Wear in Aggressive Media. In: Tribology — Lubrication, Friction, and Wear, Eds. I.V. Kragelsky and V.V. Alisin, Professional Engineering Publishing. London and Bury St Edmunds, UK, 2001, pp. 371–389.Google Scholar
  3. 3.
    G. Heinicke. Tribochemistry. Berlin, Akademic-Verlag, 1984.Google Scholar
  4. 4.
    M.J. Furey. Tribology. In: Encyclopedia of Materials Science and Engineering, ed. M.B. Bever. Oxford, Pergamon Press, 1986, pp. 5145–5157.Google Scholar
  5. 5.
    D. Rigney and R.G. Bayer. Wear of Materials. Amsterdam, Elsevier, 1997.Google Scholar
  6. 6.
    R.Y. Lee and Z. Eliezer. On the critical thickness of protective films at sliding interfaces. Wear, 1984, Vol. 95, No. 2, pp. 165–175.CrossRefGoogle Scholar
  7. 7.
    J. Molgaard. A discussion of oxidation, oxide thickness and oxide transfer in wear. Wear, 1976, Vol. 40, No. 3, pp. 277–291.CrossRefGoogle Scholar
  8. 8.
    P.J. Blau and C.D. Olson. Application of thermal wave microscopy to research on the sliding wear break-in behavior of tarnished Cu — 15 wt % Zn alloy. Wear of Materials, Proc. ASME Conf., ASME, New York, 1985, pp. 425–431.Google Scholar
  9. 9.
    T.S. Eyre and D. Maynard. Surface aspects of unlubricated metal-to-metal wear. Wear, 1971, Vol. 18, No. 4, pp. 301–310.CrossRefGoogle Scholar
  10. 10.
    N.C. Welsh. Frictional heating and its influence on the wear of steel. J. Appl. Phys., 1957, Vol. 28, No. 9, pp. 960–968.CrossRefGoogle Scholar
  11. 11.
    T.F.J. Quinn. The effect of “hot-spot” temperatures on the unlubricated wear of stells. ASLE Trans, 1967, Vol. 10, pp. 158–168.Google Scholar
  12. 12.
    T.F.J. Quinn, J.L. Sullivan and D.M. Rowson. New developments in the oxidational theory of the mild wear of metals. Wear of Materials, 2nd Intern. Conf., ASME, New York, 1979, pp. 1–11.Google Scholar
  13. 13.
    J. Glascott, F.H. Stott and G.C. Wood. The transition from severe to mild sliding wear for Fe — 12% Cr — base alloys at low temperatures. Wear, 1984, Vol. 97, No. 2, pp. 155–178.CrossRefGoogle Scholar
  14. 14.
    P.T. Newman and J. Skinner. The high temperature sliding wear of stainless steel in CO2 atmosphere — The effect of adding low concentrations of O2. Wear, 1986, Vol. 112, No. 3–4, pp. 291–325.CrossRefGoogle Scholar
  15. 15.
    D. Krajcinovic. Damage Mechanics (North-Holland Series in Applied Mathematics and Mechanics, Vol. 41). Amsterdam, North-Holland Elsevier Sci., 1996.Google Scholar
  16. 16.
    I.V. Kragelsky. Friction and Wear, Pergamon, Elmsford, 1982.Google Scholar
  17. 17.
    G.A. Preis. On the nature of corrosion-mechanical wear of metals. Soviet J. Friction and Wear, 1987, Vol. 8, No. 5, pp. 16–20.Google Scholar
  18. 18.
    G.A. Preis and A.G. Dzyub. Electrochemical phenomena in metal friction. Soviet J. Friction and Wear, 1980, Vol. 1, No. 2, pp. 18–31.Google Scholar
  19. 19.
    H.H. Uhlig and R.W. Revie. Corrosion and corrosion control. An introduction to corrosion science and engineering, 3rd edn., NY, John Wiley and Sons, 1985.Google Scholar
  20. 20.
    R.W. Staehle. Fundamental aspects of Stress Corrosion Cracking. Houston, Texas, National Association of Corrosion Engineers, 1969.Google Scholar
  21. 21.
    O. Devereux, ed. Corrosion fatigue: Chemistry, mechanics and microstructure. Houston, Texas, National Association of Corrosion Engineers, 1972.Google Scholar
  22. 22.
