Abstract
In current construction practice, lateral strengths of shear wall panels with cold formed steel framing are primarily determined by tests owing to the lack of analytical methods. Meanwhile, the use of numerical methods such as the finite element method has been limited to researchers investigating the behaviour of SWP. Moreover, the finite element method has rarely been employed in design practice to determine the lateral strength of shear wall panels because the modelling is cumbersome. Presented in this paper is an analytical method to determine the ultimate lateral strength of shear wall panels. The method accounts for the factors that affect the behaviour and the strength of shear wall panels, such as material properties and thickness of sheathing, sizes of the C-shape steel studs, spacing of fasteners, and so on. Lateral strengths obtained from the proposed method for sheathing wall panels were compared with those of recent experimental investigations. The results of the comparison demonstrate that the predicted lateral strengths are in good agreement with those of the tests. Therefore, the proposed method is recommended for engineering practice.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
AISI (2004). Standard for Cold-Formed Steel Framing-Lateral Design, American Iron and Steel Institute.
Brandt, G. D. (1982). Rapid Determination of Ultimate Strength of Eccentrically Loaded Bolt Groups, Engineering Journal, American Institute of Steel Construction.
Fulop, L., & Dubina, D. (2004a). Performance of wall-stud cold-formed shear panels under monotic and cyclic loading Part I: Experimental research. Thin-Walled Structures, 42, 321–338.
Fulop, L., & Dubina, D. (2004b). Performance of wall-stud cold-formed shear panels under monotic and cyclic loading Part II: Numerical modelling and performance analysis. Thin-Walled Structures, 42, 339–349.
Gad, E. F., Chandler, A. M., Duffield, C.F., & Stark, G. (1999). Lateral Behaviour of Plasterboard-Clad residential Steel Frames. Journal of Structural Engineering, ASCE, January, 32–39.
Okasha, A. F. (2004). Performance of steel frame / wood sheathing screw connections subjected to monotonic and cyclic loading, Department of Civil Engineering and Applied Mechanics, University of McGill, Montreal, Master's Thesis.
Brockenbrough, R. L. & Associates (1998). Shear Wall Design Guide, American Iron and Steel Institute, Technical Data, RG-9804.
CANPLY (2003). Plywood Design Fundamentals, Canadian Plywood Association.
OSB (1995). OSB Design Manual, Design Rated Oriented Strand Board, Structural Board Association.
Rogers, C. A., Branston, A. E., Boudreault, F. A., & Chen, C. Y. (2004a). Light gauge steel frame / wood panel shear wall test data: summer 2003, Department of Civil Engineering and Applied Mechanics, University of McGill, Montreal, Progress Report.
Rogers, C. A., Branston, A. E., Boudreault, F. A., & Chen, C. Y. (2004b). Steel Frame / Wood Panel Shear Walls: Preliminary Design Information for Use with the 2005 NBCC, 13th Word Conference on Earthquake Engineering.
Serrette, R. L, Escalada, J., & Juadines, M. (1997). Static Racking Behavior of Plywood, OSB, gypsum, and Fiberbond Walls with Metal Framing, Journal of Structural Engineering, ASCE, August 1997, 1079–1086.
Serrette, R. L., Morgan, K. A., & Sorhouet, M. A. (2002). Performance of Cold-Formed Steel-Framed Shear Walls: Alternative Configurations. Light Gauge Steel Research Group, Department of Civil Engineering, Santa Clara University, Final Report LGSRG-06-02.
SSMA (2001). Product technical information. Steel Stud Manufacturers Association. ICBO ER-4943P, Retrieved January, 12, 2004, http://www.ssma.com
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
MartÃnez, J., Xu, L. (2006). Determination Of The Lateral Strength Of Shear Wall Panels With Cold-Formed Steel Frames. In: Pandey, M., Xie, WC., Xu, L. (eds) Advances in Engineering Structures, Mechanics & Construction. Solid Mechanics and Its Applications, vol 140. Springer, Dordrecht. https://doi.org/10.1007/1-4020-4891-2_33
Download citation
DOI: https://doi.org/10.1007/1-4020-4891-2_33
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-4890-6
Online ISBN: 978-1-4020-4891-3
eBook Packages: EngineeringEngineering (R0)