Friction pressure drop


Pressure Drop Slug Flow Pressure Loss Coefficient Friction Pressure Heated Channel 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Abuaf N, Zimmer GA, Saha P (June 1981) A study of non equilibrium flashing of water in a converging diverging nozzle, vol 1 Experimental, vol 2 Modeling, NUREG/CR-1864, BNL-NUREG-51317Google Scholar
  2. 2.
    Avdeev AA (1983) Hydrodynamics of turbulent bubble two phase mixture, High Temperature Physic, vol 21 no 4 pp 707–715, in RussianGoogle Scholar
  3. 3.
    Avdeev AA (1986) Application of the Reynolds analogy to the investigation of the surface boiling in forced convection, High Temperature Physics, vol 24 no 1 pp 111–119, in Russian.Google Scholar
  4. 4.
    Chisholm D (1983) Two-phase flow in pipelines and heat exchanger, George Godwin, London and New York, p 110Google Scholar
  5. 5.
    Ergun S (1952) Fluid flow through packed columns, Chem. Eng. Prog. vol 48 no 2 pp 89–94Google Scholar
  6. 6.
    Friedel L (1979) New friction pressure drop correlations for upward, horizontal, and downward two-phase pipe flow. Presented at the HTFS Symposium, Oxford, September 1979 (Hoechst AG Reference No. 372217/24 698)Google Scholar
  7. 7.
    Gunter A Y, Shaw WA (1945) A general correlation of friction factors for various types of surfaces in cross flow, ASME Trans., vol 57 pp 643–660Google Scholar
  8. 8.
    Hetstroni G (1982) Handbook of multiphase systems. Hemishere Publ. Corp., Washington etc., McGraw-Hill Book Company, New York etc.Google Scholar
  9. 9.
    Idelchik IE (1975) Handbook of hydraulic resistance, Second edition, Hemisphere, Washington, 1986, translation o a Russian editionGoogle Scholar
  10. 10.
    Lockhart RW, Martinelli RC (1949) Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chem. Eng. Prog., vol 45 no 1 pp 39–48Google Scholar
  11. 11.
    Martinelli RC, Nelson DB (1948) Prediction of pressure drop during forced circulation boilng of water, Trans. ASME, vol 70, p 695Google Scholar
  12. 12.
    Minagawa H (1990) Pressure drop for liquid-gas-solid-slug flow, Kobe University, private communicationGoogle Scholar
  13. 13.
    Nigmatulin BI (1982) Heat and mass transfer and force interactions in annular-dispersed two-phase flow, 7th Int. Heat Transfer Conf., Munich, pp 337–342Google Scholar
  14. 14.
    Palazov V (31. July 1991) Prediction of single-phase friction pressure losses in a converging-diverging nozzle, Private communicationGoogle Scholar
  15. 15.
    Ransom VH et al. (1988) RELAP5/MOD2 Code Manual Volume 1: Code Structure, System Models, and Solution Methods, NUREG/CR-4312 EGG-2396, rev 1, pp 209–216Google Scholar
  16. 16.
    Sakagushi T, Minagawa H, Tomyama A, Shakutsui H (1989) Characteristics of pressure drop for liquid-solid two-phase flow in vertical pipes, Reprint from Memories of the faculty of engineering, Kobe University, no 36 pp 63–90Google Scholar
  17. 17.
    Staengel G, Mayinger F (March 23–24, 1989) Void fraction and pressure drop in subcooled forced convective boiling with refrigerant 12, Proc. of 7th Eurotherm Seminar Thermal Non-Equilibrium in Two-Phase Flow, Roma, pp 83–97Google Scholar
  18. 18.
    Tomyama A, Sakagushi T, Minagawa H (1990) Kobe University, private comunicationGoogle Scholar
  19. 19.
    Zheng Q et al. (1991) Druckverlust in glatten und innenberippten Verdampferrohren, Wärme-und Stoffübertragung, vol 16 pp 323–330CrossRefGoogle Scholar
  20. 20.
    Haland SE (1983) Simple and explicit formulas for the friction factor in turbulent pipe flow, J. Fluids Eng., vol 98 pp 173–181Google Scholar
  21. 21.
    Kirilov PL, Yur’ev YuS an Bobkov VP (1990) Handbook of thermal-hydraulic calculations, in Russian, Energoatomizdat, Moscow, Russia, pp 130–132Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2005

Personalised recommendations