    S.N. Postnikov. Electrofhysical and Electrochemical Phenomena in Friction, Cutting, and Lubrication. NY, Van Nostrand Reinhold Co., 1978.Google Scholar
  23. 23.
    G.D. Parfitt and C.H. Rochester, eds. Adsorption from Solution at the Solid/Liquid Interface. London, NY, Academic Press, 1983.Google Scholar
  24. 24.
    G.P. Shpenkov. Friction Surface Phenomena (Tribology Series, Vol. 29). Amsterdam, Elsevier Science, 1995.Google Scholar
  25. 25.
    F.P. Bowden and D. Tabor. The Friction and Lubrication of Solids. Oxford, Clarendon Press, 1986.Google Scholar
  26. 26.
    D.N. Garkunov, I.V. Kragelsky and A.A. Polyakov. Selective Transfer in Friction Joints. Moscow, Transport, 1969.Google Scholar
  27. 27.
    A.A. Polyakov, D.N. Garkunov and I.V. Kragelsky. Physico-chemical mechanics of inhibiting wear in the phenomenon of selective transfer. Proc. USSR AS, 1970, Vol. 191, No. 4, pp. 821–823.Google Scholar
  28. 28.
    A.S. Kuzharov, R. Marchak, Ya. Guzik, et al. Self-organization in a brass-glycerin-steel tribosystem. J. Friction and Wear, 1996, Vol. 17, No. 1, pp. 107–115.Google Scholar
  29. 29.
    A.S. Kuzharov, V.E. Burlakova, R. Marchak, et al. Influence of friction on the electrochemical characteristics of the friction contact at the initial stage of selective transfer. J. Friction and Wear, 1998, Vol. 19, No. 1, pp. 73–76.Google Scholar
  30. 30.
    G.E. Lazarev, K.I. Afanas’ev and N.I. Gamazov. Study of the corrosion-mechanical wear process. Soviet J. Friction and Wear, 1984, Vol. 5, No. 5, pp. 99–104.Google Scholar
  31. 31.
    G.E. Lazarev, T.L. Kharlamova and V.I. Vereikin. Friction and wear of materials in aggressive media. Soviet J. Friction and Wear, 1981, Vol. 2, No. 1, pp. 32–39.Google Scholar
  32. 32.
    I.V. Hurey and M.I. Pashechko. Electrochemical characteristics of secondary structures formed in sliding friction of carbon steels. J. Friction and Wear, 2000, Vol. 21, No. 2, pp. 71–74.Google Scholar
  33. 33.
    G.E. Lazarev. Basic patterns of wear of corrosion-resistant steels and alloys during friction in electrolytes. Soviet J. Friction and Wear, 1987, Vol. 8, No. 2, pp. 22–28.Google Scholar
  34. 34.
    V.A. Goldade, V.A. Struk and S.S. Pesetski. Wear Inhibitors of Metal-Polymer Systems, Moscow, Khimia, 1993.Google Scholar
  35. 35.
    G.A. Gorokhovsky. Surface Dispersion of Dynamically Contacting Polymers and Metals. Kiev, Naukova Dumka, 1972.Google Scholar
  36. 36.
    E.A. Stambursky, A.I. Beil, V.P. Karlivan and Yu.A. Bespalov. Wear of Equipment at Plastics Processing, Moscow, Mashinostroenie, 1985.Google Scholar
  37. 37.
    L.S. Pinchuk and V.A. Goldade. Wear inhibitors for metals in polymer-metal friction pairs. J. Friction and Wear, 1994, Vol. 15, No. 6, pp. 75–81.Google Scholar
  38. 38.
    V.A. Belyi, A.I. Sviridenok, M.I. Petrokovets and V.G. Savkin. Friction and Wear in Polymer-Based Materials. Oxford, Pergamon Press, 1982.Google Scholar
  39. 39.
    J.S. Williams, R.G. Elliman and M.C. Ridgway. Ion Beam Modification of Materials. Amsterdam, North-Holland, 1996.Google Scholar
  40. 40.
    L.B. Loeb. Ststic Electrification. Berlin, Springer-Verlag, 1958.Google Scholar
  41. 41.
    B.V. Deryagin, N.A. Krotova and V.P. Smilga. Adhesion of Solids. Moscow, Nauka, 1973.Google Scholar
  42. 42.
    M.I. Kornfeld. Frictional electrification. J. Phys. D: Appl. Phys., 1976, Vol. 9, No. 8, pp. 1183–1192.CrossRefGoogle Scholar
  43. 43.
