Abstract
Within the automotive industry, micro-electro-mechanical-systems (MEMS) technology has contributed to the improved performance, reliability and lower-cost sensors that support basic automobile functions, including driving, turning, and stopping. Future goals of the automobile industry must target the development of environmentally friendly cars that are capable of obtaining higher gas mileage, are safer, and more comfortable. Also, these cars should be capable of the reception and transmission of necessary information. At this time the automotive industry is currently focusing its R&D on ultra-low emission vehicles and intelligent transport systems (ITS). MEMS technology is expected to play an extremely important role in this future direction of R&D in the automotive field, particularly in achieving higher levels of safety. The integration of MEMS technology in various devices is essential so that the system maintains a high level of reliability and mass productivity. This paper discusses how MEMS technologies are used in current vehicles and will have been used in the future vehicles.
Keywords
- microsystem
- MEMS
- sensors
- engine control
- safe systems
- ITS
- fabrication technology
- DRIE
- AHS
- internet ITS
This is a preview of subscription content, access via your institution.
Buying options
Preview
Unable to display preview. Download preview PDF.
7 References
Report of Sensor Production X VII, the Japan Electronics and Information Technology Industries Association (JEITA), (2004) p. 72
Touma FUJIKAWA, “MEMS for Automotive Electronics Systems”, Proceedings of the 10th International Micromachine/Nanotech Symposium, Tokyo, Japan, November 11, p.14, (2004)
Y. Suzuki, M. Imai, T. Mizuno and I. Yokomori, “Evolution of Automotive Semiconductor Pressure Sensors”, DENSO Technical Review, Vol.6, No.1, 2001, p.96–100
J. Marek, and et. al: “Sensors for Automotive Technology”, p.314, WILEY VCH(2003)
Kunihiko Hara, “Micromachine Strategy in Automotive Industry”, Proceeding of the 8th World Micromachine Summit, Maastricht, The Netherlands.
ITARDA URL; http://www.itarda.or.jp/info33/info33_1.htm#part1
K. Osugi, K. Miyauchi, N. Furui and H. Miyakoshi, “Development of the Scanning Laser Radar for ACC system”, DENSO Technical Review, Vol.6, No.1, 2001, p.43–48
TOYOTA MOTOR CORPORATION, URL; http://www.toyota.co.jp/jp/tech/safety/active/vsc.html
Steven Shladover, California PATH Program, “Intersection Decision Support”, Proceeding of the IVI National Meeting and Demonstration, June 24–26, 2003, Washington DC, URL: http://wwwpath.eecs.berkeley.edu/
F. Larmer, A. Schip, K. Funk, M. Offenberg, BOSCH DEEP SILLICON ETCHING:IMPROVING UNIFORMITY AND ETCH RATE FOR ADVANCED MEMS APPLICATIONS, Technical Digest MEMS’99, Florida, USA, 1999, pp211–216
K. Kuhl, S. Vogel, U. Schaber, R. Schafflik, B. Hillerich, Advanced silicon trenchetching in MEMS applications, Part of the SPIE Conference on Micromachining and Microfabrication Process Technology, California, September, 1998, pp.97–105
R. Yeh, S. Hollar, and K. S. J. Pister, SINGLE MASK, LARGE FORCE, AND LARGE DISPLACEMENT ELECTROSTATIC LINEAR INCHWORM MOTORS, Technical Digest MEMS2001, Interlaken, Switzerland, 2001, pp.260–264
J. Ohara, K. Kano, Y. Takeuchi, IEEJ Transaction on Sensors and Micromachines, Vol.123, No.12, 2003, p.541
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag London Limited
About this paper
Cite this paper
Ueno, Y., Kawahara, N. (2007). Microsystem Technologies for Automotive Applications. In: Towards Synthesis of Micro-/Nano-systems. Springer, London . https://doi.org/10.1007/1-84628-559-3_3
Download citation
DOI: https://doi.org/10.1007/1-84628-559-3_3
Publisher Name: Springer, London
Print ISBN: 978-1-84628-558-5
Online ISBN: 978-1-84628-559-2
eBook Packages: EngineeringEngineering (R0)