Advertisement

CAD/CAM Research on Radial Non-Circular Gears

  • Jiang Han
  • Dongdong Zhang
  • Lian Xia
Conference paper
  • 552 Downloads
Part of the IFIP International Federation for Information Processing book series (IFIPAICT, volume 207)

Abstract

Based on the comparison with the traditional normal non-circular gears, a new type of radial non-circular gears and its generation method are discussed, and the thought for tooth-by-tooth modification is introduced. In this paper, the whole process from the mathematical analysis to CAD/CAM Integration is discussed, which has an extensive application in the field of flow meters.

Key words

Radial Non-circular Gears Tooth-by-Tooth Modification Injection Mold CAD/CAM Integration 

6. References

  1. 1.
    Li Fusheng, Non-circular Gears (Mechanical Industry Press, Beijing, 1975), PP. 117–145.Google Scholar
  2. 2.
    Wu Xutang and Wang Haigui, Non-circular Gears and Nonuniform-speed-ratio Drive (Mechanical Industry Press, Beijing, 1997), PP. 1–56.Google Scholar
  3. 3.
    Wu Xutang, The Principle of Gear Engagement (Mechanical Industry Press, Beijing, 1984), PP.1–86.Google Scholar
  4. 4.
    Tong S H, Yang D H, Generation of Identical Noncircular Pitch Curves, ASME Journal of Mech Trans Des, 1998, 120(2), PP. 337–341.Google Scholar
  5. 5.
    Chien-Fa Chen, Chung-Biau Tsay, Computerized Tooth Profile Generation and Analysis of Characteristics of Elliptical Gears with Circular-arc Teeth, Journal of Materials Processing Technology 148 (2004), pp. 226–234.CrossRefGoogle Scholar
  6. 6.
    Biing-Wen Bair, Computer Aided Design of Elliptical Gears with Circular-arc Teeth, Mechanism and Machine Theory 39 (2004), pp. 153–168.zbMATHCrossRefGoogle Scholar
  7. 7.
    Chang S L, Tsay C B. Mathematical Model and Undercutting Analysis of Elliptical Gears Generated by Rack Cutters, Mechanism and Machine Theory, 1996, 31(7), pp. 879–890.CrossRefGoogle Scholar
  8. 8.
    Positive Displacement Flow Meter, http://www.chinaflow.com.cn/basic/rongjil3-l.htm.Google Scholar
  9. 9.
    Zheng Wenwei and Wu Kejian, The Theory of Mechanism 7tth ed. (Higher Education Press, Beijing, 2000.8).Google Scholar
  10. l0.
    Fang Xing, Xia Lian, and Han Jiang, Development of A Parametric Function Design System of Involute Gears Based on Pro/Engineer, Journal of Hefei University of Technology, 2004, 27(8), pp. 915–918.Google Scholar
  11. 11.
    Han Yulong, The Unit Design and Dynamic Simulation on Pro/Engineer Wildfire, (Tsinghua University Press, Beijing, 2004.11).Google Scholar
  12. 12.
    Liu Wenjian, Chang Wei, Jin Tianguo and Bai Heming, Technology of CAD/CAM Integration (Harbin Institute of Technology Press, Harbin, 2000.12).Google Scholar
  13. 13.
    Parametric Technology Corporation, Pro/TOOLKIT User’s Guide, Waltham, USA.Google Scholar

Copyright information

© International Federation for Information Processing 2006

Authors and Affiliations

  • Jiang Han
    • 1
  • Dongdong Zhang
    • 1
  • Lian Xia
    • 1
  1. 1.CIMS InsituteHefei University of TechnologyChina

Personalised recommendations