    V.E. Shashoua. Static electricity in polymers. I. Theory and measurement. J. Polymer Sci., 1958, Vol. 33, No. 126, pp. 65–85; Static electricity in polymers. II. Chemical structure and antistatic behavior. J. Polymer Sci., Part A: General Papers, 1963, Vol. 1, No. 1, pp. 169–187.CrossRefGoogle Scholar
  44. 44.
    G.S. Rose and S.G. Ward. Contact electrification across metal-dielectric and dielectric-dielectric interfaces. Brit. J. Appl. Phys., 1957, Vol. 8, No. 3, pp. 121–126.CrossRefGoogle Scholar
  45. 45.
    G.M. Sessler, ed. Electrets. 2nd edn., Berlin, Springer-Verlag, 1987.Google Scholar
  46. 46.
    J. Van Turnhout. Thermally Stimulated Discharge of Polymer Electrets. Amsterdam, Elsevier Publ. Co., 1975.Google Scholar
  47. 47.
    A.I. Sviridenok, A.E. Klimovich and V.N. Kestelman. Electrophysical Phenomena in the Tribology of Polymers. Amsterdam, Gordon and Breach Sci. Publ., 1999.Google Scholar
  48. 48.
    V.S. Mironov. Influence of sliding speed on parameters of triboelectret state in polymer coatings. Soviet J. Friction and Wear, 1989, Vol. 10, No. 1, pp. 69–72.Google Scholar
  49. 49.
    S.I. Guzenkov, Yu.V. Gromyko and A.F. Klimovich. On electret-triboelectrization superposition in friction of a composite with electret filler. Soviet J. Friction and Wear, 1987, Vol. 8, No. 1, pp. 107–110.Google Scholar
  50. 50.
    A.K. Vijh. Electrochemical effects as the source of electromotive force in M1-polymer-M2 systems. J. Appl. Phys., 1978, Vol. 49, No. 6, pp. 3621–3624.CrossRefGoogle Scholar
  51. 51.
    J.P. Crine and A.K. Vijh. The electrochemical origins of open-circuit voltage observed during heating of metal-polymer-metal systems. Materials Chem. and Phys., 1984, Vol. 11, pp. 85–98.CrossRefGoogle Scholar
  52. 52.
    R.P. Bhardwaj, J.K. Quamara, K.K. Nagpaul and B.L. Sharma. Thermally stimulated spontaneous current from Kapton polyamide-metal contacts. Phys. Stat. Sol. (a), 1983, Vol. 80, pp. 325–332.Google Scholar
  53. 53.
    C.W. Cien and J.B. Schelenoff. Limiting battery performance parameters for polyacetylene. Nature, 1984, Vol. 311, No. 5984, pp. 360–363.CrossRefGoogle Scholar
  54. 54.
    V.A. Goldade and L.S. Pinchuk. Electret Plastics: Physics and Materials Science. Minsk, Nauka i Tekhnika, 1987.Google Scholar
  55. 55.
    V.N. Kestelman, L.S. Pinchuk and V.A. Goldade. Electrets in Engineering: Fundamentals and Applications. Boston/Dordrecht/London, Kluwer Academic Publ., 2000.Google Scholar
  56. 56.
    M. Ieda, G. Sawa, Sh. Nakamura and Y. Nishio. A spontaneous current from the metal(1)-polymer-metal(2) system. J. Appl. Phys., 1975, Vol. 46, No. 6, pp. 2796–2798.CrossRefGoogle Scholar
  57. 57.
    L.S. Pinchuk, V.A. Goldade and A.S. Neverov. About electrical phenomena in metal-polymer moving joints. Proc. of Soviet Conf. “Theory of friction, wear and lubrication”, Tashkent, 1975, Vol. 2, pp. 145–146.Google Scholar
  58. 58.
    A.U. Shareef, K.K. Saraf and A.P. Srivastava. Spontaneous electric current from polyvinyl alcohol induced by the first heating run. Phys. Stat. Sol. (a), 1983, Vol. 77, pp. 381–386.Google Scholar
  59. 59.
    V.A. Goldade. Investigation of some physical-chemical phenomena during design and exploitation of metal-polymer systems. Ph. D Thesis, Riga, 1980.Google Scholar
  60. 60.
