Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. J. van der Plassche, Integrated Analog-to-Analog and Digital-to-Analog Converters, Kluwer Publishers, Boston, 1994.
M. M. Martins and J. A. S. Dias, “CMOS shunt regulators with bandgap reference for automotive environment”, IEE Proceedings Circuits Devices and Systems, vol. 141, pp. 157–161, June 1994.
H. Tanaka et al., “Sub-1-μA dynamic reference voltage generator for battery operated DRAMs”, IEEE Journal of Solid-State Circuits, vol. SC-29, no. 4, pp. 448–453, April 1994.
D. F. Hilbiber, “A new semiconductor voltage standard”, ISSCC Digest Technical Papers, vol. 7, pp. 32–33, 1964.
R. J. Widlar, “Some circuit design techniques for linear integrated circuits”, IEEE Transactions on Circuit Theory, vol. CT-12, no. 4, pp. 586–590, December 1965.
K. K. Kuijk, “A precision reference voltage source”, IEEE Journal of Solid-State Circuits, vol. SC-8, no. 3, pp. 222–226, June 1973.
R. J. Widlar, “Low voltage techniques”, IEEE Journal of Solid-State Circuits, vol. SC-13, no. 6, pp. 838–846, December 1978.
G. C. M. Meijer, P. C. Schmale and K. van Zalinge, “A new curvature-corrected bandgap reference”, IEEE Journal of Solid-State Circuits, vol. SC-17, no. 6, pp. 1139–1143, December 1982.
I. Lee, G. Kim and W. Kim, “Exponential curvature-compensated BiCMOS bandgap references”, IEEE Journal of Solid-State Circuits, vol. SC-29, no. 11, pp. 1396–1403, November 1994.
E. A. Vittoz and O. Neyroud, “A low-voltage CMOS bandgap reference”, IEEE Journal of Solid-State Circuits, vol. SC-14, no. 3, pp. 573–577, June 1979.
G. Tzanateas, C. A. T. Salama and Y. P. Tsividis, “A CMOS bandgap voltage reference”, IEEE Journal of Solid-State Circuits, vol. SC-14, no. 3, pp. 655–657, June 1979.
B. S. Song and P. R. Gray, “A precision curvature-compensated CMOS bandgap reference”, IEEE Journal of Solid-State Circuits, vol. SC-18, no. 6, pp. 634–643, December 1983.
S. L. Lin and C. A. T. Salama, “A Vbe(T) model with the application to bandgap reference design”, IEEE Journal of Solid-State Circuits, vol. SC-20, no. 6, pp. 1283–1285, December 1985.
O. Salminen and K. Halonen, “The higher order temperature compensation of bandgap references”, Proceedings of the IEEE International Symposium on Circuits and Systems, pp. 10–13, May 1992.
E. A. Vittoz, “MOS transistors operated in lateral bipolar mode and their application in CMOS technology”, IEEE Journal of Solid-State Circuits, vol. SC-18, no. 3, pp. 273–279, June 1983.
M. G. R. Degrauwe et al., “CMOS voltage references using lateral bipolar transistors”, IEEE Journal of Solid-State Circuits, vol. SC-20, no. 6, pp. 1151–1156, December 1985.
H. J. Oguey and B. Gerber, “MOS voltage reference based on polysilicon gate work function difference”, IEEE Journal of Solid-State Circuits, vol. SC-15, no. 3, pp. 264–269, June 1980.
G. C. M. Meijer, “Bandgap references”, in: J. H. Huijsing et al. (eds), Analog Circuit Design, Kluwer, Dordrecht, 1995, pp. 243–268.
Y. P. Tsividis, “Accurate analysis of temperature effects in IC-VBE characteristics with application to bandgap reference sources”, IEEE Journal of Solid-State Circuits, vol. SC-15, no. 6, pp. 1076–1084, December 1980.
J. W. Slotboom and H. C. de Graaf, “Bandgap narrowing in silicon bipolar transistors”, Solid-State Electronics, vol. 19, pp. 857–862, October 1976.
A. van Staveren, “Structured electronic design of high-performance low-voltage low-power references”, Ph.D. thesis Delft University of Technology, Delft University Press, ISBN 90-407-1448-7, May 1997.
Y. P. Varshni, “Temperature dependence of the energy gap in semiconductors”, Physica, vol. 34, pp. 149–154, 1967.
MicroSim Corporation, “Manual Pspice 4.05”.
I. E. Getrue, Modeling the Bipolar Transistor, Elsevier, New York, 1978.
L. K. Nanver, E. J. G. Goudena and H. W. van Zeijl, “DIMES-01, a baseline BIFET process for smart sensor experimentation”, Sensors and Actuators Physical, vol. 36, no. 2, pp. 139–147, 1993.
V. I. Anisimov et al., “Circuit design for low-power reference voltage sources”, Telecommunications and Radio Engineering, Part 1, vol. 48, no. 1, pp. 11–17, 1993.
E. H. Nordholt, Design of High-Performance Negative-Feedback Amplifiers, Elsevier, Amsterdam, 1983.
A. P. Brokaw, “A simple three-terminal IC bandgap reference”, IEEE Journal of Solid-State Circuits, vol. SC-9, no. 6, pp. 388–393, December 1974.
A. van Staveren, C.J.M. Verhoeven and A.H.M. van Roermund, “The design of low-noise bandgap references”, IEEE Transactions on Circuits and Systems, vol. 43, no. 4, pp. 290–300, April 1996.
A. van Staveren, “Chapter 5, Integrable DC sources and referenes”, in: W. A. Serdijn, C. J. M. Verhoeven and A. H. M. van Roermund (eds), Analog IC Techniques for Low-Voltage Low-Power Electronics, Delft University Press, 1995.
A. van Staveren, J. van Velzen, C. J. M. Verhoeven and A. H. M. van Roermund, “An integratable second-order compensated bandgap reference for 1 V supply”, Analog Integrated Circuits and Signal Processing, vol. 8, pp. 69–81, 1995.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Kluwer Academic Publishers
About this chapter
Cite this chapter
van Staveren, A., Kouwenhoven, M.H.L., Serdijn, W.A., Verhoeven, C.J.M. (2002). Bandgap Reference Design. In: Toumazou, C., Moschytz, G., Gilbert, B., Kathiresan, G. (eds) Trade-Offs in Analog Circuit Design. Springer, Boston, MA. https://doi.org/10.1007/0-306-47673-8_5
Download citation
DOI: https://doi.org/10.1007/0-306-47673-8_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-7037-2
Online ISBN: 978-0-306-47673-0
eBook Packages: Springer Book Archive