Abstract
In order to establish a rational impact resistant design procedure for prototype reinforced concrete (RC) structures, not only experimental study but also numerical analysis study should be conducted. However, numerical analysis method on impact response analysis for those structures has not been established yet. Here, in order to establish a rational numerical analysis method for prototype RC structures under impact loading, a falling-weight impact test was conducted for prototype RC girder with 8 m clear span. Referring to the experimental response waves, numerical accuracy was investigated varying major parameters. From this study, following results were obtained as: (1) fine mesh should be used near supporting gigues; (2) Drucker-Prager yield criterion should be applied which gives better results than von Mises one; and (3) appropriate system damping constant should be set to h = 0.015.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Chen, W.F., 1982, Plasticity in Reinforced Concrete, McGraw-Hill.
Hallquist, J.O., 2000, LS-DYNA User's Manual, Livermore Software Technology Corporation.
Japan Society of Civil Engineers, 1996, Japan Concrete Standard, JSCE [in Japanese].
Japan Society of Civil Engineers, 2004, Practical Methods for Impact Tests and Analysis, Structural Engineering Series 15, JSCE [in Japanese].
Kishi, N., Mikami, H., Matsuoka, K.G. and Ando, T., 1999, Elasto plastic impact behavior analysis of flexure failure type RC beam, Journal of Structural Mechanics and Earthquake Engineering, JSCE, 619(47), 215–233 [in Japanese].
Kishi, N., Nakano, O., Matsuoka, K.G. and Ando, T., 2001, Experimental study on ultimate strength of flexural-failure-typeRC beams under impact loading, in Transactions of the 16th International Conference on Structural Mechanics in Reactor Technology (SMIRT), Paper #1525.
Kishi, N., Mikami, H., Matsuoka, K.G. and Ando, T., 2002, Impact behavior of shear-failure-type RC beams without shear rebar, International Journal of Impact Engineering, 27, 955–968.
Kishi, N., Mikami H, Namba K. and Bhatti A.Q., 2005, Impact response analysis of light weight shear-failure type RC beams with stirrups, Journal of Applied Mechanics JSCE, 8, 471–480 [in Japanese].
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
Kishi, N., Ohno, T., Konno, H., Bhatti, A.Q. (2006). Dynamic Response Analysis for a Large-scale RC Girder Under a Falling-weight Impact Loading. In: Pandey, M., Xie, WC., Xu, L. (eds) Advances in Engineering Structures, Mechanics & Construction. Solid Mechanics and Its Applications, vol 140. Springer, Dordrecht. https://doi.org/10.1007/1-4020-4891-2_8
Download citation
DOI: https://doi.org/10.1007/1-4020-4891-2_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-4890-6
Online ISBN: 978-1-4020-4891-3
eBook Packages: EngineeringEngineering (R0)