    V.A. Goldade. About electrochemical mechanism of metal-polymer electrets formation. Vysokomolecul. Soedinenia, 1989, Vol. B31, No. 1, pp. 13–17.Google Scholar
  61. 61.
    I.M. Vertyachikh, V.A. Goldade, A.S. Neverov and L.S. Pinchuk. Influence of electric field of polymer electret on the sorption of organic solvent. Vysokomolecul. Soedinenia, 1982, Vol. B24, No. 9, pp. 683–687.Google Scholar
  62. 62.
    L.S. Pinchuk, V.A. Goldade and A.S. Neverov. On the kinetics of electrochemical processes during metal-polymer pair friction in electrolytes. Soviet J. Friction and Wear, 1980, Vol. 1, No. 4, pp. 88–91.Google Scholar
  63. 63.
    L.S. Pinchuk, A.S. Neverov and V.A. Goldade. On some possibilities of friction pair polarization. Soviet J. Friction and Wear, 1980, Vol. 1, No. 6, pp. 105–107.Google Scholar
  64. 64.
    Yu.I. Voronezhtsev, V.A. Goldade, L.S. Pinchuk and G.V. Rechits. Influence of bulk charge distribution on friction characteristics of polymer electrets. Soviet J. Friction and Wear, 1984, Vol. 5, No. 1, pp. 110–113.Google Scholar
  65. 65.
    I.L. Rozenfeld, F.I. Rubinstein and K.A. Zhigalova. Protection of Metals from Corrosion by Paint Coats. Moscow, Khimiya, 1987.Google Scholar
  66. 66.
    V.A. Belyi and Yu.M. Pleskachevsky. Metal-Polymer Systems. Moscow, Znanie, 1982.Google Scholar
  67. 67.
    V.A. Goldade, L.S. Pinchuk and V.V. Snezhkov. Structural orientation and electric polarization of polymers in stationary magnetic fields. Proc. 7th Intern. Symp. on Electrets, 1991, pp. 316–321.Google Scholar
  68. 68.
    U.S.S.R. Patent 1165588, B 29 C 33/00. Device for production of goods from polymer materials. I.M. Vertyachikh, Yu.I. Voronezhtsev, V.A. Goldade and L.S. Pinchuk, 1985.Google Scholar
  69. 69.
    U.S.S.R. Patent 1014844, C 08 J 5/16. Method of manufacturing articles of polymer compositions. I.M. Vertyachikh, V.A. Goldade, A.S. Neverov and L.S. Pinchuk, 1983.Google Scholar
  70. 70.
    U.S.S.R Patent 1055913, F 16 C 33/04. Sleeve bearing. L.S. Pinchuk, I.M. Vertyachikh, Yu.I. Voronezhtsev, et al., 1983.Google Scholar
  71. 71.
    U.S.S.R Patent, C 10 M 7/02. A lubricant for friction joints. V.A. Goldade, A.S. Neverov, L.S. Pinchuk, et al., 1980.Google Scholar
  72. 72.
    V.A. Goldade. On adhesive strength and protective properties of polymer composite coatings. Mechanics of Composite Materials, 1981, No. 5, pp. 841–845.Google Scholar
  73. 73.
    V. Ashworth and C.J.L. Booker, eds. Cathodic Protection Theory and Practice. Ellis Horwood, Chichester UK, 1986.Google Scholar
  74. 74.
    O.S. Zheglov, V.Yu. Sokolov and V.M. Kremeshnyi. Service life improving of partially mobile hinges under conditions of corrosion-mechanical wear. Soviet J. Friction and Wear, 1982, Vol. 3, No. 5, pp. 57–65.Google Scholar
  75. 75.
    K.N. Stafford, P.K. Datta and C.G. Googan, eds. Coatings and Surface Treatments for Corrosion and Wear Resistance. Ellis Horwood, Chichester UK, 1984.Google Scholar
  76. 76.
    G.E. Lazarev, T.L. Kharlamova and V.I. Vereikin. Electrochemical methods for improving the wear resistance of graphite-steel friction pairs lubricated by liquid aggressive media. Soviet J. Friction and Wear, 1985, Vol. 6, No. 1, pp. 89–92.Google Scholar
  77. 77.
    V.N. Kestelman. Physical Methods of Polymer Materials Modification. Moscow, Khimia, 1980.Google Scholar
  78. 78.
