IAG 150 Years pp 703-709 | Cite as

Predicting and Correcting Scale Induced Biases Resulting from the Application of Regional Orbit and Clock Corrections

  • Lennard HuismanEmail author
  • Peter J. G. Teunissen
Conference paper
Part of the International Association of Geodesy Symposia book series (IAG SYMPOSIA, volume 143)


Real-time orbit and clock corrections to GPS broadcast ephemeris, in short broadcast corrections (BCs), have become available as International GNSS Service (IGS) products through the IGS Real-time Service (RTS) in 2013. The BCs are distributed via the Network Transport of RTCM by Internet Protocol (NTRIP) according to RTCM State Space Representation standards. When applying the BCs in real-time Precise Point Positioning (PPP), user positions with sub-decimetre precision after convergence can be obtained. The IGS BCs refer to the International Terrestrial Reference Frame 2008 (ITRF2008). BCs in regional reference frames (RBCs) are available through regional NTRIP broadcasters in Europe, North-America, South-America and Australia. The IGS RTS website states that: Applying orbit and clock corrections from regional product streams in a real-time PPP solution automatically leads to regional coordinates. The PPP client would not need to transform coordinates because that is already done on the server side. However, in contrast to the PPP-approach that uses BCs in ITRF2008 followed by a transformation to the local datum, the approach based on RBCs causes a bias in the PPP solution due to the scale factor between regional and global reference frames. This scale induced bias is satellite geometry dependent when the conventional 14-parameter transformation from the global to the regional reference frame is applied to the satellite position vectors in ITRF2008, to derive the RBCs from the IGS BCs. The size of the scale induced bias is significant. The bias is up to 8 cm for the Australian GDA94 and up to 0.5 cm for the North American NAD83. Currently an additional satellite position dependent value is added to the satellite clock correction to deal with the scale induced biases of three RBCs, resulting in a transformed clock correction (Weber, BKG Ntrip Client (BNC) Version 2.9 – Manual, 2013). Applying these transformed clocks results in a remaining scale induced bias of less then 10 mm for each RBC of ETRF2000, NAD83 and SIRGAS2000. For GDA94 the remaining scale induced bias is maximum 30 m, this is caused by the large scale factor of GDA94 compared to other regional reference frames. This contribution will show that the remaining bias in the PPP solution is practically independent from satellite geometry and depends mainly on the user position; hence the remaining bias can be predicted and corrected for at any location.


Global and regional broadcast corrections Global and regional reference frames Real-time precise point positioning 



The second author is the recipient of an Australian Research Council (ARC) Federation Fellowship (project number FF0883188). Part of this work was done in the framework of the project ‘New Carrier-Phase Processing Strategies for Next Generation GNSS Positioning’ of the Cooperative Research Centre for Spatial Information (CRC-SI2).


  1. Caissy M, Agrotis L, Weber G, Hernandez-Pajares M, Hugentobler H (2012) Innovation-coming soon-the international gnss real-time service. GPS World 23(6):52Google Scholar
  2. Hauschild A, Montenbruck O (2009) Kalman-filter-based GPS clock estimation for near real-time positioning. GPS Solutions 13(3):173–182CrossRefGoogle Scholar
  3. Huisman L, Teunissen PJG, Hu C (2012) GNSS precise point positioning in regional reference frames using real-time broadcast corrections. J Appl Geod 6(1):15–23Google Scholar
  4. (2013) Real-time service.
  5. Kouba J (2002) The GPS toolbox ITRF transformations. GPS Solutions 5:88–90. doi: 10.1007/PL00012903.
  6. Kouba J (2009) A guide to using International GPS Service (IGS) products. Publication of the IGS Central Bureau, Online at
  7. Rebischung P, Griffiths J, Ray J, Schmid R, Collilieux X, Garayt B (2012) IGS08: the IGS realization of ITRF2008. GPS Solutions 16(4):483–494. doi: 10.1007/s10291-011-0248-2.
  8. RTCM (2011) RTCM-10410.1 Standard for Networked Transport of RTCM via Internet Protocol (Ntrip), Version 2.0 with Amendment 1, June 28, 2011Google Scholar
  9. Takasu T (2010) Real-time PPP with RTKLIB and IGS real-time satellite orbit and clock. In: IGS WorkshopGoogle Scholar
  10. Teunissen PJG, Huisman L, Hu C (2012) Real-time precise point positioning in NAD83: global and regional broadcast corrections compared. J Surv Eng 139(1):1–10CrossRefGoogle Scholar
  11. Weber G (2013) BKG Ntrip Client (BNC) Version 2.9 – Manual. Federal Agency for Cartography and Geodesy (BKG). Frankfurt, GemanyGoogle Scholar
  12. Weber G, Dettmering D, Gebhard H, Kalafus R (2005) Networked transport of RTCM via internet protocol (Ntrip)-IP-streaming for real-time GNSS applications. In: ION GNSS 18th International Technical Meeting of the Satellite Division, pp 13–16Google Scholar

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  1. 1.KadasterApeldoornThe Netherlands
  2. 2.Delft University of TechnologyDelftThe Netherlands
  3. 3.Curtin UniversityBentleyAustralia

Personalised recommendations