    V.A. Zakrevsky, E.U. Tomashevsky and V.V. Baptizmansky. EPR of places of macromolecular rupture in polyamides subjected to mechanical breakage. Solid State Physics, 1967, Vol. 9, No. 5, pp. 1434–1441.Google Scholar
  79. 79.
    P.Yu. Butyagin, A.M. Dubinskaya and V.A. Radtsyg. EPR spectra, conformation and chemical properties of free radicals in solid polymers. Successes in Chemistry, 1969, Vol. 38, No. 4, pp. 593–623.Google Scholar
  80. 80.
    N.M. Emanuel and A.L. Buchachenko. Chemical Physics of Aging and Stabilization of Polymers. Moscow, Nauka, 1982.Google Scholar
  81. 81.
    N.K. Baramboim. Mechanochemistry of High-Molecular Compounds. Moscow, Khimiya, 1978.Google Scholar
  82. 82.
    P._Yu. Butyagin. Mechanochemistry of Polymers. In: Encyclopedia of Polymers. Moscow, Soviet Encyclopedia, 1974, Vol. 2, pp. 241–247.Google Scholar
  83. 83.
    V. Korshak, I. Gribova and A. Krasnov. Tribochemical reactions and wear resistance of polymers of the polyphenylene type. Intern. Conf. Wear of Materials, Houston, Texas, 1987, Vol. 1, No. 1, pp. 435–438.Google Scholar
  84. 84.
    V. Korshak, I. Gribova, A. Krasnov and G. Mamatsashvili. Tribochemical transformations and wear resistance of materials based on the cross-linking polymers. Intern. Conf. Evrotrib-81, 1981, Vol. 1, p. 189.Google Scholar
  85. 85.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Study of tribochemical transformations in friction of copolymer of formaldehyde with 1,3-Dioxolan. Soviet J. Friction and Wear, 1988, Vol. 9, No. 5, pp. 1–5.Google Scholar
  86. 86.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Tribochemical transformations in polycaproamide. Vysokomolecul. Soedinenia, 1987, Vol. A29, No. 8, pp. 1699–1704.Google Scholar
  87. 87.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Tribochemical processes and wear resistance of polymeric materials. ASLE Trans., 1983, Vol. 26, No. 3, pp. 401–404.Google Scholar
  88. 88.
    A.P. Krasnov, I.A. Gribova and A.N. Chumayevskaya. Chemical structure of polymers and tribochemical transformations in polymers and filled systems. J. Friction and Wear, 1997, Vol. 18, No. 2, pp. 110–126.Google Scholar
  89. 89.
    V.A. Struk. Role of the tribochemical factor in metal-polymer friction assembly development. Soviet J. Friction and Wear, 1987, Vol. 8, No. 2, pp. 71–77.Google Scholar
  90. 90.
    A.P. Krasnov, L.B. Makina, S.Yu. Panov and V.A. Mit. Peculiarities of friction surface formation of aliphatic polymers. J. Friction and Wear, 1996, Vol. 17, No. 3, pp. 87–89.Google Scholar
  91. 91.
    A.P. Krasnov, L.B. Makina, L.Ya. Nikiforova, et al. The surface layer structure of Ultra High Molecular Weight Polyethylene at friction against steel counterface. J. Friction and Wear, 1993, Vol. 14, No. 5, pp. 53–57.Google Scholar
  92. 92.
    D. Landheer and C.J.M. Meesters. Friction and wear of PTFE compounds. Kunststoffe, 1993, Vol. 83, No. 12, pp. 996–1001.Google Scholar
  93. 93.
    I. Sugimoto and S. Miyake. High lubrication performance of tribologically oriented fluore polymer molecules analyzed by polarized infrared microscopy. J. Appl. Phys., 1990, Vol. 67, No. 9, pt. 1, pp. 4083–4089.CrossRefGoogle Scholar
  94. 94.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Tribochemical processes and wear resistance in Polyphenylene polymers. Soviet J. Friction and Wear, 1985, Vol. 6, No. 6, pp. 1–6.Google Scholar
  95. 95.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Investigation of high-temperature pressing of prepolyphenylene based on 4, 4′-diacetyl diphenyloxide. Vysokomolecul. Soedinenia, 1984, Vol. A26, No. 12, pp. 2625–2631.Google Scholar
  96. 96.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Chemical transformation in friction of filled phenolformaldehyde polymer. Soviet J. Friction and Wear, 1985, Vol. 6, No. 5, pp. 9–13.Google Scholar
  97. 97.
    A. Pogosian, A. Karapetian and K. Oganesian. Tribochemical processes and wear of composite polymer materials. Intern. Conf. Wear of Materials, Denver, Colorado, 1989, Vol. 7, No. 2, pp. 521–528.Google Scholar
  98. 98.
    A.P. Krasnov, I.K. Taratuta and L.B. Makina. Triboengineering aspects of improving wear resistance of commercial polymers. In: Practical Tribology. World Experience. Ser. 1: Intern. Eng. Encyclopaedia, Moscow, Center of Science and Technology, 1994, pp. 170–172.Google Scholar
  99. 99.
    A.P. Krasnov, I.K. Taratuta, G.I. Gureeva, et al. The nature of Poly(arylenetherketone) self-lubricity. J. Friction and Wear, 1994, Vol. 15, No. 3, pp. 68–72.Google Scholar
  100. 100.
    W. Korniluk and K. Dubicki. Tribological properties of Polyamide-6. Polymery (Poland), 1988, Vol. 33, No. 6, pp. 231–233.Google Scholar
  101. 101.
    V.V. Korshak, I.A. Gribova, G.I. Gureeva, et al. Friction of copolymers of ε-caprolactam with ω-dodecalactam. Soviet J. Friction and Wear, 1983, Vol. 4, No. 6, pp. 1–5.Google Scholar
  102. 102.
    V.V. Korshak, S.V. Vinogradova, I.A. Gribova, et al. Friction properties of mixtures of aromatic polyamides obtained by matrix polycondensation. Soviet J. Friction and Wear, 1989, Vol. 10, No. 3, pp. 145–146.Google Scholar
  103. 103.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Study of surface layers during friction of filled polymer system based on polyphenylquinoxaline (PPQ). Soviet J. Friction and Wear, 1981, Vol. 2, No. 2, pp. 22–25.Google Scholar
  104. 104.
    V.V. Korshak, I.A. Gribova and A.P. Krasnov. On the phenomenon of tribochemical lubrication at friction of heterochain polymers. Vysokomolecul. Soedinenia, 1985, Vol. B27, No. 5, pp. 323–324.Google Scholar
  105. 105.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Antifriction properties and wear resistance of plastics based on cross-linked polyphenylquinoxaline. Soviet J. Friction and Wear, 1981, Vol. 2, No. 3, pp. 118–121.Google Scholar
  106. 106.
    A.Yu. Shaulov. On triboengineering effects in dispersion-filled polymers. Vysokomolecul. Soedinenia, 1990, Vol. A32, No. 11, pp. 2335–2339.Google Scholar
  107. 107.
    V.V. Korshak, I.A. Gribova, A.P. Krasnov, et al. Effect of thermodynamic flexibility of polyphenyl quinoxalines on their thermofrictional properties. Vysokomolecul. Soedinenia, 1979, Vol. A21, No. 10, pp. 2214–2220.Google Scholar
  108. 108.
    A.A. Vojno, W.A. Struk and W.G. Sawkin. Physikalisch-chemische Aspeckte bei Herstellung und Anwendung von verschleissfesten Kompositionswerkstoffen SAM. Schmierungstechnik, 1984, No. 5, pp. 148–151.Google Scholar
  109. 109.
    V.A. Struk. Effect of composition and topography of surface compounds of metal counterbody on wear of metal-polymer friction pair. In: Mechanics and Physics of Contact Interactions. Kalinin, Kalinin State University, 1979, pp. 69–76.Google Scholar
  110. 110.
    V.A. Struk. On mechanochemical concept of wear of metal-polymer friction pairs. Proc. Belarus AS, 1987, Vol. 31, No. 3, pp. 223–226.Google Scholar
  111. 111.
    V.A. Struk and Yu.M. Pleskachevskii. On corrosion-mechanical concept of wear for tribological metal-polymer structures. Proc. Intern. Conference on Tribology “Friction, Lubrication and Wear”, London, 1987, pp. 339–344.Google Scholar
  112. 112.
    A.V. Nikolskii, A.T. Korzakov and V.N. Kravchenko. Dynamic change of chemical state of friction surfaces of metal-polymer pair in the frictional interaction process. Soviet J. Friction and Wear, 1988, Vol. 9, No. 5, pp. 73–79.Google Scholar
  113. 113.
    V.I. Nefedov. X-Ray Electronic Spectroscopy of Chemical Compounds. Ref. Book. Moscow, Khimiya, 1984.Google Scholar
  114. 114.
    N.I. Egorenkov. Variation regularities of adhesive, frictional, and physicalchemical properties of polymer films on metals under thermal effects. Dr. Chem. Sci. Thesis, Kiev, 1986.Google Scholar
  115. 115.
    S.S. Pesetskii and O.N. Alexandrova. Effect of dicarbonic acids on adhesive interaction of polyamide films with copper. Colloidal J., 1990, Vol. 52, No. 2, pp. 302–308.Google Scholar
  116. 116.
    L. Pinchuk. Corrosion factor in metal-polymer wear. Proc. 5th Intern. Sympos “Intertribo-93 ”, Bratislava, 1993, Vol. 3, pp. 52–56.Google Scholar
  117. 117.
    V.G. Savkin, V.M. Ken’ko and V.A. Struk. Some physico-chemical aspects of frictional interaction of metal-polymer systems. Proc. Intern. Conf. Intertribo-81, Vysoki Tatry, 1981, Vol. 1, pp. 172–179.Google Scholar
  118. 118.
    V.A. Belyi, V.G. Savkin and V.A. Struk. Effect of counterface origin on tribochemical phenomena in metal-polymer contacts. Proc. Intern. Conf. Eurotrib-85, Paris, 1985, Vol. 2, part 5-111, pp. 1–5.Google Scholar
  119. 119.
    V.A. Goldade, A.S. Neverov and L.S. Pinchuk. Polymer inhibited materials of structural purposes. Proc. Belarus AS, 1981, Vol. 25, No. 12, pp. 1100–1103.Google Scholar
  120. 120.
    V.A. Goldade, A.S. Neverov and L.S. Pinchuk. Engineering materials based on polymer gels. New in Machine-Building, 1979, No. 9, pp. 68–69.Google Scholar
  121. 121.
    V.A. Goldade, L.S. Pinchuk and V.A. Struk. Plastics containing corrosion inhibitors. 10th Intern. Congress on Metallic Corrosion, Madras (India), 1987, Oxford and IBH Publ. Co., Vol. 3, pp. 2861–2870.Google Scholar
  122. 122.
    S.P. Papkov. Physico-Chemical Bases of Processing Polymer Solutions. Moscow, Khimiya, 1971.Google Scholar
  123. 123.
    V.A. Goldade, A.S. Neverov and L.S. Pinchuk. Low-Modular Composite Materials Based on Thermoplastics. Minsk, Nauka i Tekhnika, 1984.Google Scholar
  124. 124.
    A.V. Efimov, P.V. Kozlov and N.F. Bakeev. Phenomena of plastification and antiplastification in polymer glasses. Proc. USSR AS, 1976, Vol. 230, No. 3, pp. 639–641.Google Scholar
  125. 125.
    W.J. Jackson and J.R. Galdwell. Antiplasticization. III. Characteristics and properties of antiplasticizable polymers. J. Appl. Polym. Sci., 1967, Vol. 11, No. 2, pp. 227–244.CrossRefGoogle Scholar
  126. 126.
    L.M. Rodeson and J.A. Faucher. Secondary loss transition in antiplasticized polymers. J. Polym. Sci., B, 1969, Vol. 7, No. 1, pp. 35–40.Google Scholar
  127. 127.
    A.S. Neverov. Antiplastification in polyethylene-mineral oil systems. Trans. Belarus AS, ser. Phys.-Techn. Sci., 1978, No. 4, pp. 70–73.Google Scholar
  128. 128.
    G.V. Rechits, L.S. Pinchuk, A.S. Neverov and V.A. Goldade. On the kinetics of electrochemical processes in friction of polymer composites containing corrosion inhibitors. Soviet J. Friction and Wear, 1982, Vol. 3, No. 2, pp. 93–96.Google Scholar
  129. 129.
    UK Patent 2186882, C 08 L 77/00, C 08 J 5/16. Self-lubricating antifriction composition. L.S. Pinchuk, V.A. Struk, V.A. Goldade, et al., 1989.Google Scholar
  130. 130.
    U.S.S.R. Patent 1051915, C 08 L 59/00, C 08 J 77/00. Self-lubricating antifriction material. V.A. Struk, G.G. Kolyago, A.F. Manulenko, et al., 1983.Google Scholar
  131. 131.
    U.S.S.R. Patent 1420916, C 08 L 23/26, C 08 K 5/00, C 08 J 5/16. Compound for antifriction material manufacturing. V.A. Struk, L.S. Pinchuk, V.A. Goldade, et al., 1988.Google Scholar
  132. 132.
    U.S.S.R. Patent 1607364, C 08 J 5/16, C 08 L 77/02. Inhibited antifriction material. L.S. Pinchuk, V.A. Struk, V.A. Goldade, et al., 1990.Google Scholar
  133. 133.
    U.S.S.R. Patent 970870, C 09 K 3/10, C 08 L 77/00. Hermetizing material. V.A. Goldade, A.S. Neverov, L.S. Pinchuk, et al., 1982.Google Scholar
  134. 134.
    U.S.S.R. Patent 1722021, C 08 J 5/16, C 08 L 77/06. Antifriction hermetizing compound. L.S. Pinchuk, E.N. Aleshkevich, G.V. Rechits, et al., 1991.Google Scholar
  135. 135.
    U.S.S.R. Patent 1075712, C 08 L 75/04, C 08 L 59/04. Thermoplastic preformed compound. V.A. Struk, G.G. Kolyago, L.S. Pinchuk, et al., 1983.Google Scholar
  136. 136.
    U.S.S.R. Patent 759570, C 09 K 3/10, F 16 J 15/20. Hermetizing material. V.A. Belyi, V.A. Goldade, A.S. Neverov, et al., 1980.Google Scholar
  137. 137.
    L.S. Pinchuk. Hermetology. Minsk. Nauka i Tekhnika, 1992.Google Scholar
  138. 138.
    The OILES Bearing. Catalogue No. EC-200-5, OILES Corporation, Tokyo, Japan.Google Scholar
  139. 139.
    Belarus Patent No. 394, C 08 J 3/18. A method of manufacturing composites based on thermoplastic polyamides or polyolefines. V.A. Goldade, A.S. Neverov and L.S. Pinchuk, 1994.Google Scholar
  140. 140.
    U.S.S.R. Patent 1603725, C 08 J 5/16, B 29 C 39/38. A method of manufacturing articles. L.S. Pinchuk, V.A. Goldade, V.V. Lisovsky, et al., 1990.Google Scholar
  141. 141.
    T.A. Osswald, L.-S. Turng and P.J. Gramman, eds. Injection Molding Handbook. Munchen, Hanser, 2001.Google Scholar
  142. 142.
    G. Pötsch and W. Michaeli. Injection Molding: An Introduction. Munchen, Hanser, 1995.Google Scholar
  143. 143.
    W. Michaeli. Plastics Processing: An Introduction. Munchen, Hanser, 1995.Google Scholar
  144. 144.
    U.S.S.R. Patent 887588, C 08 J 5/02. Method for producing polymer goods. V.A. Goldade, A.S. Neverov, L.S. Pinchuk and I.M. Vertyachikh, 1981.Google Scholar
  145. 145.
    U.S.S.R. Patent 1237683, C 08 L 67/06, C 08 J 5/16. Antifrictional compound. G.G. Kolyago, A.F. Manulenko, V.A. Struk, et al., 1986.Google Scholar
  146. 146.
    U.S.S.R. Patent 568773, F 16 J 15/00. Production method of materials for seals. V.A. Belyi, V.A. Goldade, A.S. Neverov and L.S. Pinchuk, 1977.Google Scholar
  147. 147.
    V.A. Belyi, V.I. Vrublevskaya and B.I. Kupchinov. Wood-Polymer Structural Materials and Goods. Minsk, Nauka i Tekhnika, 1980.Google Scholar
  148. 148.
    K.M. Gilman, V.A. Goldade, F.S. Mamedov, et al. Antirust sealing material based on polyethylene. Corrosion and Rust Prevention in Oil and Gas Industry, 1980, No. 2, pp. 27–29.Google Scholar
  149. 149.
    Belarus Patent 1954, F 16 J 15/32. Piston for slush pump. I.M. Vertyachikh, V.A. Goldade and L.S. Pinchuk, 1997.Google Scholar
  150. 150.
    I.M. Vertyachikh, V.A. Goldade. Reduction of erosion and mechanical wear of drill mud pump seals. J. Friction and Wear, 1995, Vol. 16, No. 3, pp. 150–152.Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2005

Personalised recommendations